Jump to content
SAU Community

Recommended Posts

Havent had any experience with them bro,

but from what i hear its all good. As long as they can provide you with all relevant paperwork ie full auction reports, de-reg certificate, export certificate etc

while also getting an inspection then you should be good to go! They may even email you the auction sheet for forum members to help you with...

Edited by TUFF_350

bought my 350gt of dimirty there (it was actually his car, not the dealerships). They're a pretty good mob there, honest and dont dick you around.

Always get an independant inspection however, no matter how honest the trader is, they can still miss things.

But all in all, good cars and nice people, just use common sense and check all the details.

Hey guys,

I did a search of the forums regarding buying from Nagoya motors in Caringbah. So far the comments have been mostly good.

Has anyone bought from them recently? Are they good to deal with?

Cheers

I bought my V35 from them in July last year. I found them very easy to deal with and they had good quality stock on offer. I did have one issue within the week - a door lock motor had failed and wasn't locking - and they ended up swapping one out from another car to get me on my way (I live in Canberra). That was a bit of a battle, as they wanted to get my failed one repaired but ended up not being able to so I hassled them to take one from another car. Still, they did it and the car's been fine otherwise.

And be careful with the paperwork and details provided. I was sold my car as a 2005 (I've still got a copy of the details published on their website), and it *was* a Series II, but when they signed me over the paperwork I found out it was a December 2004 build date. Nissan started making the Series II in November 2004. I went ahead with it because I'd already paid to have cruise installed and Toyo T1R's put on.

Dmitriy is the one who knows the Skylines, but you'll probably deal with Alex (I think he's the boss). If you've never been there before it's easy to drive past them as they have a thin street frontage. Just look out for a mass of Delica's parked out along the road - it's their extended yard.

Edited by Stuart McK

do the usual checks for paint/dints/ repairs and you wil be right.

messiah flew me down for the day to help him with his purchase. nagoya was teh third and final place he looked and I had put a scan tool across all the cars he looked at. the S3 V35 that he bought from nagoya was flawless and they even programmed the BT phone for him as well. good service was what I saw from an outside point of view. (they somewhat knew who I was and why I was there as well.)

Got my v35 from them september 2010, have not had a problem with the car. Getting it serviced this Monday, ill let you guys know how it goes as im getting it serviced by a performance shop and they will be able to point out any faults or problems. But other than that generally their cars are pretty clean.

do the usual checks for paint/dints/ repairs and you wil be right.

messiah flew me down for the day to help him with his purchase. nagoya was teh third and final place he looked and I had put a scan tool across all the cars he looked at. the S3 V35 that he bought from nagoya was flawless and they even programmed the BT phone for him as well. good service was what I saw from an outside point of view. (they somewhat knew who I was and why I was there as well.)

I thought u knew dmitry chris? he knows you.

I brought my car from him, also a personal car he brought in, not a car yard one.

He looked after me, the Bose radio didnt work and he swapped another one over for me. Still have to sort out something that i have been lazy to do so regarding an alarm not being put in but i will contact Dmitry and see how the after support is and let you guys know.

most of the sydney based dealers know me or know of me. I'm not exactly private with what I work on when you think about it. I often get calls from dealers around the country asking me questions.

dimitry met me when simon bought his car. and he met me with a launch scan tool in hand.

most of the sydney based dealers know me or know of me. I'm not exactly private with what I work on when you think about it. I often get calls from dealers around the country asking me questions.

dimitry met me when simon bought his car. and he met me with a launch scan tool in hand.

What does the launch tool tell u about our cars? (what function did you use when looking at the cars) ?

What does the launch tool tell u about our cars? (what function did you use when looking at the cars) ?

I look at fault code history with it. if I see a airbag error I go digging deeper and start inspecting things physically. did that on one car that simon looked at in northwest sydney.

I also look at fault history in the engine as well. same thing with that.

other than that its a debugging tool for me and a VERY expensive one. ($4k)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
    • How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
×
×
  • Create New...