Jump to content
SAU Community

Recommended Posts

is it possible to swap in a stagea m35 center console that has the slide out tv screen in it into a model that doesnt have the screen

both centre consoles are indentical just have different things in them

is the screen just a basic gps and nothn else ???

??

Link to comment
https://www.sau.com.au/forums/topic/353578-m35-dash-with-tv-unit/
Share on other sites

Don't bother, go an aftermarket system if you have the dual din. The GPS wont work as it only has Japanese maps.

i have the single din with the torque, elec and boost gauges above that then the air con then a litle glove box above that

i have seen sme with exactly the same but just with the tv above that

i am after that as i want my screen to slide out like that its not hard to go after market computer unit and plug into that screen , so im just utilizing the screen with a dif input

so in a way i want the slide screen as is

Edited by Sidius

i want this one

still has the gauges and single din for a head deck ye has the screen , how can i get one of these and is there much effort to swapping them over

any help would be good then id just give away my one which is exactly the same but without screen

post-81183-0-04831000-1297381795_thumb.jpg

Edited by Sidius

hold on i thought double din was for the two story head decks and single was for the normal size head deck correct me please

are conversion kits available sum where

its all double din.

the gauges take up 1 din.

hold on i thought double din was for the two story head decks and single was for the normal size head deck correct me please

are conversion kits available sum where

its all double din.

the gauges take up 1 din.

any way

so any one know if they are easily changed

and also it would be simple to get a country base gps system and just plug the inputs into the screen , also to have a dvd input into the stock screens etc?

or does the screen also show car data like the gtrs??

Edited by Sidius

for the screen to work you also need the DVD rom(for GPS use only) thats sits in the compartment above the left Glove Box. GPS Doesnt work in Aus - TV doesnt work in Aus. mine stays off and I replace the DVD rom with an eManage :whistling:

you need the "module" in the rear left hatch of the boot.

and all the wiring that comes along with it.

all this for something that tells you your fuel economy in japanses(unless you do a language conversion) when you could just get a one din pop out screen and not have to modify circut boards n whatever else that needs to be done, to illeagily watch TV while your driving.

but if you wish to take this extreme pain in the ass of a route, the screens are all over IM.

Edited by AaronNM35

I think it wil be easier to by a different stagea than swap it. Like people have said you will need the dvd rom, screen and tv tuner in boot for aux input and wiring.

Im not sure if the sensors are all ready wired for the trip computer but they go in the back of dvd rom.

I know a guy in Adelaide that bought another V35 with a screen and sold his V35 without.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...