Jump to content
SAU Community

Rb25 Head, Turbos, Injectors And More!

MBS206
 Share

Recommended Posts

MBS206 Grand Master

MBS206

Posted
Posted

Hey guys,

Well my RB25/30 days have come to an end, and as such, I have multiple items that need to be sold.

1:

RB25 Head.

This head has minor porting (Throat Job) and was rebuilt around 1500KM ago.

Include the cam covers that have been powder coated in Candy Red.

Oil Gallery has been welded for fitment to an RB30.

Asking Price: $750 ONO.

2.

ATR43G3 Turbo

Was only put on a car, and started up by previous owner. I've never run it.

Comes with stock exhaust mani and stainless dump pipe. Has the 14PSi actuator on it.

Asking Price: $850 ONO.

3.

SARD 880CC Side Feed Injectors.

These have the same amount of K's on them as the head (1500KM) and come with a freshly powder coated standard fuel rail (Candy Red) with standard FPR.

Asking Price: $750 ONO

4.

R33 GTS-t 5 Speed Manual Gearbox.

Car has 172 000KM on the clock (But most likely more), gears never whined or anything. Drives like a typical R33 GTS-t box. If I can find the short shifter, I'll throw this in too.

Asking Price: $1500 ONO

5. Generic Forward Facing Plenum.

I never ran this, bought it second hand, with throttle body and idle valve.

Asking $500 ONO, is a chrome polished finish.

6.

Plazmaman 100mm Core FMIC.

I've had this on my car since I bought it, and it's been great.

I don't know the height and width of it, but it fills the whole behind of my front grill.

Will throw all of the intercooler piping in I have for it too.

$400 ONO.

7. Chrome Moly 4.5KG Light weight fly wheel (And standard cluch plate, aftermarket pressure plate)

This clutch sat behind my RB30, ripped many a skid, did track days, and never had an issue.

This clutch and flywheel is currently in a friends car as a stop gap measure, and still running fine behind his motor too.

Clutch and flywheel will be available once his new one lands and he swaps it. No time before.

$550 ONO

8. Yellow Jacket Coils

Done approx 1500KM, work great, have external R33 Ignitor with them too.

$150 ONO

There will be more to come as I dig it out of the garage, and it gets ripped off the car as it's no longer required.

I'm contactable via PM on here, or via phone by calling 0406 962 347.

Most things are in Wollongong, except for the Gearbox and the Head. (There are a couple of bits and pieces still at Craved Coatings, yes, free plug, he does AMAZING WORK!)

I don't want to be arranging shipping, so would prefer pick up or drop off.

Link to comment
https://www.sau.com.au/forums/topic/356569-rb25-head-turbos-injectors-and-more/
Share on other sites
Cassbo Grand Master

Cassbo

Posted
Posted

7. Chrome Moly 4.5KG Light weight fly wheel (And standard cluch plate, aftermarket pressure plate)

This clutch sat behind my RB30, ripped many a skid, did track days, and never had an issue.

This clutch and flywheel is currently in a friends car as a stop gap measure, and still running fine behind his motor too.

Clutch and flywheel will be available once his new one lands and he swaps it. No time before.

$550 ONO

I'm the one with Matt's clutch/pressure plate/flywheel. As he says, works fine on my car (got be from Sydney to Winton, around Winton a couple of times and back to Sydney again without any dramas). I'd consider buying it if I hadn't already sunk around $1,200 into an OS Giken clutch :P

My clutch should arrive in the country next week, so it will probably be around 3-4 weeks before Matt's one is available. I might be able to get it done quicker if pressed ;)

MBS206 Grand Master

MBS206

Posted
  • Author
Posted

Jimmy, if performance wise say they do, I'd go with what they say.

Nik. You're welcome to make an offer, other wise, please STFU if you're just trolling.

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      Duncan's V37.......race car?

      By soviet_merlin · Posted

      Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • Murray_Calavera
      Jacks that fit under GTR lips that can reach the subframe?

      By Murray_Calavera · Posted

      My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Duncan
      Chris' Toyota Mark ii JZX110

      By Duncan · Posted

      Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • Duncan
      Jacks that fit under GTR lips that can reach the subframe?

      By Duncan · Posted

      BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
×
×
  • Create New...