Jump to content
SAU Community

Recommended Posts

hey guys i got some plugs and changed my spark plugs yesterday , I was told by mechanic to run BKR7E and regap them at around 0.6mm gap . Now it idles great and doesnt hunt , drives real smooth but when i get it a hit it sounds terrible like a spark breakdown sound around 6,0000 and above . Im running fully built engine with Splitfires and i have never had this issue but then again i have never run that gap or plug before , (always BCPR7ES @ 0.8MM) also now im noticing my 555cc injectors reach 100% without really any load/boost ?

what have i done to my car ? can anyone help me

Link to comment
https://www.sau.com.au/forums/topic/356650-engine-splutter-at-high-revs/
Share on other sites

are you running 555cc and Z32 with an untuned PowerFC?

I'm assuming this from your latest thread about idle problems.

If so, it's makes perfect sense why your injectors are smashing 100% and your car is misfiring.

if the injectors are randomly hitting 100% under light load then check your afm wiring. i had a similar problem with the same setup, a dodgy afm wire was randomly earthing out and sending the pfc 5.1v when just cruising along

Yeh it could have that I'll look into it ? Do I just Check all wires are ok and not touching or do I have to pull apart and re solder ? Btw my car is makin 288rwkw and never maxed out past 75% until now . Fixed issue with plugs .. But still 100% duty with no splitterin . Can a slipping clutch cause faulty readings?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can ship Nismo floor mats to you: https://www.oemsoko.co.jp/products/nismo-floor-mats-for-skyline-r33-bcnr33-stagea-wgnc34?_pos=1&_sid=9278c1467&_ss=r  
    • Here's the link: https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6642/misc/G49?frame_no=WGNC34-137122 What you think about it? The same product i found on nengun: https://www.nengun.com/oem/parts/40567/MiPwn5qAMfCfmpxHNDnwn5q9MDAx8J-QiW9sZC1qcC0xMTAtRzQ5LS0wMDE/Floor+Carpet+%2F+Mat+2/0688339eba149c19 Bot i have spoken to 😅 ensured me, that mats are 100% original, oem product. I have my doubts. I also heard what you mentioned, that nengun often offers items that are actual not available... On the other hand mats i found on japanese yahoo or ebay are in poor condition and still quite expensive so i'd rather wait for some better offers. My location - Poland. We literaly don't have ANY market for used Stagea parts so need to search outside Europe.
    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
×
×
  • Create New...