Jump to content
SAU Community

Anyone Know What This Is?

hewe

By hewe,
in General Automotive Discussion

 Share

Recommended Posts

(OO)SKYLINE(OO) Grand Master

(OO)SKYLINE(OO)

Posted
Posted

Lets see it is wired into the loom for the ATTESSA computer.

So how about we take a stab in the dark & suggest it controls the torque split for the car.

Or the flux capacitance of the system if you you prefer that terminology.

agreed....my guess is HKS kansai torque split controller....the good one. But if so it should have a control unit up at your dash somewhere.

Sounds about right.

The ECU is not under the parcel shelf it is at the front passenger kick panel.

Plan-FAILURE Rising Star

Plan-FAILURE

Posted
Posted

In the boot of my r32 gtr there is this little box with Kansai service on it and a green button when pushed in it lights up.

I have only driven the car with it off, and only discovered it after i had spun a bearing. so i cant drive the car to see if it does anything.

I have googled it and it only comes up with kansai tuning shop.

Anybody know what it is or what it does?

Thanks!

That yellow circle in front of the black box looks uncannily like the idle control setter on the stock ecu - could be a sticker tho.

I think perhaps the switch has just been mounted on the metal box but is linked to something else as I have a similar metal box on my 32, in the same spot, but it doesn't have the black box with green switch...

  • 2 years later...
tosic33 Enthusiast

tosic33

Posted
Posted

Hi guys, old thread i know but there doesnt seem to be a definate answer in here, i also have a similar little black box with a green button in my r32 gtr but its just plain black with no writing on it, any ideas what its for?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • GTSBoy
      Cas issue

      By GTSBoy · Posted

      The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Duncan
      RB26DETT Sketchy boost mod?

      By Duncan · Posted

      Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • nash47
      Cas issue

      By nash47 · Posted

      Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • nxh
      R34 4 door side skirt identification

      By nxh · Posted

      Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...