Jump to content
SAU Community

Recommended Posts

Take the pad out, trace the shape on a piece of paper, then take it into the shop and compare your tracing to the diagrams in the listing.

(I wouldn't be surprised if it is the same as the others.)

apparently bendix dont make pads for a 33 gtr, or a 34 dont think, just a 32 non vpsec (non brembos I guess)

nissan factory pads are about $800 for the fronts and $1200ish for the rear, so I gotta find an alternative :)

cheapest ive been able to find so far is $200 for the front and $500 for the rears from a jap importer

they dont do the fronts....but the rears are the same as a BMW, or audi ...not sure which one....its some euro shitbox anyway...but dont buy them...i would suggest getting original ones or project U or something japanese....the other ones are crap

I found the bendix ultimates I had on the rex very dusty, they also tended to be squealy and non grippy when cold. I changed them with Lucas pads which seem to be quite good. They were cheaper than ultimates too, $120 a pair for fronts.

Can't help you out with part numbers though. It's not easy with anything later than r31 as many local stockists don't keep track of grey imports.

Edit - actually, R33 rear calipers are identicle to Subaru WRX MY01-MY04 rear calipers. That may help.

twinspot.jpg

r33ba.jpg

Cheers

Joey

Yeah I rang Bendix yesterdat after brake pads (ive got a 32 GTR non vspec but with R33 Brembo callipers on the front) and was told they dont make any pads for any sort of Brembo calliper... interesting.

Im looking at EBC Greenstuff at $200 for the front and $90 for the rear (keep in mind ive still got the stock R32 GTR rear callipers).

Try racebrakes, www.racebrakes.com.au and enquire about their RB74 pads, im going to call them today. A friend just fitted them in his GTiR and claims no matter how hard he pushes the car and rides the brakes, the hotter they get, the better they keep getting (and we went for a pretty hard drive through the mountains on the weekend).

Try racebrakes, www.racebrakes.com.au and enquire about their RB74 pads, im going to call them today. A friend just fitted them in his GTiR and claims no matter how hard he pushes the car and rides the brakes, the hotter they get, the better they keep getting (and we went for a pretty hard drive through the mountains on the weekend).
Yup I can vouch for this, the hotter they get the more they beg to be used, the guys at RaceBrakes are tops too :D Don't forget to mention that you are part of 'SAU' :)

Im with mist

Bendix are Ok for what they are - a budget performance pad... but nowhere near suitable enough for a GTR.

Look at alternatives such as Ferrodo, Endless or Green stuff.

Yes they cost more - but to many people are willing to spend mega dollas to make the car go fast - but tight wad on stopping quality.

Do your self a favour and give the bendix a miss.

Daniel

Its great if they keep getting better.. but what are the RB74s like when they're cold?

There is much discussion relating to these pads incl Bendix, RB74's, Green Stuff etc...will have to find the link but I am sure someone will beat me to it...(Looks for the any key...)

MADGT4 : Did u buy ur car from a dealer / importer? If u did, they probably fitted the cheapest (read:nastiest) pads they could find for compliancing, therefore the Bendix Ultimates will seem like a good upgrade. I went down that path too. Then I tried some real 'performance' brake pads (Endless for me) and the difference is night and day. Stopping is more important than going fast, no? :)

Its great if they keep getting better.. but what are the RB74s like when they're cold?

I don't mind them at all. They are "pretty good" when cold, and they only get better and better as they warm up. This is very subjective though, you might find they're as bad as the Ultimates. But with mine they seem to be perfectly fine by the time I get to the end of my street (braking for my driveway and the street corner).

Personally, I think the RB74's are the best bang for buck street pad out there, period. Yes the Ultimates are cheaper and if you don't take it to the track you may never get them to fade, but the amount of extra time you'll spend cleaning will quickly decrease their value.

Yes the RB74's get dusty, eventually, but so does any high performance pad. The difference is that the RB's get about the same amount of dust in 1000km as the Ultimates get in 100.

Personally, I think the RB74's are the best bang for buck street pad out there, period. Yes the Ultimates are cheaper and if you don't take it to the track you may never get them to fade, but the amount of extra time you'll spend cleaning will quickly decrease their value.

Couldn't have put it better myself. I've been using RB74's on DBA4000 Slotted Rotors for about 8mths now and highly recommend them.

Private and i dunno wot was on them at that time but yeah i will admit Bendix are awesome...

BUT like i said the dust is just really gettin to me...

I Clean my mags more than my car!

Was thinking about painting my mags black it is gettin that bad

  • 9 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
×
×
  • Create New...