Jump to content
SAU Community

Recommended Posts

Just put a deposit down on a fairly mint 240K GL.

I've always had my eyes set on one.. and it was only when I gave up looking I came across one at the local shops.

Is there anything I should know about these cars? Anything to keep an eye on?

Rust and lack of spares.

In standard trim they're nothing special to drive (were great in their day, but that was compared to drum braked XA Falcons and HQ Holdens). They respond well to the usual go-fast mods (cams, carbs, exhaust, suspension) and with those mods might only be a few seconds slower than a Toyota Aurion.

Sarcasm aside, they are a cool classic, and becoming more sought after. As a daily drive, it will be "cool" but not the most quiet / comfortable / fast / safe / economical thing out there. If that matters not, and you want something with some character, then they are great. If you're after something that's more fun / better to drive than a later import skyline, then you might be disappointed.

Sounds like you're in love, so you'll no doubt be happy. They are generally pretty tough cars, so pretty hard to kill. Then agaqin, 40 years of abuse, neglect or poor maintenance can take its toll on anything, so who knows?

If you can find another one for cheap, get it.

Parts cars are definitely worth it.

I second this, you will need a parts car,

you didn't say if it was a coupe or a 4 door,

if it's a coupe, all the running gear, and the front end of a 4 door will fit. front window back is different.

Nigel

Thanks for the tips, and it's a sedan :) Wouldn't mind a coupe one day.

It's got some pretty average doors and front driver's fender.

Not damage, just rust.

Aside from that the dash has a crack in it, so need to source one of those.

Apart from those "minor" :D faults, it's mint interior, engine bay/boot is clean and chrome work is immaculate.

With donor cars, for parts like suspension does any of the other datsun's range work?

(ie. 200B)

Was thinking of looking into it, or are they miles apart?

200b to 240k compatability?

Well the IRS may have some similarities for starters.

The L20b 4 cyl im pretty sure shares the same timing components as the L24.

Suspension and brakes will depend on the year of the 200b, as im pretty sure the earlier ones had Japanese type calipers and mounting holes, then the later ones had Aus calipers (or ones readily available in Aus)

And yes, they are not the comfiest or most economical, but are getting rarer each year, and cool factor / retro status is increasing.

Power wise you have 30 plus years of modification options! Tripple carbs, dual carbs, big singles, EFI and turbo.

My choice would be to find a wrecked MR30 skyline (factroy efi, high compression, better fuel economy if tuned well)

and pull the engine & running gear from that, slot into the 240k.

Although thinking outside the box is something not done too often with the 240k, like a diesel conversion or rotary! (sr20det even....)

What would one of these fetch?

Chrome is immaculate, most panels rust free, minus front doors and front RH fender.

Dash has a crack, otherwise interior has been covered from new (Wool seat covers) and floors always had mats.

Doors trims are in perfect nick and doesn't leak.

L24 Motor, doesn't have problems with cold start, ignition barrel is slightly dicky (Sticks on "Start" at times).

Otherwise, minor diff noise but now I'm just being picky :)

Thinking if I try pass it on to a workmate who is keen and has room to do the car justice. Otherwise I might have to store it until I get a shed setup or a bigger house.

Its a buyers market really, only sells for what the buyer wants to pay.

$1500 would be considered a bargain, $5000 is not going to get sold in a hurry.

I missed out on one that I offered $1500 for, silly old lady sold it for $700 3 days before I had the money. It got chopped up and sent overseas for parts.

The four I have were,

about 10 years ago, $1000ish for a good 4 door (blue '73) - parts now (was daily drive)

about 7 years ago, $1200 for a good 4 door (white '77), - parts now (was daily drive)

about 4 years ago, $750ish for a good four door (white '75) - daily drive

about 2 years ago, $700 for a 2 door coupe (green '73) - my project car

Nigel

The four I have were,

about 10 years ago, $1000ish for a good 4 door (blue '73) - parts now (was daily drive)

about 7 years ago, $1200 for a good 4 door (white '77), - parts now (was daily drive)

about 4 years ago, $750ish for a good four door (white '75) - daily drive

about 2 years ago, $700 for a 2 door coupe (green '73) - my project car

Nigel

you wouldnt happen to have a spare front passenger side chrome eyebrow by any chance. Also whats the plan for your project, i see you have quite a collection.

cheers, Bob

you wouldnt happen to have a spare front passenger side chrome eyebrow by any chance. Also whats the plan for your project, i see you have quite a collection.

cheers, Bob

Sorry to say, I'm not selling any parts, as you know, parts are hard to come by,

My coupe is registered, and I am driving it,

http://noddle.110mb.com

Nigel

Sorry to say, I'm not selling any parts, as you know, parts are hard to come by,

My coupe is registered, and I am driving it,

http://noddle.110mb.com

Nigel

Fair enough mate, thats understandable. awsome car you have there BTW. Its good to see some 240ks being driven around rather than rusting in a paddock, although mines been on daily duty for about 4 weeks and its starting to give me the $hits.

locker, big cam etc. Great car mate, hold onto it.

Bob

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
    • Not sure yet.  Was considering speedtek because it was rated to 800hp, but when I did some research about him I don't think I will go for that🤣 So maybe giken gear set, but I'm afraid it won't be strong enough🙄
×
×
  • Create New...