Jump to content
SAU Community

Recommended Posts

hey guys, got through the first tank on the new car and got about 250km outta 48ltrs. =about 18L/100. im guessing my o2's have never been replaced so im on the hunt for some. had a brows on the forum but the only place i can find them is at kudos motorsport which are originals for 480bux. anyone know where i can get them from cheaper?? if not them i think ill get the pfc tuned without the o2's working.

Link to comment
https://www.sau.com.au/forums/topic/349334-02-sensors-for-33-gtr/
Share on other sites

wiring is no problems. i know the tuning hadnt been done in a long time ten four but it probably needs new ones anyway. i have a look on the new for those o2' and see what i can come up with. i recon the car should be getting around the 14L/100 around town and 12 on the highway. the 18L/100 is on 10psi so its real bad but will get it sorted.

thanks guys

wiring is no problems. i know the tuning hadnt been done in a long time ten four but it probably needs new ones anyway. i have a look on the new for those o2' and see what i can come up with. i recon the car should be getting around the 14L/100 around town and 12 on the highway. the 18L/100 is on 10psi so its real bad but will get it sorted.

thanks guys

You should be able to get better than the figures you've quoted, however, that depends on your right foot :rolleyes:

will chase that up tomorrow, thanks. also just pulled off the AFM's to clean them and they were very dirty, looks like they haven't been cleaned in a long time. back one had alot of oil on it from the oil breather line so im going to fit a catch can to that side and that should fix that problem.

found this web page http://members.pcug.org.au/~jdeakins/facts.html

got good info on it, looks like i can get them for about 125 each + shipping, part no 0za395-ec. will need to be modified to fit plugs but thats 50% cheaper than the originals.

these are suposed to be the same as the rb25 ones. can anyone confirm that.

will be ringing them back next week to get a price on the boch 0 258 005 726. these are the replacements for r33 and r34 GTR's

ordering two rb25 o2 sensors tomorrow. only one needs a plug change. part number NKT OZA 395-E2 from Kudos Motorsport. $168 for two delivered. These work on R33 and R34 GTR'S but not R32 GTR'S.

Thanks for your help guys

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Didnt realise RB's had more then 1 head.
    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
×
×
  • Create New...