Jump to content
SAU Community

Recommended Posts

Hi all F/S...

I have 2x continental 205/55/R16's

Have reasonable tread, around 50%??

Tyres wouldn't fit on mates car.

Contact Details:

You can contact me on 0421186732 or email me @ [email protected]

Price and price conditions:

$60 firm as this is what i've paid for them. Pickup only.

Cheers

Luke

Selling a power steering pump, with resevoir, hoses etc to suit rb25, not sure about other rbs

i bought it from z imports thinking mine was stuffed, as it used to make noises when i tuned the wheel, turns out, they work much better when they have fluid in them!!! :rofl:

so now i dont need the new one, paid $120 sell $60.

pm me

***Sorry had posting issues***

Hey All

Have a R33 trial front bar which has bit of damage on bottom corner. White in colour.

$60

Also have 17" lenso S7's which are gold. multi 5 stud. unsure of offset.

slight gutter rash and corrosion on one of the centre caps.

comes with tyres but have ZERO tread.

$350

Will swap for R34 front bar or 18" deep dish rims. (something to fill the gaurds of my 34)

I will pay cash adjustment up to $300 for the right goods.

pics to come.

thanks to all

Items: SA 'S' series plates SLY026, 19/8 Apache wheels suit GTR offset

Condition: one plate has been trimmed to fit my car but otherwise brand new, wheels are like new, zero damage, done around 1000k's 90% rubber or better

Contact details: PM, 0439641901 a/h

Price: plates $300

wheels $1500 ono

post-47850-1209525144.jpg

Item:

Greddy type R coilovers, suit r33 gtst

Item Condition:

good condition, travelled 20k tops

Reason for selling:

gone for a softer option, getting too old!

Contact Details:

pm

Price and price conditions:

$800 firm, these retail over 2 g's now

post-34685-1209731551_thumb.jpg

Edited by 180or200

Item : PowerFogger universal Wet 4 & 6 Cylinder 10pound NOS kit including bottle, braided lines, all electrics, solonoids all that is needed!

Condition: New/Used = never filled or used but installed for show purposes

Payment : Cash as only wanting pickup

Price : $500 ono bought for over $700

Contact : On here through PM

Pics : If needed can provide on request but its a big blue bottle and some chrome solonids and braided lining

Cheers Simon

Item:

Greddy type R coilovers, suit r33 gtst

Item Condition:

good condition, travelled 20k tops

Reason for selling:

gone for a softer option, getting too old!

Contact Details:

pm

Price and price conditions:

$800 firm, these retail over 2 g's now

post-34685-1209731551_thumb.jpg

SOLD

G'day all

I have a few bits lying around that I may sell given the price is right.

R32 specific

Supermade bootlip spoiler. In white atm, but needs paint touching up. $300 (will get pics soon)

Vertex front bar. Reasonable condish apart from a few little bits that need bogging over. Matte black at present $80ish? (will get pics)

Universal

Bride race seat, I believe it's a BRIX. Average condish, few tears, padding loose. Still a solid seat, great for a budget slider. $250 no rail. (again, pics coming)

BBS mesh, 17 x 9 +20. Come with 60ish% Continentals, camber worn though. I believe 1 rim has had cracks repaired. $1500 - cheap for lightweight BBS'.

As seen on the white 4door :nyaanyaa: (cheers for the pic Dan :()

PICT0013.jpg

^^ I can't edit that for some reason?

Anyway heres an updated one with pics :)

R32 specific

Supermade bootlip spoiler. In white atm, but needs paint touching up. $300

Vertex front bar. Reasonable condish apart from a few little bits that need bogging over. Matte black at present $80ish?

4door Type M rear pods. Excellent condish, in white. Dunno how much these are worth - they somewhat rare? 100 bucks?

Universal

Bride race seat, I believe it's a BRIX. Average condish, few tears, padding loose. Still a solid seat, great for a budget slider. $250 no rail.

BBS mesh, 17 x 9 +20. Come with 60ish% Continentals, camber worn though. I believe 1 rim has had cracks repaired. $1500 - cheap for lightweight BBS'.

Boot spoiler

imae016bc3.jpg

Front bar

cuctkidl6.jpg

bits that need repairing (theres one on the other side too)

tujyfe9.jpg

Rear pods

image005wi9.jpg

Bride

image012ao4.jpg

Close up of rip

013xv4.jpg

This one shows rims and spoiler fitted

tsrijryijby1.jpg

Edited by AndrewJZX100

FOR SALE:

NISSAN SKYLINE R33 GTS-T S1 TYPE M

RB26DETT

ENGINE:

RB26DETT conversion

RB26 sump w/transfer case sliced off

RB25 engine mounts

RB25 Harmonic balancer

HKS Intercooler with custom front mount position and solid piping

BLITZ 80mm S/S tuned front pipes

SIGNAL S/S (1.1mm and 7kg!) rear 80mm straight through carbon muffler

HKS Pod filters

Splitfire coil packs

TODA Racing clutch

TODA Racing 4.5kg Flywheel

CUSCO 2 way mech diff

IRIDIUM Plugs - 6's

R33 GTR fuel pump

SUSPENSION / BRAKING AND HANDLING:

SELBY rear 28mm sway bar

RACING GEAR coilovers

D1 rear camber arms

D1 HICAS lock

CUSCO front tension rod

Solid rear subframe bushes

D1 adj castor rods

PROJECT MU Slotted front rotors

TRW (LUCAS) brake pads all round - new

NISMO Front strut brace with brake stopper

GTR rear strut brace

BODYWORK & INTERIOR

Full body respray in Blood Orange

Satin Black bonnet and wing

SPARCO bonnet pins

NARDI Steering wheel

TRUST gear knob

SPARCO Spirnt drivers seat w/ BRIDE Rail

GReddy Profec B Spec II boost control

GReddy Turbo Timer

GTR Centre gauges

New Carpet

GReddy Boost Gauge

OILS

Castrol Edge 5w30

Redline shock proof diff oil

Redline shock proof gearbox oil

Redline powersteering fluid

MOTUL 600R brake fluid

PLATES

SA Registered RB26 Number plates come with the sale of the car

3 months rego.

Im sure there is more to list but as you can see there has been shit loads spent.

Sadly i have just finished the car and am moving interstate so i need to sell. I have spent countless hours, blood and tears and SHIT loads on beers building this car! It owes me well over 35k and thats at a rough estimate! The car is can be driven as daily but it seriously set up for drift.

If you want a serious JDM Drift car for absolute peanuts that you can drive as hard as you want.. this is it!

Im asking a mere $20,500 and thats negotable. I need to sell soon but dont need any low ballers.

No dreamers need apply.

Contact me via PM or 0409901365 - Adam

post-43824-1209982716_thumb.jpg

post-43824-1209982819_thumb.jpg

post-43824-1209982918_thumb.jpg

Edited by RB26GTST

Items:

Engine Hoist and stand

Sparco Sprint fixed back race seat

Item Condition:

Engine hoist Used once!! Paid $299

Sparco seat BRAND NEW Paid $550

Extra Info:

Engine stand included

Contact Details:

PM or Ph. 0409901365

Price and price conditions:

Engine Hoist $150 Bucks come and pick it up

Sparco seat $200!! CHEAP

Photo of seat not actual seat - exactly the same except brand new in plastic!

post-43824-1210077021_thumb.jpg

post-43824-1210077035_thumb.jpg

Items:

Deatschwerks Injectors

550cc

Nissan RB25det R33 or Stagea

Item Condition:

Brand new in individual packaging

with rings etc

Extra Info:

best hi-flowed injectors in the world

have all latency information to set up after market ecu for these 550cc injectors

Price and price conditions:

PM Please, or 0427 803 556, southern adelaide or city pickup available

$480 firm

http://www.skylinesaustralia.com/forums/Rb...Bo-t217194.html

Items:

Engine Hoist and stand

Sparco Sprint fixed back race seat

Item Condition:

Engine hoist Used once!! Paid $299

Sparco seat BRAND NEW Paid $550 NOW SOLD!!!

Extra Info:

Engine stand included

Contact Details:

PM or Ph. 0409901365

Price and price conditions:

Engine Hoist $150 Bucks come and pick it up

Photo of seat not actual seat - exactly the same except brand new in plastic!

i have a pair for nizmo rear suspension im lookin for quick 150 as i think one of them is leaking but the other one is perfectly fine.

sorry about da pics taken with phone camera

they are for r33 gtst series 1

post-41719-1210214217_thumb.jpg

post-41719-1210214235_thumb.jpg

Edited by gtrkiet

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...