Jump to content
SAU Community

Recommended Posts

Price drop to $8,500 ono + new pictures

Already bought the new car so no trades to be considered.

Location Adelaide North East Suburbs/Eastern City Fringe

Purchased from a fastidious owner 5 years ago with many sensible enhancements performed

- Rare Blitz 3 piece 17" rims with new tyres on rears

- Huge Blitz intercooler

- Mines ECU

- Pager alarm system

- Custom turbo back exhaust system with titanium tip (bolt-in silencer included)

- Stock turbo with bleed to run 14psi (autometer boost gauge in cabin)- Bomex front bar (repairable crack)

- KYB shocks with King Springs

- Custom red/black leatherette interior

- Isotta red leather steering wheel

- GTR clutch pedal assembly (to cope with installed Ogura Super Single Clutch)

- Dual core aluminium radiator

- Pioneer sound system incl head unit (ipod cable), speakers, 10" sub and 2 amps.

- Head gasket replaced 3 yrs ago with reco head. Mechanic informed at this stage that this was a very well maintained engine (evidenced by factory bore markings still being pristine 15yrs after manufacture)

- Gearbox replaced 4 yrs ago with reco box

- Slotted brake rotors recently serviced with QFM pads. Front calipers are sumitomo (?GTR upgrade)

- Custom dash conversion to red LED illumination

[email protected]

post-740-0-15359700-1311733252_thumb.jpg

post-740-0-79455900-1311733268_thumb.jpg

post-740-0-99344900-1311733278_thumb.jpg

post-740-0-73303400-1311733289_thumb.jpg

post-740-0-41580300-1311733307_thumb.jpg

post-740-0-34572400-1311733315_thumb.jpg

post-740-0-25176500-1311733328_thumb.jpg

post-740-0-58611400-1311733336_thumb.jpg

post-740-0-05272700-1311733348_thumb.jpg

post-740-0-32926500-1311733358_thumb.jpg

post-740-0-70435400-1311733387_thumb.jpg

FOR SALE:

Fujifilm S1600 Digital Camera

-15x Optical Zoom

-28mm Wide Angle Lens

-12MP - Output of 3000 x 4000

-Can take HD video, up to 1280 x 720

Price: $150

PM me for pictures or more info

Price Drop: $100

VT Commodore Wagon ~ White in colour

Stock -

Good condition exterior.

Great condition interior (no rips etc)

4 x new tyres all round

Tow bar (great for towing)

Good fuel economy

- 500km p/tank city driving

- 700+km highway driving

280,000 k's

Recent trans service

Radiator replaced 15,000k's ago

Replaced sump & rear main gaskets

Rego until October

Has service history for most of its life up until approx 200,000k's old

Well maintained vehicle.

Selling due to down sizing in cars.

$5,000 ono

Contact Wayne - 0433830055

Located Western Suburbs A D L

Text between business hours - Call after 5pm

post-53526-0-41583400-1311768537_thumb.jpg

post-53526-0-95918700-1311768558_thumb.jpg

So this gutted cat was sold to me as a decat.

Its not, and is worse than a stock cat in the way it will bounce the gasses around because its so wide inside.

Hes not willing to take it back over faulse advertising.

Any 1 want this or bin ?

Thanx

for sale-

r32 gtst cluster (tachno no worky)

has blue led globes

127oookms

$80

post-16535-0-35540300-1311558930_thumb.jpg

r32 stock caster arms

rubbers mint

$20

post-16535-0-89663900-1311558937_thumb.jpg

malpassi FPR

$50

post-16535-0-36058100-1311558895_thumb.jpg

rb25 stock injectors

both orings mint

$50

post-16535-0-11024300-1311558922_thumb.jpg

t3 manifold spacer for gt turbos

$15

post-16535-0-79856400-1311558944_thumb.jpg

rb25 crossover pipe with bov

$50

post-16535-0-16213100-1311558914_thumb.jpg

rb 3inch in and out decat

$50

post-16535-0-68341000-1311558876_thumb.jpg

rb20 inlet cam and gear

remove vct from rb25

$50

post-16535-0-56345700-1311558906_thumb.jpg

s14 fpr boot lip

$190

So this gutted cat was sold to me as a decat.

Its not, and is worse than a stock cat in the way it will bounce the gasses around because its so wide inside.

Hes not willing to take it back over faulse advertising.

Any 1 want this or bin ?

Poor form.

did you buy the item chris? no, so STFU?

and he had a picture which clear shows the item he was getting, also why did he accept it on delivery?

sorry mate but i sold it in good faith.

he had the opportunity to say no twice, once with the picture and once when i dropped it off..

Edit: and if i recall this isnt the first time hes wanted his money back after buying something.

Got a r32 4 door exhaust full cat back system that's all original Nissan. Perfect condition will swap for a standard 32 wheel have a after market steering wheel aswell will swap both for the standard wheel. Or will sell wheel for 30 bucks with boss kit and exhaust system for 30 bucks as well. Pm or call or SMS 0433370776 for quicker response.

Cheers

Matt

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...