Jump to content
SAU Community

Rb26 Hunting

Sciclone

By Sciclone,
in Engines & Forced Induction

 Share

Recommended Posts

Sciclone Enthusiast

Sciclone

Posted
Posted

Hi All...

My GTR is hunting at idle. It happens after the car reaches ~82 degs. I'm guessing it's got something to do with the thermostat opening causing something to leak vacuum, but I'm not sure. It's really driving me bonkers. Has anyone had this problem, or have any idea what could be causing it.. I don't want to just start replacing random bits, but I don't know what it is.

Link to comment
https://www.sau.com.au/forums/topic/355602-rb26-hunting/
Share on other sites
djr81 Grand Master

djr81

Posted
Posted

Hi All...

My GTR is hunting at idle. It happens after the car reaches ~82 degs. I'm guessing it's got something to do with the thermostat opening causing something to leak vacuum, but I'm not sure. It's really driving me bonkers. Has anyone had this problem, or have any idea what could be causing it.. I don't want to just start replacing random bits, but I don't know what it is.

Why not adjust the valve that controls how much air the motor gets at idle?

It is under the plenum. Just screw it in & see if your problem goes away.

Link to comment
https://www.sau.com.au/forums/topic/355602-rb26-hunting/#findComment-5693052
Share on other sites
Sciclone Enthusiast

Sciclone

Posted
  • Author
Posted

DVS: its running a powerfc. Nothing has been changed on it recently and it's been doing it for a while. Thats why I thought vacuum or mechanical component. I've tried changing the 02 sensors, and resoldering the afms but to no avail.

DJR: adjusting the aac won't stop it hunting if there is a vacuum leak or what not.

Link to comment
https://www.sau.com.au/forums/topic/355602-rb26-hunting/#findComment-5695094
Share on other sites
DVS JEZ Grand Master

DVS JEZ

Posted
Posted

U need to do a thorough check for leaks, get a smoke test done, and make sure the car is hunting before u test it(82degrees)

Might even be something in the power fc when it reaches 82 degrees idle control or enrichment etc might need a tweak.

Link to comment
https://www.sau.com.au/forums/topic/355602-rb26-hunting/#findComment-5695147
Share on other sites
djr81 Grand Master

djr81

Posted
Posted

DVS: its running a powerfc. Nothing has been changed on it recently and it's been doing it for a while. Thats why I thought vacuum or mechanical component. I've tried changing the 02 sensors, and resoldering the afms but to no avail.

DJR: adjusting the aac won't stop it hunting if there is a vacuum leak or what not.

No, it wont. But given it takes 30 seconds to check & that it is probably the cause I reckon it is a good place to start.

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/355602-rb26-hunting/#findComment-5695257
Share on other sites
Sciclone Enthusiast

Sciclone

Posted
  • Author
Posted

It just seems weird that it wasn't doing it when I first had the PFC installed. I'm not happy with the tune anyway, but I'd like to have it not hunting when I go to get it tuned.

Would the pcv valve be a possible cause (heat causing the spring to go sloppy)? Otherwise, I might just get a length of vacuum tubing and redo all the vacuum hoses and see if that helps.

Link to comment
https://www.sau.com.au/forums/topic/355602-rb26-hunting/#findComment-5695325
Share on other sites
EAT26 Community Regular

EAT26

Posted
Posted

Hi All...

My GTR is hunting at idle. It happens after the car reaches ~82 degs. I'm guessing it's got something to do with the thermostat opening causing something to leak vacuum, but I'm not sure. It's really driving me bonkers. Has anyone had this problem, or have any idea what could be causing it.. I don't want to just start replacing random bits, but I don't know what it is.

Why not adjust the valve that controls how much air the motor gets at idle?

It is under the plenum. Just screw it in & see if your problem goes away.

This I feel is the answer to all your worries.

DVS: its running a powerfc. Nothing has been changed on it recently and it's been doing it for a while. Thats why I thought vacuum or mechanical component. I've tried changing the 02 sensors, and resoldering the afms but to no avail.

DJR: adjusting the aac won't stop it hunting if there is a vacuum leak or what not.

No, it wont. But given it takes 30 seconds to check & that it is probably the cause I reckon it is a good place to start.

+1

I had the same issue fixed by adjusting the idle control and also failing that cleaning AAC valve I got suggested by a member on here and it resolved my issue.

Link to comment
https://www.sau.com.au/forums/topic/355602-rb26-hunting/#findComment-5699338
Share on other sites
EAT26 Community Regular

EAT26

Posted
Posted

Thanks for your input Eat26.. I cleaned out the AAC recently (pulled it all apart and gave it a good scrubbing), but it was doing this before and after..

I will try adjusting like you and DJR suggested, and let you know how I go...

It could also be build up on the throttle bodies.

I got this spray stuff lol. cant remember off the top of my head spray it into the plenum, and some vac lines to clean it out.

http://www.skylinesaustralia.com/forums/topic/110431-diy-aac-valve-cleaning-idle-reset/

have you cleaned the AFM's as well?

Link to comment
https://www.sau.com.au/forums/topic/355602-rb26-hunting/#findComment-5700035
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      ZF 6HP26 to RB30 block

      By GTSBoy · Posted

      Wow ELVIS. You have an....interesting approach to conversation. Did you not notice that I wasn't talking to you?
    • ELVIS
      ZF 6HP26 to RB30 block

      By ELVIS · Posted

      Hello Liam - HA - somewhere in flies - possibly I have an update, but I have been so busy, projects have taken a back seat to getting business back on track.  I will let you know the outcome, but I think I am going to go for the 8HP,  CHEERS.  ELVIS
    • ELVIS
      ZF 6HP26 to RB30 block

      By ELVIS · Posted

      Thanks Joshuaho96, yes - as someone else also suggested, the 8HP seems the 'smart choice' - HA - and ZERO to do with cost, but I am sure 8 speeds will be better than 6 speeds - HA - maybe.  I will purchase a new 8HP,  Thanks.  ELVIS.
    • ELVIS
      ZF 6HP26 to RB30 block

      By ELVIS · Posted

      Nobody said anything about getting a "...cheap Falcon box..."- it was JUST a question about a specific transmission.  And YOU may have a problem with not enough $ - HA - I do NOT - so please keep your comments like you are some financial guru to yourself.  BUT - much appreciated re the cost of a new 8HP and I twill probably be the way I go.  Thanks.  ELVIS.
    • joshuaho96
      ZF 6HP26 to RB30 block

      By joshuaho96 · Posted

      Most people I know in the BMW world are swapping 6HPs for 8HPs. The 6HP has a big issue with one of the clutch drum bushings wearing out shockingly early which leads to them going into limp mode going into 5th/6th gear as the oil pressure loss from the worn bushing causes clutch slip. Even with the adaptations in shifting the TCU can't bump line pressure enough to keep the clutches from slipping and burning. I've personally looked at a 335d with 6HP28 with one owner and ~90k miles on it and the transmission adaptations were way out of spec and even though it nominally drove ok I'm confident it would have needed a full rebuild sooner than later. Other than that they're fine, but the 8HP doesn't really have weird issues like this to my knowledge and they're in everything these days so pulling them out of crashed cars isn't too hard.
×
×
  • Create New...