Jump to content
SAU Community

Recommended Posts

  • Replies 68
  • Created
  • Last Reply

Top Posters In This Topic

well I am a little bored, I pulled apart the spray gun I was going to use and gave it a good clean, ended up getting a good fan from it, but the spray is interrupted every 8-9 seconds though, maybe running too much pressure, today will see me service the hoist jack, can't wait :mellow:.

But there aint much to do until the body parts arrive i have been told that is tuesday.

Hi all,

can't find much on here about it, but I had a look at Enkei's fitment guide and they are saying a 19x10 +35 is best fit for an R34 GTR, I was looking to stuff a 20x10+35 in there, with a 275/30/R20.

Can anyone see a problem with this?

The rolling diameter of my stocks with 265/35R18's RE01's will be just over 3%, so no real matter philosophically there for me, I think the std ratios are a little short anyway. will have copy z-tune guards and lowered adjustable suspension and bushes to reduce cambers and help keep more tyre on the road.

these are the ones I am looking at;

post-78013-0-73072000-1298777007_thumb.jpg

post-78013-0-06984100-1298777057_thumb.jpg

post-78013-0-09396800-1298777077_thumb.jpg

20x10+35 Should fit fine, hell even go a bit lower on the offset I'd say to get it a bit flusher, I'm sure people will agree with me.

First style you posted looks the best, have you looked at CR KAIs or something similar? not sure if they come in 20s but look nice XD9 and XT7 will look nice as well. Then there is the Volk path but $$$$ for GTR sizes TE37s, GT-Cs etc would look tops.

Oh and just FYI - I run 18x10 +15 on my r33 GTR (would have gone bigger but that was the largest they make) and r33 GTR guards are a tiny bit smaller then R34 GTR ones I think. Heres a quick pic of mine:

179412_491002053778_548178778_6221160_575190_n.jpg

-Leigh

certainly had the car for a while, must have been one of the first 34 R's in the country back in '02 :)

nice to see it's getting a freshen up :)

It was complied in Victoria too. But generally good to know it has been in Oz for all of that time, makes an estimation of the actual km's traveled a lot easier.

I saw an article of a White R34 GTR v's a GTS Monaro, that was way back when they first came out, always had a sneaky suspicion it was this one :thumbsup:

Would be interesting to know for sure.

Well here it is!

The first unexpected problem >_<

The sump where it joins up with the front diff is cracked.

Darren thinks it was a factory repair that created a weak spot, as the original Nissan silastic was still on the sump.

post-78013-0-04143300-1298941767_thumb.jpg

I did remember the Beer Baron had a 34 sump with a diff fitted, but from chatting with him on Friday, he has disappeared since.

So if anyone out there has a R34 sump with the original diff fitted, I am interested to buy!!

My diff is in good shape, but the cost of fitting and a sump is more than we can get the whole unit second hand. Currently waiting on three people to get back to me from around Australia and the world, so please anyone else, get in touch?

Would like to put this to bed within a week.

20x10+35 Should fit fine, hell even go a bit lower on the offset I'd say to get it a bit flusher, I'm sure people will agree with me.

First style you posted looks the best, have you looked at CR KAIs or something similar? not sure if they come in 20s but look nice XD9 and XT7 will look nice as well. Then there is the Volk path but $$ for GTR sizes TE37s, GT-Cs etc would look tops.

Oh and just FYI - I run 18x10 +15 on my r33 GTR (would have gone bigger but that was the largest they make) and r33 GTR guards are a tiny bit smaller then R34 GTR ones I think. Heres a quick pic of mine:

179412_491002053778_548178778_6221160_575190_n.jpg

-Leigh

Thanks Leigh,

Pretty hard to find the Volks in 20's.

Looks like the Enkei's might have to do!

I take it you will be sourcing a set of Xenons for it aswell, instead of the halogen headlights in it now??

Nice build!

Hi Granthem,

It does have Xennon lights currently, but they have been doctored in there, so I found out the other day, the fittings are dubious to say the least!

I guess it wouldn't hurt top put it out there to see if anyone has any Xennon loom clips to solder in from a wrecked vehicle.

UNfortunately the headlights are getting some plastic welding done to them currently. Can't really do too much with the body until they come back.

Definitely be looking for 18x10.5 or more if you want flush. The new TE37SL come in 18x11's. They would do perfectly I think..

Looking to drop the hammer on some of the Enkei GTC01's 20x11+18, they will weigh a tonne, but will put some R compounds on the stocks for track days. They will be dressed in Falken F452 275/30/R20's. the tyres in US are soooo cheap!!

Good price.

Whats wrong with the splitter too? The narrower splitter I believe is designed to work with the Rtune bonnet, which pulls cool air from under the car, past the back of the radiator and out the bonnet vents with the hot radiator exhaust air.

Good price.

Whats wrong with the splitter too? The narrower splitter I believe is designed to work with the Rtune bonnet, which pulls cool air from under the car, past the back of the radiator and out the bonnet vents with the hot radiator exhaust air.

That is interesting, I thought the point of the R-Tune bonnet was to pull more air through the FMIC and radiator, could be wrong though. The guards are internally vented to pull hot air from the engine, so that will help the bay stay cooler.

The splitter was too narrow for the bumper, this isn't related to the length, there is a user on here with a top secret splitter available, I have PM'd him, but failing that I will fix the one I have I guess.

post-78013-0-10699400-1299213303_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...