Jump to content
SAU Community

Recommended Posts

R32 GTR Trust Jasma Exhuast 3" Cat back, also have larger front pipes(inc cat) to go with sale(not sure if trust front pipe though)

Cat back is all heat wrapped

Reasonable cond, has had some ressy swaps in its life, but passed with 89db at regency on mine.

$250, northern suburbs

sms or pm

0413 247 219

700cc SARD injectors to suit RB26

Excellent condition, only 3500kms of use.

Injectors will be available after March 6th.

With Bosch 044 and Sard Regulator these have supported 430rwkws at Factory base fuel pressure / pump fuel.

$550 - Western Suburbs

Fitting available for a little extra.....

PM me

I have a full set of S14 seats if anyone wants them? Upgrade your shitty S13 or R32 seats! Comes with rails and seatbelts if you want them as well

$250, take front and rear off my hands!

HSD HR Coilovers - $1200.

AMPerformance Full Stainless Steel Exhaust - Split Dump, straight though with HFC & Blastpipes - $1100.

Full R34 Nistuned ECU - $500+Standard Ecu.

Velo Podium 2 Fixed Bucket Seat With Mounting Bracket - $1000.

Bronze Work Xd9's 18x9+30 18x10+18 - With current tires and a spare - $2200.

Factory Option R34 Fourdoor Monsoon Shilds - $300

KKR Pineapple Bushes - $60

12" Soundsteam Taranchula Subwoofer inbox - $300

Contact via PM or 0432 581 798

700cc SARD injectors to suit RB26

Excellent condition, only 3500kms of use.

Injectors will be available after March 6th.

With Bosch 044 and Sard Regulator these have supported 430rwkws at Factory base fuel pressure / pump fuel.

$550 - Western Suburbs

Fitting available for a little extra.....

PM me

Just tried to Pm you but it didnt work, was going to ask you if the above your selling, would they fit in a rb25, thanks.

1) Item: R34 GTR Spoiler (Genuine)

Item Condition:

Good condition, Pearl White in colour, missing the adjustable part of the spoiler. (Can get carbonfibre copys of it)

Contact Details:

PM me

Price and price conditions:

Looking at 550 negotiable

2) Item: R34 4 door factory nissan side skirt LH

Item condition:

Good condition couple scratches and one crack where it goes into the wheel bay/arch area (apparently very common)

Navy blue metallic in colour

Contact me via PM

Price: $200

Located in WINGFIELD

post-70366-0-48138700-1298532165_thumb.jpg

post-70366-0-48479700-1298532580_thumb.jpg

1) Item: Cannon IP4300 duplex printer

Item Condition: Good condition, 1 of the black ink cartridges needs replacing pronto

Contact Details: PM me or ring me 0421932750

Price: $60 firm

http://www.canon.com.au/ftp/pixma%20ip4300%20techsheet.pdf

2) Item: Diamondview Flatbed Scanner

Item condition: Good condition

Contact Details: PM me or ring me 0421932750

Price: $25 fairly firm might come down if you buy either or both other items

3) Item: Pro Color Compatible ink cartridge 2x Black large and small cyan magenta and yellow and the chip reseter

Suits: PIXMA iP3600/ iP4600/ ip4700

MP540/ MP550/ MP560/ MP620

MP630/ MP640/ MP980/ MP990

MX860/ MX870

Item condition: Brand New

Contact Details: PM me or ring me 0421932750

Price: $45

post-13315-0-23192100-1298534643_thumb.jpg

post-13315-0-83984600-1298534649_thumb.jpg

post-13315-0-61058200-1298534654_thumb.jpg

Just tried to Pm you but it didnt work, was going to ask you if the above your selling, would they fit in a rb25, thanks.

Factory RB25 are side feed and GTR are top feed injectors, need to convert to top feed rail and need resistor pack as well. It can be done but I'll default to RB25 guru's to confirm.

ADR Monza fiberglass recliner with 180sx/s13

Decent condition just a little faded.

$150 with rail!

seat.jpg

RS*R Front pipe suit 180sx/s13 with some 3" split dump pipe (think the dump pipe has a crack)and a dead o2 sensor still init.

$50 for it all

IMG_0212.jpg

IMG_0211.jpg

180sx old school bird bath wing painted in champagne. Paint and wing are in great condition and fit perfect.

$100

post-24-12820481276211_thumb.jpg

IMG_0179.jpg

PRICE DROP!!

HSD HR Coilovers - $900.

Full R34 Nistuned ECU - $500+Standard Ecu.

Velo Podium 2 Fixed Bucket Seat With Mounting Bracket - $1000.

Bronze Work Xd9's 18x9+30 18x10+18 - With current tires and a spare - $2000.

Factory Option R34 Fourdoor Monsoon Shilds - $300

KKR Pineapple Bushes - $60

12" Soundsteam Taranchula Subwoofer inbox - $300

Contact via PM or 0432 581 798

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...