Jump to content
SAU Community

Recommended Posts

My car seems to be having some serious issues here

Was driving to the drags one evening and it suddenly just stopped working

(thank god it didnt happen on the drag strip)

It refused to start even when my friend helped me to jump start it

Towed it to the workshop and they told me they had spark but the injectors seems to be flooding the engine and the only thing they could think of is the ECU is ****ed. The workshop is going to be closed for the weekend so they said they'll test the ECU on monday

Recently before the incident Ive been having problems starting the car

sometimes I had to put some gas into it before it would crank over

and also a few days before I had a bosch 910 installed without a FPR

and exhaust cam gear set to 4Deg retard

So any ideas?

just incase it maters my car is a 1996 R33 Series II Auto

Here's the list of mods I currently have

S-AFCII

Profec B boost controller

Bosch 910 (no FPR)

HKS Exhaust Cam gear

Trust Cat-back

SS high flow cat

Front pipe

Trust V-SPL intercooler

Apexi Air Filter

cheers

Link to comment
https://www.sau.com.au/forums/topic/35704-engine-flooding-problem/
Share on other sites

  • 1 month later...

I dont think you need a FPR...

Could be stuffed injector stuck open... be carely that you havent filled you cylinder/s with fuel and may have compression locked your motor .... pull the dip stick out and check to see if it smells like fuel??? It s not a common thing - but it does happen, trust me ;-<

Dan

Pump the throttle???

1. efi cars are ment to be started with the foot off of the throttle

2. would pumping the throttle actually do anything?? - its not like an old carby that opens up secondary squirters when pumped.

3. when you said you had a pump installed without a FPR, do you mean you removed the standatd/afrermarket FPR on the fuel reguator? if so why??

4. This may not explain why it flooded, but it indicates a few problems.

well it wont start with or without throttle

and the standard FPR is still there

When I installed the fuel pump my workshop said it might blow the standard FPR because of overpressure. How does that make sense? doesnt the FPR control the pressure?

IMACUL8:

checked out that possibility as well but its not compression lock

but havent checked the injectors though

If the engine is "flooded", you need to try and start with the "pedal to the metal" - this is to allow as much air as possible in to help ignite the fuel. DO NOT pump the throttle - that only adds "acceleration" fuel, and worsens the situation.

If the CAS was crook, you would not have spark.

I have been running the standard FPR in my 32 with a Bosch pump, and no problems encountered for nearly 2 years.

Can you hear the injectors working when trying to start the engine?

You are probably going to have to pull the injectors, so arrange to get them cleaned while they are out.

  • 2 weeks later...

BACK ON THE ROAD!

turns out the CAS was electronically alive but mechanically dead!

and the little stick at the end of the cam shaft had snapped

oh well got HKS 256 in there now

when the engine is warm the cams are kinna noisy

is this normal?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm thinking that this is such a small part of the problem that you could easily forego the vac pump and just achieve 90% of what you need, which is keeping the gate open when off boost. It's not as if there are not already techniques to keep a gate fully closed under boost. After all, you have boost. Just use a wastegate actuator that will allow you to apply the boost on the appropriate side, just like every external gate out there.
    • Heres another fitment photo. redrilled the pattern to 5x112, and threw my audi´s rims on. had to touch the upper control arms with grinder, because the "sharp corner" was sticking about 2-3mm on the tire path. i have the "fender lip" mostly cut off, otherwise these (too) would contact with it. 20x9.5 ET25 rear    265/30 20x8.5 ET20 front    255/30 they are temporary, and look too big for the chassis. searching for 19s to it.
    • From experience, it will come back to bite you haha.
    • Background: my BMW 225i hatchback (rebodied MINI/X1) came with 3x RE003 and 1x Goodyear Asymmetric something. The RE003 roared and slid around, the Goodyear side was quiet and grippy. Definitely my car was thrashed before it got sent to dealers. My brother also got RE003 all round on his old VA WRX STI, I wasn't impressed with them, car was loud so can't comment on noise. Anyway, Hankook stopped making/updating V12 Evo2. So bought S1 Evo3 runflats. Great daily duties tyre and not that harsh ride. Tyre reviews site/youtube rated them as best stopping in the rain and I believe them. Next set, Goodyear Asymmetric 5 non-RFT. It beat PS4 in tests and is like $100 cheaper, so put them on. Great tyre, more grip then S1 Evo3 but a tad noisier as expected, still rocking them. Next set I am looking to go runflats, probably the new Hankook Evo. Although the new Pirelli PZ5 did well in tyrereviews test. Or go Goodyear Asymmetric 6 which was top tyre last year. The V12 Evo2 on my gen5 Liberty GT wagon did great in cold condition (drove to snowy mountains for a day so my husky can feel his ancestor's roots). Super impressive performance for $120 each lol. Never skimp on tyres, brakes, suspension. There's old pics of my R31's crappy random brake pads bending in the caliper at Oran Park track day somewhere around here. Anyway, my 2 cents.
×
×
  • Create New...