Jump to content
SAU Community

Recommended Posts

Hi there, I have a question for those people using the emanage ultimate in there vehicles. What power are u making and what mods have u done to the car. I am curious because not many people seem to wanna tune them. I have got an atr43g3 turbo with 600 cc injectors and would like to see what maps and mods people have done to there cars etc. I would like to get a map off another car that is similar to mine if possible thank u all

Link to comment
https://www.sau.com.au/forums/topic/349601-emanage-ultimate/
Share on other sites

They are good for what you're paying for but wouldn't you want the stability of a stand alone ecu if you're going to push the car above 250kw? And as you said it's not worth using one as you are limited with tuners.

Just a tip if you decide to keep it, don't bother with a map sensor. Keep using an AFM as the map sensor tables (to eliminate the AFM) are a bitch to get right.

Im hopefully going to get about 280 thats my plan I already have the unit and in the car. I have asked around a few tuners and 2 said they are a piece of shit but didnt know anything about them. One of them didnt even know that u DONT use a hand controller on them as they use a computer based software after that he said he would give it a go. The other 2 i contacted said they are a great piece of gear..........All i can gather is people just dont know how to use them Im really hoping that some one has my type of mods and i can get a rough map off them as its a bit of a pig to drive ( it currently has a remapped ecu for stock turbo fmic fp f/f exhaust ) so turbo very very laggy due to timing being retarded before boost comes on

I have one, only because there are no other ecu options like nistune. A good tuner can extract big power but it can drift a bit due to the stock ecu's mapping which is not a good idea at that level, and is one of the reasons I went e85 for safety. I have managed 300awkw so far.

Shame you aren't down in Melbourne, there are two tuners within a few k's of me willing to set them up, Trent (Status) and Cihan (Etuner), both very competent.

HI there I am aware of Trent as i have read his thread from what i can see he does a very good job I installed the emu and have figured how to change the afm and injector sizes and increase the lag time so it idles good. Its a bit hard up brissie way where some tuners will give it a go but not actually know how they work ( Oh please oh please does someone have the same mods as me lol )

I am forced (unhappily, but noone in the country can find an alternative..) to use one.. and my car setup will/is _SIMILAR_ to yours, but my car runs so poorly you surely don't want a map of this.

I was wondering if the piggyback is the reason it (mine) is so laggy, that or a really half-assed tune. :P

I am forced (unhappily, but noone in the country can find an alternative..) to use one.. and my car setup will/is _SIMILAR_ to yours, but my car runs so poorly you surely don't want a map of this.

I was wondering if the piggyback is the reason it (mine) is so laggy, that or a really half-assed tune. :P

Must be the tune, the Ultimate is very capable in the right hands. Perhaps tuning the low end yourself is an option?

get a wideband, connect it. learn to use auto tune.

if you get familiar with the data logger you can get on the PPo2 website (http://ppo2performance.com/docs/?cat=4) and get the baseline software which takes your data logs and helps you fine tune your fuel map. its a very smart piece of kit for the emanage. i was one of the testers in its early stages and this guy has spent a LOAD of time and effort getting it right. keep in mind its still in its beta stage.

  • 3 weeks later...

I have one, only because there are no other ecu options like nistune. A good tuner can extract big power but it can drift a bit due to the stock ecu's mapping which is not a good idea at that level, and is one of the reasons I went e85 for safety. I have managed 300awkw so far.

Shame you aren't down in Melbourne, there are two tuners within a few k's of me willing to set them up, Trent (Status) and Cihan (Etuner), both very competent.

What do you mean 'drift'? Is this because it only adjusts the stocks ECU's fueling and timing rather than having 'fixed' maps? The stock ECU is still free to do what it wants?!mellow.gif

It will be better than stock, but it won't be good enough. Save the money on buying it and get a nistune and get that installed and tuned. The different will be quite large, it will also be far easier to tune and you will have a larger base of tuners to choose from.

What do you mean 'drift'? Is this because it only adjusts the stocks ECU's fueling and timing rather than having 'fixed' maps? The stock ECU is still free to do what it wants?!mellow.gif

Yeah but the stock ecu doesn't use many correction maps or on the fly tune adjustments so you can get away with piggy backs most of the time, still better to go full aftermarket/nistune though.

Edited by Rolls

I had one on my r33 gtst and it was great. For the price at that point in time I couldnt argue and the results were definately worth it. Now with the GTR I will either go NISTUNE or PFC.

It will be better than stock, but it won't be good enough. Save the money on buying it and get a nistune and get that installed and tuned. The different will be quite large, it will also be far easier to tune and you will have a larger base of tuners to choose from.

Yeah but the stock ecu doesn't use many correction maps or on the fly tune adjustments so you can get away with piggy backs most of the time, still better to go full aftermarket/nistune though.

Nistune is just 16x16 maps and no provision for individual cylinder trims though? Slow as well only 8 bits.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...