Jump to content
SAU Community

Charcoal Canister


Recommended Posts

hi guys, just wondering if anyone knows where the line that runs down under the passenger side goes??. it runs along the inside of the chassis and into a square plastic box attached to the rail, does it stop there or run up inside the rail somewhere(it runs to the bottom of the canister). next question can it be disconnected easily at the box point, i need to cut this steel line at the firewall as im re-locating the canister up near the wiper motor before i do my new turbo install.

cheers.

Link to comment
Share on other sites

hi guys, just wondering if anyone knows where the line that runs down under the passenger side goes??. it runs along the inside of the chassis and into a square plastic box attached to the rail, does it stop there or run up inside the rail somewhere(it runs to the bottom of the canister). next question can it be disconnected easily at the box point, i need to cut this steel line at the firewall as im re-locating the canister up near the wiper motor before i do my new turbo install.

cheers.

pretty sure the line that goes into the chassis rail on lh side stops there. think its just a fitting with nothing on the other side and it just breathes into the rail

Link to comment
Share on other sites

I thought it went back to the fuel tank, and is a breather for the tank?

theres a hard line that finishes near clutch booster on rh side, short hose then across firewall and to canister, then one goes from canister up lh side into plastic fitting in chassis rail. think either nothing on other side or short hose.

Link to comment
Share on other sites

ok, ive already modded the one that runs under the right hand side. there is one breather in th chassis rail basically under the canister, thats why i wasnt 2 sure if it was another breather. ill have 2 get a better look, car is low :P hard to get under. ill have 2 whip out the jack 2 morrow. but thanks 4 the replies.

Link to comment
Share on other sites

  • 3 weeks later...

Can i hijak this thread for a econd to ask why the charcoal pours out of the bottom of my can, is this normal..

i was going to refit it but soon as i turn it right way up it all pours out the bottom..It was off the car when i bought it so I dont know..

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • The time has come once again, for another SAUNSW Sunday Session! You all know the drill by now, fam... This is the perfect event to catch up with the SAUNSW crew, hang out for a coffee and a bite to eat, and get in some photos and friendly banter! So without any ado, here are the details: Date: Sunday 14 July 2024 Meet Location: Penrith Krispy Kreme (at Penrith Panthers - Panthers Place, Mulgoa Rd, Penrith) Meet Time: 8:00am Map: https://tinyurl.com/saunsw-penrithkk  This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAUNSW event and will be run under a Motorsports Australia permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU:NSW and thus, treat others accordingly. • Any misbehaviour will not be tolerated and you will be asked to leave. Thanks guys and hope to see you there!
    • Who's itching for another cruise...?? That's right! You are! And so are we! And what better cruise to run than an Old Pac Run!! So without any ado whatsoever, here are the details for you to save: Date: Saturday 22nd June 2024 Meet Location: Cowan Truck Stop (Pacific Motorway - Refer to Map) Meet Time: Meet at 7:00pm for a 7:30pm departure Destination: Gosford McDonald's (65 Pacific Highway, Gosford West) Map: https://www.google.com.au/maps/dir/Cowan+Rest+Area+-+Truck+Stop,+Cowan+NSW+2081/mcdonalds+gosford/@-33.5145054,151.1875996,11z/data=!4m39!4m38!1m30!1m1!1s0x6b0d50be6b302f7b:0x52a920c40b292919!2m2!1d151.1590113!2d-33.6115097!3m4!1m2!1d151.1632842!2d-33.6047898!3s0x6b0d509345312641:0xb510e358747a5332!3m4!1m2!1d151.2008176!2d-33.5274838!3s0x6b0d4e5adac43725:0x611c05fee203a98a!3m4!1m2!1d151.1925869!2d-33.4598502!3s0x6b0d4926bcb9e627:0xd95f510d7f39b402!3m4!1m2!1d151.2072744!2d-33.4523186!3s0x6b0d49138231a221:0xaf20c78b79e9db5a!3m4!1m2!1d151.2318957!2d-33.4309951!3s0x6b0d4989b4996d83:0xeae9af9b71739b59!1m5!1m1!1s0x6b0d4aaa920441e5:0x33f1be63f4680e2f!2m2!1d151.32463!2d-33.4269!3e0?entry=ttu Definitely an easy one for this cruise, meet at Cowan Truck Stop and jump straight onto Old Pacific Highway! Final stop at McDonald's which has plenty of parking all around. There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our track days. This is an official SAUNSW event and will be run under a Motorsport Australia permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU:NSW and thus, treat others accordingly. • Any misbehaviour will not be tolerated and you will be asked to leave. Thanks guys and hope to see you there!
    • Thanks, I'll have to cobble something like sonicii did, will report back
    • Agree! I still believe I have the quietest 400kW+ R33 in Australia.
    • ah gotcha ill go remeasure again, thanks for all the tips. when i measured the TPS 5v reference voltage, i put my multimeter leads on 5v power and strut tower bolt, it gave me 5v with boost sensor disconnected and with boost sensor connected it gave me 1.4v. ill try remeasure again this time with volt meter both on the 5v reference and TPS signal ground wire.
×
×
  • Create New...