Jump to content
SAU Community

Recommended Posts

R32 GTS-t

Satin black

17 inch work s2r wheels +15 offset with 245s 9.5inch rims i think, (have polished dish)

HDI electronic boost controller with boost gauge (run at low boost 12, high 14)

R33 Turbo with 10psi actuator(hasn't been boosted yet)

Front mount intercooler

Brand new tein coilovers

Cusco front strut brace

Gtr fuel pump

Apexi exhaust

Gtech dump/front pipe

Pod filter in custom air box with Cold air intake

Option gauges - oil pressure oil temp and air/fuel ratio

GTR fuel pump

GTR seats

GTR front bumper

GTR rear pods

Type M side skirts

removable steering wheel kit with Isotta wheel

Not sure on clutch but is aftermarket has a purple clutch cover

Engine is strong, car has done 125000 km, oil changed every 5000km since i have owned it, all fluids changed, clutch coolant gearbox oil ect.

Rego till 31/5/10

Price: $9000 ono. selling because i want to get back on a motorbike, im keen on trades for bikes plus cash either way and maybe a cheep daily

Pics: car is pretty dirty in pics

2wr2c0n.jpg

51pjdk.jpg

r1c4yv.jpg

deb9y8.jpg

Price drop to $8500

will sell without rims (on stockies) for $7800

Will sell without steering rims/wheel/gauges for $7500

can negotiate a deal with/without parts

HKS Turbo Timer

Good Condition, Came Out Of My R33.

Price $50 o.n.o

DSC01082.jpg

HKS Blowoff-Valve

Used But Working Perfectly.

Price $ 50 o.n.o

DSC01072.jpg

R33 Rear Seats

Series 1.

Good Condition, No Rips Or Tears,

$100 o.n.o

DSC00579.jpg

R33 Door Trims

Series 1.

Good Condition, Few Small Marks But No Rips Or Tears.

$100 o.n.o

DSC00576.jpg

DSC00572.jpg

R33 Steering Wheel Surround

Few Marks.

$20 o.n.o

DSC01077.jpg

R33 Standard Washer Bottle

Good Condition,

$20

DSC01081.jpg

R33 Middle Air-Con Vents, Drivers Air-Con Vent, Hazard & Demister Switch, Clock,

All Good Condition And Working Perfectly,

$30 For All Of It. o.n.o

DSC01087.jpg

PM ONLY!

Will Post Interstate,

Located In Adelaide.

RB20 crossover pipe, with bov -$50

standard intake pipe, awesome cond.-$40

x6 coil packs, appear to be in good nic-$80

free- car gas tank, still in date for 2 years from memory, even have a few bits'n peices to go with it

take it to a scrap yard and get some cash moneys? do what ya want, just come get it.

pm or 0433073302

RB20 crossover pipe, with bov -$50

standard intake pipe, awesome cond.-$40

x6 coil packs, appear to be in good nic-$80

free- car gas tank, still in date for 2 years from memory, even have a few bits'n peices to go with it

take it to a scrap yard and get some cash moneys? do what ya want, just come get it.

pm or 0433073302

i will take the gas tank craig pm ya addy and a good time to catch up

cheers dean

GPUSI xenon HID kit - $50

priced to sell, epic white headlights, looks porn, spade terminals connects straight into existing loom

CLICK HERE FOR PICTURE

Also got a headunit here to go: http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...=STRK:MESELX:IT

and R33 2 door side mirrors(the housing and the mirror, the whole lot including the wiring sticking out to plug into your existing) - $30

hey guys i got an rb20 green label afm looking for $90 only selling it cause i bought it thinking mine was stuffed and turns out it was fine.

Ph: 0401261531

cheers, Nathan

Edited by SLEEPA31

**UPDATE**

Parts - bought for R32, but most will fit R33/34 also. Selling car, parts not needed

img9074.jpg

in the image you can see:

Timing Belt Kit (gates racing belt, idlers, seals - says for RB20/RB25) - $200 SOLD

Front Wheel Bearings (R32/33/34 incl GTR) - $150set $125set

Rear Wheel Bearings inlc. Hub (R32/33 incl GTR and S14/S15) - $250set $225set

OR - $325 for all 4 wheels.

Ancillary belt set (4rib®925mm, 4rib 870mm, 3 rib 835mm ) - $50set

SOLD

and not shown;

Thrust/Throw out bearing (clutch) - $50

img9060fi.jpg

Genuine Work Equip 3 Piece Lightweight Wheels $650 $600

Wheels only - no tyres.

PCD: 5x114.3

17x7 +35

17x8 +35

Dv6547tx laptop, 24months old, 2gb ram, 250gb hhd, 2ghz, windows vista professional. come with box and everything it came with at date of purchase. $500

turbosmart BOV, no adaptor, ATMO style. $80

30 row oil cooler core. $50

isc front adjustable strut bar. $50

r33 s2 stock turbo, with actuator and oil drain and elbow, slim to none shaft play. $250

RB bellmouth dump front pipe. good condition $80

rb20 stock injectors. $50

s13 front end, coilovers, sr20de hubs, brakes, calipers, xmember. $600

pick up preffered but can drop off if need be!

cheers

Drift Pod set up for RB26 all set to go including extension pipe, 90 degree bend and AFM adapter and mounting bracket. $50

Greddy Emanage Ultimate (unit and N4 Plug suit rb25 and 26.... auto and manual) pm for price/ instalation

2x jap drifint dvds, one never opened.... no time to watch em...$20 each (sold pending final payment)

1x bolt in exhaust silencers,4.5" $20

6x HPI etc magazines. i think about 3 or 4 contain stageas in them $30

2x JBL 2ways 3 1/4 inch 25 rms 75 watt $20 (brand new)

1x 8gb ipod nano 3rd gen colour screen used but great condition. $75

top gear DVDs FULL set of volume one and 2 from bali actualy very good qaulitiy and one braught from BBC... $10 each

1x GFB boost t $30 no idea what pressures its good for but great for cheap each boost

2X 10mm slip on spacers... multi stud $20

1x rough silver zippo lighter $30

1x red M35 stagea solid model in case braught from another member not long ago $60

1x 8 tonne rated tow rope... used to rip a few trees out but thats it. never put under serious strain... no rips or fraying $70 (hard to post coz of weight)

1x nokia hands free kit very good condition used in box $60

1x Rjays full face helmet (aus standards but not for motorcycle) never been crashed on fre scratches $60

1x fox goggles. clear leans, not scratched up. $20

1x dicksmith webcam $10

1x dicksmith computer mic with stand very n ew $15

1x logitech ATTACK 3 joystick (very new) $40

heaps of ramsay dvds again all in great nick. will double check. F-word series 1 2 and 3 for $50 all 4 nighmares dvds $50

series 1 DEADLIEST CATCH 3 cd (350 mins or so) $25

Am looking to get a Greddy profec b spec 2 and FMIC suit rb25 if swaping shits your thing... will obviously be seeing it b4 hand tho!

Pm me or txt 0400099986

selling 1 of my desktop computers

all parts bar power supply and box wer replaced 6 months ago

specs are

Windows Xp Professional SP3

Intel Celron CPU

e1400 @2.00Ghz

2.02Ghz with 1Gb ddr3 800 ram

150gb harddrive

LG CD/DVD rom

onboard everthing

including 8usb

sound front and rear

Lan etc etc etc

Comes with View Master 15' i think screen

microsoft keyboard

mouse and pad

Billion Wirless G modem/router biPac 7300g

with phone line, Ethernet cord power cord wireless antener.

very quick little machine looks plain ans simple has been running great since rebild

ill clean all my random stuff off b4 handover ofcourse

(has avast and spybot installed also)

pick up from Burnside or nth Adelaide

$300

Dv6547tx laptop, 24months old, 2gb ram, 250gb hhd, 2ghz, windows vista professional. come with box and everything it came with at date of purchase. $500

turbosmart BOV, no adaptor, ATMO style. $80

30 row oil cooler core. $50 SOLD

isc front adjustable strut bar. $50

r33 s2 stock turbo, with actuator and oil drain and elbow, slim to none shaft play. $250 SOLD

RB bellmouth dump front pipe. good condition $80

rb20 stock injectors. $50 SOLD

s13 front end, coilovers, sr20de hubs, brakes, calipers, xmember. $600

pick up preffered but can drop off if need be!

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...