Jump to content
SAU Community

Recommended Posts

Guest RedLineGTR

From what i have seen of some dyno results the Series 2 for the 95 model gtst's are superior to the series 1 ecus because the 95 series ecus have a better air/fuel ratio pretty much a better factory tune. I'm not sure about the 96 series 2 ecus etc but in general year after year of production of these cars they usally fix little bugs and clean up fuel maps abit etc. Try and find one that is specific to your model, if you cant find a series 2 one try and go for whatever you can get if you need quick. My 2 Cents

From what i have seen of some dyno results the Series 2 for the 95 model gtst's are superior to the series 1 ecus because the 95 series ecus have a better air/fuel ratio pretty much a better factory tune. I'm not sure about the 96 series 2 ecus etc but in general year after year of production of these cars they usally fix little bugs and clean up fuel maps abit etc. Try and find one that is specific to your model, if you cant find a series 2 one try and go for whatever you can get if you need quick. My 2 Cents

i thought series II only start from 96 models up?

because i think i have a late 95 model, and i;ve only seen 96 models and above which start having extra air bag, different interior, kit and etc.

or is there actually a 95 series II ?

i thought series II only start from 96 models up?

because i think i have a late 95 model, and i;ve only seen 96 models and above which start having extra air bag, different interior, kit and etc.

or is there actually a 95 series II ?

The '95 model is often referred to as the series 1.5 because it looks like a series 1, but has many series 2 components, such as ECU, engine, AFM, etc. If yours is a late 95 model, it's definitely a series 1.5 and has the improved bits in it.

The '95 model is often referred to as the series 1.5 because it looks like a series 1, but has many series 2 components, such as ECU, engine, AFM, etc. If yours is a late 95 model, it's definitely a series 1.5 and has the improved bits in it.

ok, thought so too, but that still doesnt asnwer

if there is a 95 model series II?

The '95 model is often referred to as the series 1.5 because it looks like a series 1, but has many series 2 components, such as ECU, engine, AFM, etc. If yours is a late 95 model, it's definitely a series 1.5 and has the improved bits in it.

i think that answers your question perfectly. its a 1.5 so No there is no or highly unlikely that there is a 95 series 2.

I have an october 95 series 2... has the different squarer headlights, bonnet, grill, bumper, passenger + drivers airbag, update interior, colour coded skyline badge on the boot instead of the clear one that matches the indicators and so on. Mine has the mesh grill instead of the letter box grill, apparently an indicator of early series 2.

yep got a nov 95 series I but shit load of series II stuff like motor, exterior bits but no second airbag, talking bout airbags my light on the dash constantly has the airbag light on anyidea how to get rid of it and yes i don't have the stock steering wheel any more so no airbag

I have an october 95 series 2... has the different  squarer headlights, bonnet, grill, bumper,  passenger  + drivers airbag, update interior, colour coded skyline badge on the boot instead of the clear one that matches the indicators and so on. Mine has the mesh grill instead of the letter box grill, apparently an indicator of early series 2.

there we go :)

From memory when looking into my ECU ('95 Series 1.5) their are 7 different R33 GTS-t ECU models. The ECU I had was in the middle of that list (4th or 5th). I'd love to know what the difference is of each individual model.

Here is a pic of my Stock ECU: http://skylines.pnc.com.au/ecu.jpg

If your looking for ECU get your self a Power FC direct replacement ECU. Less hassles of wiring, uses original sensors and is tuneable up to 600hp, what I like about this ECU is the detonation warning light which is really handy for monitoring purposes. It's about $1600 brand new incl. GST with warranty and tech support if needed. I beleive the price is only for the ECU excludes hand controller.

The dates the jap use (for years) are based on eras. The last one, under emperor Hirohito was Showa, the current one is Heisei under emperor Akihito. The era began in 1989, so that year is Heisei 1, 1995 is therefore year 7

You can find the build date on your jap compliance plate, if you have the original books, you will be able to find the delivery date too.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...