Jump to content
SAU Community

Rb26 Hunting

Sciclone

By Sciclone,
in Engines & Forced Induction

 Share

Recommended Posts

Sciclone Enthusiast

Sciclone

Posted
Posted

Hi All...

My GTR is hunting at idle. It happens after the car reaches ~82 degs. I'm guessing it's got something to do with the thermostat opening causing something to leak vacuum, but I'm not sure. It's really driving me bonkers. Has anyone had this problem, or have any idea what could be causing it.. I don't want to just start replacing random bits, but I don't know what it is.

Link to comment
https://www.sau.com.au/forums/topic/355602-rb26-hunting/
Share on other sites
djr81 Grand Master

djr81

Posted
Posted

Hi All...

My GTR is hunting at idle. It happens after the car reaches ~82 degs. I'm guessing it's got something to do with the thermostat opening causing something to leak vacuum, but I'm not sure. It's really driving me bonkers. Has anyone had this problem, or have any idea what could be causing it.. I don't want to just start replacing random bits, but I don't know what it is.

Why not adjust the valve that controls how much air the motor gets at idle?

It is under the plenum. Just screw it in & see if your problem goes away.

Link to comment
https://www.sau.com.au/forums/topic/355602-rb26-hunting/#findComment-5693052
Share on other sites
Sciclone Enthusiast

Sciclone

Posted
  • Author
Posted

DVS: its running a powerfc. Nothing has been changed on it recently and it's been doing it for a while. Thats why I thought vacuum or mechanical component. I've tried changing the 02 sensors, and resoldering the afms but to no avail.

DJR: adjusting the aac won't stop it hunting if there is a vacuum leak or what not.

Link to comment
https://www.sau.com.au/forums/topic/355602-rb26-hunting/#findComment-5695094
Share on other sites
DVS JEZ Grand Master

DVS JEZ

Posted
Posted

U need to do a thorough check for leaks, get a smoke test done, and make sure the car is hunting before u test it(82degrees)

Might even be something in the power fc when it reaches 82 degrees idle control or enrichment etc might need a tweak.

Link to comment
https://www.sau.com.au/forums/topic/355602-rb26-hunting/#findComment-5695147
Share on other sites
djr81 Grand Master

djr81

Posted
Posted

DVS: its running a powerfc. Nothing has been changed on it recently and it's been doing it for a while. Thats why I thought vacuum or mechanical component. I've tried changing the 02 sensors, and resoldering the afms but to no avail.

DJR: adjusting the aac won't stop it hunting if there is a vacuum leak or what not.

No, it wont. But given it takes 30 seconds to check & that it is probably the cause I reckon it is a good place to start.

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/355602-rb26-hunting/#findComment-5695257
Share on other sites
Sciclone Enthusiast

Sciclone

Posted
  • Author
Posted

It just seems weird that it wasn't doing it when I first had the PFC installed. I'm not happy with the tune anyway, but I'd like to have it not hunting when I go to get it tuned.

Would the pcv valve be a possible cause (heat causing the spring to go sloppy)? Otherwise, I might just get a length of vacuum tubing and redo all the vacuum hoses and see if that helps.

Link to comment
https://www.sau.com.au/forums/topic/355602-rb26-hunting/#findComment-5695325
Share on other sites
EAT26 Community Regular

EAT26

Posted
Posted

Hi All...

My GTR is hunting at idle. It happens after the car reaches ~82 degs. I'm guessing it's got something to do with the thermostat opening causing something to leak vacuum, but I'm not sure. It's really driving me bonkers. Has anyone had this problem, or have any idea what could be causing it.. I don't want to just start replacing random bits, but I don't know what it is.

Why not adjust the valve that controls how much air the motor gets at idle?

It is under the plenum. Just screw it in & see if your problem goes away.

This I feel is the answer to all your worries.

DVS: its running a powerfc. Nothing has been changed on it recently and it's been doing it for a while. Thats why I thought vacuum or mechanical component. I've tried changing the 02 sensors, and resoldering the afms but to no avail.

DJR: adjusting the aac won't stop it hunting if there is a vacuum leak or what not.

No, it wont. But given it takes 30 seconds to check & that it is probably the cause I reckon it is a good place to start.

+1

I had the same issue fixed by adjusting the idle control and also failing that cleaning AAC valve I got suggested by a member on here and it resolved my issue.

Link to comment
https://www.sau.com.au/forums/topic/355602-rb26-hunting/#findComment-5699338
Share on other sites
EAT26 Community Regular

EAT26

Posted
Posted

Thanks for your input Eat26.. I cleaned out the AAC recently (pulled it all apart and gave it a good scrubbing), but it was doing this before and after..

I will try adjusting like you and DJR suggested, and let you know how I go...

It could also be build up on the throttle bodies.

I got this spray stuff lol. cant remember off the top of my head spray it into the plenum, and some vac lines to clean it out.

http://www.skylinesaustralia.com/forums/topic/110431-diy-aac-valve-cleaning-idle-reset/

have you cleaned the AFM's as well?

Link to comment
https://www.sau.com.au/forums/topic/355602-rb26-hunting/#findComment-5700035
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      Hi everyone.

      By Marek · Posted

      Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...