Jump to content
SAU Community

Recommended Posts

hey,

Im looking to replace my bumper, as it has some damage to the driver side on it and was thinking i might just sell the gtr pods on it and replace the whole thing, but the only problem is i am having problem find anything remontly nice :P

i would like something to match my car nismo front bar and 400r side does anyone have any idea of a good 1?

Ok now onto the crazy ideas :D

1. r34 headlights onto a r33 is it possable and wat are peoples comments of how they would think they would look (tring to do a photochop but dont have any pics of r34 headlights) the reason this has come around is i need 2 replace of my headlights (damage) so i was thinkng i might do something different

2. My dad had this crazy idea and i was wondering if it would work, he said i wonder if u can hook the aircon up so it blows into the turbo, so some how connect the aircon to the intake pipe (where air filter is or make 2 pipes so still have air filter) and when turning on the aircon have coldair pump into it.

This idea has 1 major problem i think is that when the aircon is on the car seems to run alittle less quick and maybe the gain will just be as if it was running withou the aircon

any input would be helpful of all subjects :)

thanks Mike :headspin:

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

thanks for the photo prae :)

hmmm looking at the photo i am still not sure if it will work so good or even look so good confused :P

dan, i have no idea how the aircon works but i wonder if u could make a little aircon unit that has its own power supply and doesnt run off the engine and use that, my dad knows about those things so i will get him onto it when he gets back from work 2day.

Crazy ideas look wat happens when i dont go 2 school ahahaha :D

i had an idea back in the day when i was still wanting a v8 (hehehe how things have change) and i was thinking if adding a some vucum onto the intake pipes so that air is suck in faster therefore more air,

dont know if that would work again just another crazy idea

yeah dan_the_man is right, your turbo sucks a lot of air through the airfilters, an air conditioning unit wont even have close to enoguh power to make a differnce, i had the same idea when i was supercharging my bmw, also im not sure about this but the air that is coming out of the A/C unit isnt oxygen enriched like air from the atmostphere, which means even though its cold your engine be able to burn it as good as normal air, correct me if im wront.

If you use R34 lights you'll probably need to use R34 bonnett to match them ....then you'll probably need front bar to suit R34. I've just gone that route putting R33series 2 lights on my series 1. Series 1 bonnet and front bar no longer lined up properly

ok r34 lights r the go ahead :(

but only problem is i need a kit maybe someone could help me out, maybe rezz can come in and help me out

just get a bodykit instead of the stock R34 one if its better (eg: do luck, nimso etc)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
    • Assuming your brake pads are not worn right down, I'd add a little brake fluid. Is there any sign of a brake fluid leak?
    • Hello all,  I need of some help. On my drive home my handbrake light lit up and started flashing. When I got home I checked my handbrake sensor under the centre console and nothing seemed out of the ordinary. I have scanned my car via the consult port, no codes shown. Checked my brake fluid as well which is half full. Tried unplugging the brake master but it didn't change anything. Thoughts on what it could be? The master float doesn't seem to be stuck. My car is an 1998 ER34 sedan GT. No hicas but has ABS Photos below 👇🏾 
×
×
  • Create New...