Jump to content
SAU Community

Recommended Posts

Hey guys,

Well my RB25/30 days have come to an end, and as such, I have multiple items that need to be sold.

1:

RB25 Head.

This head has minor porting (Throat Job) and was rebuilt around 1500KM ago.

Include the cam covers that have been powder coated in Candy Red.

Oil Gallery has been welded for fitment to an RB30.

Asking Price: $750 ONO.

2.

ATR43G3 Turbo

Was only put on a car, and started up by previous owner. I've never run it.

Comes with stock exhaust mani and stainless dump pipe. Has the 14PSi actuator on it.

Asking Price: $850 ONO.

3.

SARD 880CC Side Feed Injectors.

These have the same amount of K's on them as the head (1500KM) and come with a freshly powder coated standard fuel rail (Candy Red) with standard FPR.

Asking Price: $750 ONO

4.

R33 GTS-t 5 Speed Manual Gearbox.

Car has 172 000KM on the clock (But most likely more), gears never whined or anything. Drives like a typical R33 GTS-t box. If I can find the short shifter, I'll throw this in too.

Asking Price: $1500 ONO

5. Generic Forward Facing Plenum.

I never ran this, bought it second hand, with throttle body and idle valve.

Asking $500 ONO, is a chrome polished finish.

6.

Plazmaman 100mm Core FMIC.

I've had this on my car since I bought it, and it's been great.

I don't know the height and width of it, but it fills the whole behind of my front grill.

Will throw all of the intercooler piping in I have for it too.

$400 ONO.

7. Chrome Moly 4.5KG Light weight fly wheel (And standard cluch plate, aftermarket pressure plate)

This clutch sat behind my RB30, ripped many a skid, did track days, and never had an issue.

This clutch and flywheel is currently in a friends car as a stop gap measure, and still running fine behind his motor too.

Clutch and flywheel will be available once his new one lands and he swaps it. No time before.

$550 ONO

8. Yellow Jacket Coils

Done approx 1500KM, work great, have external R33 Ignitor with them too.

$150 ONO

There will be more to come as I dig it out of the garage, and it gets ripped off the car as it's no longer required.

I'm contactable via PM on here, or via phone by calling 0406 962 347.

Most things are in Wollongong, except for the Gearbox and the Head. (There are a couple of bits and pieces still at Craved Coatings, yes, free plug, he does AMAZING WORK!)

I don't want to be arranging shipping, so would prefer pick up or drop off.

Link to comment
https://www.sau.com.au/forums/topic/356569-rb25-head-turbos-injectors-and-more/
Share on other sites

7. Chrome Moly 4.5KG Light weight fly wheel (And standard cluch plate, aftermarket pressure plate)

This clutch sat behind my RB30, ripped many a skid, did track days, and never had an issue.

This clutch and flywheel is currently in a friends car as a stop gap measure, and still running fine behind his motor too.

Clutch and flywheel will be available once his new one lands and he swaps it. No time before.

$550 ONO

I'm the one with Matt's clutch/pressure plate/flywheel. As he says, works fine on my car (got be from Sydney to Winton, around Winton a couple of times and back to Sydney again without any dramas). I'd consider buying it if I hadn't already sunk around $1,200 into an OS Giken clutch :P

My clutch should arrive in the country next week, so it will probably be around 3-4 weeks before Matt's one is available. I might be able to get it done quicker if pressed ;)

Jimmy, if performance wise say they do, I'd go with what they say.

Nik. You're welcome to make an offer, other wise, please STFU if you're just trolling.

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to it's full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so damn hot in there, that made it all the more easy to remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. I was standing there looking at the car and said 'f**k it'. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...