Jump to content
SAU Community

Recommended Posts

I woke up this morning thinking that I've never seen a car race where Power to Weight ratio is a class.

There's power band, engine size, NA, Turbo, Rear wheel, Front wheel classes etc... but I never seen a race where cars are put into classes where Power to Weight is the same or similar. It would open up the track to a much greater variety of cars.

Does it exist? If not, is there a reason?

I have no idea why I woke up with this in my head.

Link to comment
https://www.sau.com.au/forums/topic/355510-race-classes/
Share on other sites

Power to weight has very little to do with circuit work.

Think Bathurst.

2 Cars both have the same power to weight, 1 has 200hp 1 has 600hp, which do you think will get around to mountain faster?

Curious...what race class has limits on where in the RPM range you can make power? (power band)

Link to comment
https://www.sau.com.au/forums/topic/355510-race-classes/#findComment-5691469
Share on other sites

OK in that particular track, I would think Torque would come into play, fair call. (Forget that Power Band example.)

But say the track was flat? I would think it would be a close race wouldnt it? Actually when I think about it, I guess it would be a dis-advantage for the 200hp car on the straight. But say use the track at Wakefield. When I last went, the Hondas were eating up the bigger powered cars. I guess it depends on the track aye.

I guess why I was thinking of this was I was watching a Mini-Cup challenge on the weekend that I taped. All cars, identical, only thing that separates the winners and losers are the skill of the driver. But it got boring after a bit watching the same cars drive passed over and over. Would be nice to see a race where different types of cars compete together in a fair way.

I know the GT races are kinda like these but they're all Super Cars. Would like to see something more like the World Time Attack Challenege they had here last year.

Edited by Bourbon Boy
Link to comment
https://www.sau.com.au/forums/topic/355510-race-classes/#findComment-5691571
Share on other sites

What you are thinking of is IPRA (improved production) turbo cars need to run inlet air restrictors, there are minimum weights for different cars etc.

The only real bullets in a straight line are the 6L V8 Commodores, but then they are massivly under tyred so are slow through the corners and have to get on the brakes earlier etc

Link to comment
https://www.sau.com.au/forums/topic/355510-race-classes/#findComment-5691579
Share on other sites

Production sports cars used to run power/weight classes, ie you could choose whatever power and weight you wanted but you would be competing for points against other cars with the same power/weight.

The issue of course is weight is easy to measure and power is not. they used to take a dyno to some rounds and check some cars but it was just too hard to stay on top of. And too easy to fake lower power for a dyno run (eg boost controller or 2 maps on computer).

Tyres are really the best limiting factor IMHO. Keep everyone on the same, cheap, average tyres and lots of other things even out....

Link to comment
https://www.sau.com.au/forums/topic/355510-race-classes/#findComment-5692225
Share on other sites

control tyres are good - but also racing in a one make class is good cause then while some people have big budgets, others dont and is quite competitive.

Duncan you raced in the Daewoo series hey? so pretty much control everything! comes down to skill!

If I were to race in Prod Sports (which my car is built for) Im up against other 2F cars such as lotus's, rx7's, porka's etc which will suck balls.while in the mx5 class, its good as everyone has a different budget and is fun!

but I still come last. haha

Link to comment
https://www.sau.com.au/forums/topic/355510-race-classes/#findComment-5692258
Share on other sites

lol you beat a lotus chris, i remember it well :D

building a car to a class is a good idea (I did it :P) but it is not simple, easy or rewarding. It is limiting and frustrating. My GTR must be about the slowest one in the country!

But from when I first decided to build my own car, I knew I could not outspend the competition, so I went looking for tight rules where budget did not automatically determine who wins.

One make racing was excellent, but because it is close it is full of cheats. The Daewoo series was controlled one make so we couldn't even have the cars to fiddle with them - even so there was 10% power difference between the slowest and fastest of the 20 cars. 10% is a mile. The one time I got the quickest car (wakefield 500), Tom, Mark and I were leading by literally 1 lap when the power failed :(

So basically....there is no such thing as a level field, and no category where you don't need a reasonable budget to win.

Link to comment
https://www.sau.com.au/forums/topic/355510-race-classes/#findComment-5692442
Share on other sites

easy...supersprinting :D where are you based?

NICE! Thanks man. I never knew about this... I googled this: http://www.supersprints.com.au/

Is this what you're talking about?

What do you win? Is it just for glory?

Based in Sydney.

Link to comment
https://www.sau.com.au/forums/topic/355510-race-classes/#findComment-5694811
Share on other sites

supersprints are good fun and good entry level.

to give you a run down...

A skyline is to go into class SVD.

Its against the clock - but you are in a class.

you dont race for position on track as its not a race,well, more a race against clock and quickest lap wins.

in SVD class, you'll be up against GTR's, EVO's, highly modified commodores and falcons etc - most will be street registered. in fact I think they have to be street registered to be in SVD

My MX5 is 2B which is 1600-200cc and street rego'd with some modifications

There is the CAMS state supersprint series, and there is also the interclub one. I have done a a couple rounds of the CAMS one but 2009 I did the interclub one with southern sporting car club. 2011 I'll hopefulyl do 4 out of the 6 rounds.

Link to comment
https://www.sau.com.au/forums/topic/355510-race-classes/#findComment-5695102
Share on other sites

I was just reading this: http://www.supersprints.com.au/rules-and-regulations/2011/2011%20Vehicle%20Regs.pdf

There is no SVD? Just an SV and I dont think I'd be in that.

I'd probably be in Type 2 class with my 350GT with only an exhaust, braided brake lines & slotted roters as mods.

There is no entry fee information on the website but I assume that it will be in something like a normal club day out like $200-$300 depending on the track??

Whats minimum spend on entry\rego fees in a SuperSprint Championship series? (Excluding car mods\repairs that is...)

Link to comment
https://www.sau.com.au/forums/topic/355510-race-classes/#findComment-5695153
Share on other sites

nah your car is SVD. Not type 2.

there are different SV type classes but skylines fall under SVD unless you have an r32 or r35 aussie delivered.

the rules are weird.

entry is anywhere from 180 - 220 and you'll need to hire a timer beacon for 10-20 bucks

no rego fee's for them.

if you want more a relaxed series, the southern sporting car club has 4 at wakie and 2 at EC and isnt as full on as the CAMS state round.

google sscc

cheers!

Link to comment
https://www.sau.com.au/forums/topic/355510-race-classes/#findComment-5695195
Share on other sites

yep!!

some SVD racers do 1.40's at EC and 1.04's at wakie...

however, go there for the fun and try and beat your PB each time!!

if you are out there for fun (most people are!) who cares what lap times, you are out there enjoying your toy! just make realistic lap time goals and aim for them each time!

if you then get serious and bug has bitten, sell and then buy something that maybe comptetive in another class (like me haha)

Link to comment
https://www.sau.com.au/forums/topic/355510-race-classes/#findComment-5695490
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...