Jump to content
SAU Community

Recommended Posts

Pair of Neuton NT5000 235/45/17 brand new tyres, have been fitted to rims and rolled around a workshop for about a month. Selling due to running a different tyre now on the drift car.

Just want what they owe me. $190 for the pair.

for sale-

r32 gtst cluster (tachno no worky)

has blue led globes

127oookms

$80

post-16535-0-35540300-1311558930_thumb.jpg

r32 stock caster arms

rubbers mint

$20

post-16535-0-89663900-1311558937_thumb.jpg

malpassi FPR

$50

post-16535-0-36058100-1311558895_thumb.jpg

rb25 stock injectors

both orings mint

$50

post-16535-0-11024300-1311558922_thumb.jpg

t3 manifold spacer for gt turbos

$15

post-16535-0-79856400-1311558944_thumb.jpg

rb25 crossover pipe with bov

$50

post-16535-0-16213100-1311558914_thumb.jpg

rb 3inch in and out decat

$50

post-16535-0-68341000-1311558876_thumb.jpg

rb20 inlet cam and gear

remove vct from rb25

$50

post-16535-0-56345700-1311558906_thumb.jpg

s14 fpr boot lip

$190

Pair of Neuton NT5000 235/45/17 brand new tyres, have been fitted to rims and rolled around a workshop for about a month. Selling due to running a different tyre now on the drift car.

Just want what they owe me. $190 for the pair.

sold pending pickup.

Also,

anyone wanting to mount their tv on the wall? i have 2 wall brackets here im not going to use, will suit anything from around a 40" upto a 55". One is a Sanus, black in colour, and the other is a Venturi, silver in colour, no boxes, but comes with a bag full of screws for each one.

$50 each.

All items 12 months old and used for 20,000 km

R34 GTR Nismo White 320km Dash 20,919km (In original box) $400

R34 GTR Power FC with hand controller (Tuned with Nismo airflowmeters, 800cc injectors, 98PULP, 16psi, 280kw) $600 Sold

Splitfire Coil Packs P/N DIS-005 (R34 GTR, R33 Series 2) $250 Deposit Taken

Blitz Dual-SBC Spec-R Boost controller Kit $300 Sold

Nismo Low opening thermostat P/N 21200-RS580 (RB engines) inoriginal box $40 Sold

Innovate LC-1 with XD-16 Digital wide band O2 sensor Kit(Has original box with spare faces, instructions, exhaust bung, etc) $120 Sold (Awaiting payment)

All items ready for pick up in Adelaide

All items can be posted at buyer expense

Photos available via email just PM me for them

Call me on 0401 469 148

post-36793-0-36721600-1311564969_thumb.jpg

sold pending pickup.

Also,

anyone wanting to mount their tv on the wall? i have 2 wall brackets here im not going to use, will suit anything from around a 40" upto a 55". One is a Sanus, black in colour, and the other is a Venturi, silver in colour, no boxes, but comes with a bag full of screws for each one.

$50 each.

Just to add this, got a few more things i found.

Nintendo 64 console, comes with 2 controllers, Goldeneye, Mario Kart and Donkey Kong including all cables also. In good working order.

$100

Xbox Console, 1 controller and Forza Motorsport game including all cables in good working order

$100

Linksys by Cisco Media Hub with 500Gb HDD, model number NMH400. Dont know too much about this but it is a unwanted prize, from what i can find on net, rrp of about $400, this is brand new in box, never used, still with plastic seal around box.

$300

Pioneer Analogue DVD recorder. Probably good for dubbing video camera stuff to hard drive and dvd etc. 160Gb HDD.

$100

15 metre Monster HDMI cable, rrp $499. Brand new unused.

$250

2 metre Monster high speed HDMI cable, rrp $249. Brand new unused.

$50

MYSTYLE Mp3 player, also has FM radio and voice recorder. 256mb. Brand new unused.

$50

Stack of about 30 Zoo magazines, some recent, some old.

$30

Pics available on request.

Cheers.

R33 stock air box and snorkel with near new apexi pannel filter $100

img0508uy.jpg

By joey_5004 at 2011-07-14

nissan 5 stud 15mm spacers with all studs $80SOLD

img0507hw.jpg

By joey_5004 at 2011-07-14

r33 stock coolah with all pipes $80

img0506j.jpg

By joey_5004 at 2011-07-14

r33 sers2 rear seat set in mint con $100

img0502th.jpg

By joey_5004 at 2011-07-14

r34 set of GT-T rims with out tyres $250

img0503lg.jpg

By joey_5004 at 2011-07-14

r33 stock front shocks and stock rear springs$80

img0505v.jpg

By joey_5004 at 2011-07-14

r33 rear shocks KYB buzz spec damper adjustable(broken studs on top hats)$60

img0504r.jpg

By joey_5004 at 2011-07-14

r33 aftermarket front bar, needs paint. has afew cracks and is missing the left hand side cover over the fog light $200

img0509bb.jpg

By joey_5004 at 2011-07-14

R33 seris2 front grill in silver.. has a clip or 2 missing and afew scratches $50

Pm or 0431528958 ..

BUMP !! everything needs to go .. all prices ONO

Edited by joeyy

Long story short, i purchased what i thought were 6 very very expensive dining room chairs. opened a box to find out i bought 12 chairs as there were 2 chairs per box. Only required 4 in the end due to space restrictions. I have 8 chairs for sale. I worked out i paid $80/chair, not $160. (which is cheap if you look in Nick Scali etc. retail for $160/chair)

Chairs are manufactured in Malaysia. They are all brand new in box wrapped in plastic. comes with an allen key in the bag with all the cap screws. The pictures make the fabric look pink. they are not pink, they are a tan(ish) material. neutral to match pretty much any dining room set up.

looking for $60 each($120/box) or $400 for all 8

any questions, PM me.

Located South of Adelaide. but can meet anywhere near the city.

2011-07-10173634.jpg

2011-07-10163703.jpg

2011-07-10163648.jpg

2011-07-10163620.jpg

Item: Fender Frontman 212r 100w Guitar Amp

Condition: In very good condition barely used and no signs of cosmetic wear

Pickup from mount Barker area, but may be able to meet in town or flinders.

Looking for $450 PM me if interested :)

Amp.jpg

R33 Genuine Hybrid FMIC (600x300x76) and Piping kit. Note that intercooler hot size pipe has a small gash/hole (about 1cm long by 2mm wide) and would require welding to fix prior to fitment, or you could clamp a silcone joiner over the gash. Price reflects this.

$250 - pickup from NE 'burbs.

Bump - $200.

Hey guys

Thinking of selling my drift wing lip to suit a R33.

Wing is in oh'ok condition,

Made from fibreglass.

This drift wing is of the highest quality and is a 100% snug fit on your R33.

Wing is already painted and would only be ideal for a black R33

2 chip's on the wing when being removed

will swap for GTR wing only with a brake light in it

or sell $300

Thanks

post-81807-0-58505000-1311413741_thumb.jpg

i have a pair of r33 gtst side skirts, they came off my skyline R33 series 1 they are black, and in near perfect condition..

$200

post-81807-0-39186800-1310384283_thumb.jpg

post-81807-0-15760000-1310384333_thumb.jpg

Thanks

Edited by MAD R33

FOR SALE:

BITSUS Customs OIL/AIR SEPERATOR

Looks like so:

http://www.facebook.com/media/set/?set=a.124255994253983.20680.123901314289451

to suit RB26/GTR's

Supplied as a full kit:

# Catch can

# All Hoses

# Clamps

# Mounting Brackets

# Replacement Oil Drain

# Breather hose Adapter

The design of this catch can allows for all collected oil to be drained back to the sump, allowing cleaner air to enter the intake system, providing more power to the engine.

The one I'm selling is powdercoated black with black clamps - it's been used and was fitted on my GTR but now I've taken it off ready to be sold.

Price: $200 fitted(bring your car round to mine) + I need your stock oil drain pipe(I'll give the modified one to suit the oil/air separator)

Buyer hasn't got back to me about it so it's back up for sale... first to front up the cash gets it - PM me.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...