Jump to content
SAU Community

Recommended Posts

hey guys, got through the first tank on the new car and got about 250km outta 48ltrs. =about 18L/100. im guessing my o2's have never been replaced so im on the hunt for some. had a brows on the forum but the only place i can find them is at kudos motorsport which are originals for 480bux. anyone know where i can get them from cheaper?? if not them i think ill get the pfc tuned without the o2's working.

Link to comment
https://www.sau.com.au/forums/topic/349334-02-sensors-for-33-gtr/
Share on other sites

wiring is no problems. i know the tuning hadnt been done in a long time ten four but it probably needs new ones anyway. i have a look on the new for those o2' and see what i can come up with. i recon the car should be getting around the 14L/100 around town and 12 on the highway. the 18L/100 is on 10psi so its real bad but will get it sorted.

thanks guys

wiring is no problems. i know the tuning hadnt been done in a long time ten four but it probably needs new ones anyway. i have a look on the new for those o2' and see what i can come up with. i recon the car should be getting around the 14L/100 around town and 12 on the highway. the 18L/100 is on 10psi so its real bad but will get it sorted.

thanks guys

You should be able to get better than the figures you've quoted, however, that depends on your right foot :rolleyes:

will chase that up tomorrow, thanks. also just pulled off the AFM's to clean them and they were very dirty, looks like they haven't been cleaned in a long time. back one had alot of oil on it from the oil breather line so im going to fit a catch can to that side and that should fix that problem.

found this web page http://members.pcug.org.au/~jdeakins/facts.html

got good info on it, looks like i can get them for about 125 each + shipping, part no 0za395-ec. will need to be modified to fit plugs but thats 50% cheaper than the originals.

these are suposed to be the same as the rb25 ones. can anyone confirm that.

will be ringing them back next week to get a price on the boch 0 258 005 726. these are the replacements for r33 and r34 GTR's

ordering two rb25 o2 sensors tomorrow. only one needs a plug change. part number NKT OZA 395-E2 from Kudos Motorsport. $168 for two delivered. These work on R33 and R34 GTR'S but not R32 GTR'S.

Thanks for your help guys

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Good to hear. Hopefully you're happy enough not to notice when driving and just enjoy yourself.
    • I mean, most of us just love cars. Doesnt necessarily have to be a skyline.
    • Did you pick up a manual cluster to remove the position indicator?  (Pretty sure the 34 has the gear position in the cluster, but it's been a while)
    • Here is a recipe. Sonic blocks till you get one that has a good enough bore. Get a torque plate and block brace, use your choice of fasteners (arp ect) bolt the thing together empty, half fill it and let it cure. Release it when it has, go to a REPUTABLE RB Builder and get the thing line bored/honed and cylinder honed to size, then wash. Once its all clean and dandy, wash and blow it out again. Then again.  Assemble said engine to your desired clearances with oil control mods, gasket to suit desired CR/Squish ect. Attach your extended sump with proper trap door oil baffles and head drain plumbed to sump with a SUMP BREATHER SYSTEM. Build your front diff with a decent LSD, rebuild your transfer case with a few extra plates, more than likely replace your tailshaft centre bearing and tighten up the rear diff. Tune to minimise excessive midrange cylinder pressure (timing unless you like to split bores and rebuild engines) Enjoy your engine, but hate the fact you are now destroying engine mounts, gearboxes, gearbox mounts, diff output flanges and driveshafts, diff mounts, tailshafts and front CV's.   Disclaimer.... Ive never done any of the aforementioned stuff.......
    • 440s will support well over 400HP on petrol, which is a decent place to be for an RB20. 230+rwkW. Will be a safer bet for idle/low load. 550s would be nice for the extra headroom. I've made the same decision with mine (Neo25). 1000s are probably too big for the Nistuned ECU, so I have some smaller ones.
×
×
  • Create New...