Jump to content
SAU Community

Recommended Posts

I would like to know how to remove the carbon canister (with pics if possible). i have done a search, but found out its a legal requirement for these to be installed in Aus, which im guessing is the reason for lack of information on this topic. I Live in NZ and our laws are very relaxed compared to yours, so we arent required by law to have one.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/352834-removal-of-carbon-canister/
Share on other sites

Just rip it all out and make sure all the vacuum lines are plumbed back in.

Can't really go wrong with it.

Make sure you keep the line coming out of the petrol tank venting to atmosphere though.

There is quite a bit you get to remove:

post-35676-0-67289900-1296804638_thumb.jpg

Yeah pretty easy to remove i done mine along time ago, the concept of these shitty things is to remove the fumes from your fuel tank then returns them into the intake to be burnt up in the engine. Can't quite remember of the top of my head how many hoses go to it but the ones that go to the engine can be taken off and capped or plugged, the solid steel one that comes from the fuel tank can either be removed or shorten it and put a little breather filter on it. IF you don't cap the ones from the engine properly the engine will run like shit. But yeah they are just a useless waste of space.

Just rip it all out and make sure all the vacuum lines are plumbed back in.

Can't really go wrong with it.

Make sure you keep the line coming out of the petrol tank venting to atmosphere though.

There is quite a bit you get to remove:

post-35676-0-67289900-1296804638_thumb.jpg

looks like you have some hard lines in that pic? how far back did you remove the stuff?

the lines from the plenum look easy, it was the other 2 i have no idea about?

cheers

Im pretty sure they right back to the fuel tank, all i done with my mates R34 GTR was cut it shorter along the chassis rail and put a little filter on it as the fuel tank will still need to breathe unless you put another breather system on it other wise you will probably need a car hoist to remove it properly.

Sorry but what does a carbon canister do? just read that basically stop fuel vapour being released? never herd of one till reading ur post.

im in nz too

i think it was put there mainly for emissions. i dont believe there are gains for removing it, its just bloody ugly lol

yeah it was for emissions but yeah your right it is ugly as and it just more shit that gets in the way when your trying to do stuff to your engine and no matter how hard you try you will not make it look pretty lol

Im not 100% sure but there should only one hard line, the fuel tanks needs to breathe otherwise the tank will build up pressure on a hot day and that could be messy, the ones going to the intake were there so the fumes could go back into the engine and be disposed of by being burnt in the combustion chambers, so block them off otherwise the engine will not make vacuum and this could cause it to not run healthy or not run at all

Just to explain the hard lines in my picture. Even though there are four hard lines, it is essentially just the one that has been cut into pieces since that is the only way to remove it with everything still in the car.

From the bottom of the carbon canister is a rubber line that goes to a hard line. This hard lines runs behind the engine along the firewall towards the drivers side. It then meets another rubber line and then this goes into a hard line running underneath the car along side the chassis rail to the fuel tank.

So the majority of lines you see in my picture are what run underneath the car and along the firewall.

Like I said, you really can't mess it up. Think of it logically. You fuel tank needs to vent, hence the lines needs to be venting to atmosphere. Your engine can not vent, therefore any lines going to it need to be blocked off.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...