Jump to content
SAU Community

Recommended Posts

Havent had any experience with them bro,

but from what i hear its all good. As long as they can provide you with all relevant paperwork ie full auction reports, de-reg certificate, export certificate etc

while also getting an inspection then you should be good to go! They may even email you the auction sheet for forum members to help you with...

Edited by TUFF_350

bought my 350gt of dimirty there (it was actually his car, not the dealerships). They're a pretty good mob there, honest and dont dick you around.

Always get an independant inspection however, no matter how honest the trader is, they can still miss things.

But all in all, good cars and nice people, just use common sense and check all the details.

Hey guys,

I did a search of the forums regarding buying from Nagoya motors in Caringbah. So far the comments have been mostly good.

Has anyone bought from them recently? Are they good to deal with?

Cheers

I bought my V35 from them in July last year. I found them very easy to deal with and they had good quality stock on offer. I did have one issue within the week - a door lock motor had failed and wasn't locking - and they ended up swapping one out from another car to get me on my way (I live in Canberra). That was a bit of a battle, as they wanted to get my failed one repaired but ended up not being able to so I hassled them to take one from another car. Still, they did it and the car's been fine otherwise.

And be careful with the paperwork and details provided. I was sold my car as a 2005 (I've still got a copy of the details published on their website), and it *was* a Series II, but when they signed me over the paperwork I found out it was a December 2004 build date. Nissan started making the Series II in November 2004. I went ahead with it because I'd already paid to have cruise installed and Toyo T1R's put on.

Dmitriy is the one who knows the Skylines, but you'll probably deal with Alex (I think he's the boss). If you've never been there before it's easy to drive past them as they have a thin street frontage. Just look out for a mass of Delica's parked out along the road - it's their extended yard.

Edited by Stuart McK

do the usual checks for paint/dints/ repairs and you wil be right.

messiah flew me down for the day to help him with his purchase. nagoya was teh third and final place he looked and I had put a scan tool across all the cars he looked at. the S3 V35 that he bought from nagoya was flawless and they even programmed the BT phone for him as well. good service was what I saw from an outside point of view. (they somewhat knew who I was and why I was there as well.)

Got my v35 from them september 2010, have not had a problem with the car. Getting it serviced this Monday, ill let you guys know how it goes as im getting it serviced by a performance shop and they will be able to point out any faults or problems. But other than that generally their cars are pretty clean.

do the usual checks for paint/dints/ repairs and you wil be right.

messiah flew me down for the day to help him with his purchase. nagoya was teh third and final place he looked and I had put a scan tool across all the cars he looked at. the S3 V35 that he bought from nagoya was flawless and they even programmed the BT phone for him as well. good service was what I saw from an outside point of view. (they somewhat knew who I was and why I was there as well.)

I thought u knew dmitry chris? he knows you.

I brought my car from him, also a personal car he brought in, not a car yard one.

He looked after me, the Bose radio didnt work and he swapped another one over for me. Still have to sort out something that i have been lazy to do so regarding an alarm not being put in but i will contact Dmitry and see how the after support is and let you guys know.

most of the sydney based dealers know me or know of me. I'm not exactly private with what I work on when you think about it. I often get calls from dealers around the country asking me questions.

dimitry met me when simon bought his car. and he met me with a launch scan tool in hand.

most of the sydney based dealers know me or know of me. I'm not exactly private with what I work on when you think about it. I often get calls from dealers around the country asking me questions.

dimitry met me when simon bought his car. and he met me with a launch scan tool in hand.

What does the launch tool tell u about our cars? (what function did you use when looking at the cars) ?

What does the launch tool tell u about our cars? (what function did you use when looking at the cars) ?

I look at fault code history with it. if I see a airbag error I go digging deeper and start inspecting things physically. did that on one car that simon looked at in northwest sydney.

I also look at fault history in the engine as well. same thing with that.

other than that its a debugging tool for me and a VERY expensive one. ($4k)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
    • I suppose it was relatively stock too, the JZ motor handle most mods thrown at them without even breaking a sweat 
×
×
  • Create New...