Jump to content
SAU Community

Recommended Posts

Hi Guys,

can anyone recommend reliable car transport for my r35 to get to philip island?

I dont want some incompetent schmuck scratching every panel before it arrives.

If this is for the Nissan Drive days in March I know that the dealers are offering transport to PI so hopefully their regular carriers would know how to take enough care with your car.

If this is for the Nissan Drive days in March I know that the dealers are offering transport to PI so hopefully their regular carriers would know how to take enough care with your car.

Fungoolie, where did you hear that Nissan are offering transport? Not the case in SA.

Slip.

transport not offered in Qld either as Drew has mentioned.

I passed on the offer. Look at the schedule, long way to haul the car form here with very little track time.

If I am going to take the car down, it would be for a couple of weeks and several days at a few different tracks, not a few sessions in an afternoon at one.

Edited by handbrake

thanks for the comments.

yeah CEVA was actually one that I am waiting on a quote for.

However like mark said , it is a fair but of stuffing around for so little track time so i think i will pass on this too.

nissan should handle the transport so we can just relax and actually enjoy ourselves.

Fungoolie, where did you hear that Nissan are offering transport? Not the case in SA.

Slip.

Hi Slip,

Can't remember the guys name but when he came out to tell me if I'd won one of the spots he said that if I needed transport of the car he could arrange it through their own carrier. I was in front of Ziad when he said it. I ended up opting for Program 2 in the end.

Also have a look at the attachment.

Look 5 lines down in the overview. Bit ambiguous I know but implies that they will do it but at your cost. It's almost saying you HAVE to do it through them!

My thoughts went along the same lines as Handbrake in the end. It's not really a 2 day event, just from 4PM to 4PM and track time is minimal..... Plus on top of that you have to go through the whole rigmarole of pre and post track day inspections etc etc. If I'm going to drive PI I'd prefer to do a PIARC 2 day sprint event only costing $340 for the two days with heaps more track time and it's not during the working week.....

post-61477-0-15173300-1296791570_thumb.jpg

Edited by fungoolie
  • Like 1

I know the Nissan boys do read this forum so I will say that I think they have done the right thing by listening to their customers and trying to organise one of these track days at a place like PI but I would need more time on the circuit than the schedule offered to make me consider it worthwhile, especially coming from interstate.

Edited by handbrake

Hi Slip,

Can't remember the guys name but when he came out to tell me if I'd won one of the spots he said that if I needed transport of the car he could arrange it through their own carrier. I was in front of Ziad when he said it. I ended up opting for Program 2 in the end.

Also have a look at the attachment.

Look 5 lines down in the overview. Bit ambiguous I know but implies that they will do it but at your cost. It's almost saying you HAVE to do it through them!

My thoughts went along the same lines as Handbrake in the end. It's not really a 2 day event, just from 4PM to 4PM and track time is minimal..... Plus on top of that you have to go through the whole rigmarole of pre and post track day inspections etc etc. If I'm going to drive PI I'd prefer to do a PIARC 2 day sprint event only costing $340 for the two days with heaps more track time and it's not during the working week.....

Thanks Mate,

Hadn't seen that attachment. If you're around tomorrow come out to Martin's in the arvo to catch up and have a chat.

Cheers

Slip.

Why can't they organise one in Eastern Creek?

I know the Nissan boys do read this forum so I will say that I think they have done the right thing by listening to their customers and trying to organise one of these track days at a place like PI but I would need more time on the circuit than the schedule offered to make me consider it worthwhile, especially coming from interstate.

I would recommend CEVA.

They had a number of new Porsches at their Melbourne depot, they take photos of the car and note all damage in front of you when you drop it off.

yeah, unless you point the damage out to them - don't go CEVA

they don't take photos either

Thanks Mate,

Hadn't seen that attachment. If you're around tomorrow come out to Martin's in the arvo to catch up and have a chat.

Cheers

Slip.

Would've liked to come out to Martin's today but had to load in and set up for our gig at the Highlander tonight. I will make it soon though! I currently have next weekend off.

Cheers

David

Edited by fungoolie

yeah, unless you point the damage out to them - don't go CEVA

they don't take photos either

On the day, I watched them thoroughly look over and record two cars before our they did our car and transported it to Perth.

The car arrived in Perth very quickly and I will happily use CEVA again.

well having personally used ceva I would advise to ummmm look elsewhere. my own personal experience is they DID NOT take pictures of the car (I did though) when it was received at their depot, there were other issues too but suffice to say that I would be seeking an alternate arrangement to transport any car of mine in the future. I had previously had plenty of people recommend them but after what I witnessed and what occurred in my case I will not be going back there. The stories told to me by a staff member at the depot certainly didn't fill me with confidence either.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...