Jump to content
SAU Community

Rb26 Hunting

Sciclone

By Sciclone,
in Engines & Forced Induction

 Share

Recommended Posts

Sciclone Enthusiast

Sciclone

Posted
Posted

Hi All...

My GTR is hunting at idle. It happens after the car reaches ~82 degs. I'm guessing it's got something to do with the thermostat opening causing something to leak vacuum, but I'm not sure. It's really driving me bonkers. Has anyone had this problem, or have any idea what could be causing it.. I don't want to just start replacing random bits, but I don't know what it is.

Link to comment
https://www.sau.com.au/forums/topic/355602-rb26-hunting/
Share on other sites
djr81 Grand Master

djr81

Posted
Posted

Hi All...

My GTR is hunting at idle. It happens after the car reaches ~82 degs. I'm guessing it's got something to do with the thermostat opening causing something to leak vacuum, but I'm not sure. It's really driving me bonkers. Has anyone had this problem, or have any idea what could be causing it.. I don't want to just start replacing random bits, but I don't know what it is.

Why not adjust the valve that controls how much air the motor gets at idle?

It is under the plenum. Just screw it in & see if your problem goes away.

Link to comment
https://www.sau.com.au/forums/topic/355602-rb26-hunting/#findComment-5693052
Share on other sites
Sciclone Enthusiast

Sciclone

Posted
  • Author
Posted

DVS: its running a powerfc. Nothing has been changed on it recently and it's been doing it for a while. Thats why I thought vacuum or mechanical component. I've tried changing the 02 sensors, and resoldering the afms but to no avail.

DJR: adjusting the aac won't stop it hunting if there is a vacuum leak or what not.

Link to comment
https://www.sau.com.au/forums/topic/355602-rb26-hunting/#findComment-5695094
Share on other sites
DVS JEZ Grand Master

DVS JEZ

Posted
Posted

U need to do a thorough check for leaks, get a smoke test done, and make sure the car is hunting before u test it(82degrees)

Might even be something in the power fc when it reaches 82 degrees idle control or enrichment etc might need a tweak.

Link to comment
https://www.sau.com.au/forums/topic/355602-rb26-hunting/#findComment-5695147
Share on other sites
djr81 Grand Master

djr81

Posted
Posted

DVS: its running a powerfc. Nothing has been changed on it recently and it's been doing it for a while. Thats why I thought vacuum or mechanical component. I've tried changing the 02 sensors, and resoldering the afms but to no avail.

DJR: adjusting the aac won't stop it hunting if there is a vacuum leak or what not.

No, it wont. But given it takes 30 seconds to check & that it is probably the cause I reckon it is a good place to start.

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/355602-rb26-hunting/#findComment-5695257
Share on other sites
Sciclone Enthusiast

Sciclone

Posted
  • Author
Posted

It just seems weird that it wasn't doing it when I first had the PFC installed. I'm not happy with the tune anyway, but I'd like to have it not hunting when I go to get it tuned.

Would the pcv valve be a possible cause (heat causing the spring to go sloppy)? Otherwise, I might just get a length of vacuum tubing and redo all the vacuum hoses and see if that helps.

Link to comment
https://www.sau.com.au/forums/topic/355602-rb26-hunting/#findComment-5695325
Share on other sites
EAT26 Community Regular

EAT26

Posted
Posted

Hi All...

My GTR is hunting at idle. It happens after the car reaches ~82 degs. I'm guessing it's got something to do with the thermostat opening causing something to leak vacuum, but I'm not sure. It's really driving me bonkers. Has anyone had this problem, or have any idea what could be causing it.. I don't want to just start replacing random bits, but I don't know what it is.

Why not adjust the valve that controls how much air the motor gets at idle?

It is under the plenum. Just screw it in & see if your problem goes away.

This I feel is the answer to all your worries.

DVS: its running a powerfc. Nothing has been changed on it recently and it's been doing it for a while. Thats why I thought vacuum or mechanical component. I've tried changing the 02 sensors, and resoldering the afms but to no avail.

DJR: adjusting the aac won't stop it hunting if there is a vacuum leak or what not.

No, it wont. But given it takes 30 seconds to check & that it is probably the cause I reckon it is a good place to start.

+1

I had the same issue fixed by adjusting the idle control and also failing that cleaning AAC valve I got suggested by a member on here and it resolved my issue.

Link to comment
https://www.sau.com.au/forums/topic/355602-rb26-hunting/#findComment-5699338
Share on other sites
EAT26 Community Regular

EAT26

Posted
Posted

Thanks for your input Eat26.. I cleaned out the AAC recently (pulled it all apart and gave it a good scrubbing), but it was doing this before and after..

I will try adjusting like you and DJR suggested, and let you know how I go...

It could also be build up on the throttle bodies.

I got this spray stuff lol. cant remember off the top of my head spray it into the plenum, and some vac lines to clean it out.

http://www.skylinesaustralia.com/forums/topic/110431-diy-aac-valve-cleaning-idle-reset/

have you cleaned the AFM's as well?

Link to comment
https://www.sau.com.au/forums/topic/355602-rb26-hunting/#findComment-5700035
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...