Jump to content
SAU Community

Recommended Posts

I have been seeing an increase in skylines in the area and thought It might not be a bad idea to see who's about and what they are doing with there car's.

So list it out like this:

Car: 1992 R32 GTST.

Colour: White with black boot and bonnet.

Mods:Pod, Exhaust, Coilpacks, FMIC, Nistune.

Plans for the next Mods: Turbo and Injectors

Owned for: 8 months

Any other imports(this can be current or previously owned): R33 GTST 300zx TT

anything else you can think of feel free to add, Wouldn't mind getting a north area cruise group happening or even a meet and greet.

Yeah man I have a r32 gtr silver no. Plates is slo26 but I live in kallangur mods r twin t517z kls low mount manifolds 3.5 inch dumps PFC 740cc injectors splitfire coils sard fuel pressure reg denso pump twin z32 afm boost 2 twin plate osgiken clutch the only problem is there's a noise in the head maybe bent valves so that's what's next on the list can't wait to get it fixed then I'll have the 300awkw monster back on the road

we just purchased an 1993 R33 GTS25T 4 door turbo

its silver and auto (missus cant drive a manual and it will be somewhat of a daily for her)

getting it rego'd next week

its stock as a rock except a turbo timer

even has the factory casette deck and an air purifier in the parcel shelf!!

we are at Narangba

I drive a 1990 MX83 cressida with a 1jz in it

its also silver with a big PWR front mount hanging out the front

has big single turbo running 18psi and a 3k high stall auto (going to manual as soon as I can afford it) 3" exhaust with twin 3" pipes(drift style)

good fun suprising the kids around here haha

I live in the north as well and own a wine red R32 GTS-T. I Have owned this car for about 10 years nows. I just can't let go.

Mods - PWR radiator, GTR Injectors, z32 afm, Bosch 040, Returned ecu, HKS GT-RS turbo, Tein SS Jap spec suspension with EDFC, cusco LSD 2-way.

Engine is healthy but is leaking oil out of tapet covers again Grrr.

Car make a fare amount of power at 23psi but I have never dynoed it to get the true rwkws reading.

I will be getting a new EBC and nistune very shortly and next year maybe sway-bars and cams.

Edited by RedDrifter

we just purchased an 1993 R33 GTS25T 4 door turbo

its silver and auto (missus cant drive a manual and it will be somewhat of a daily for her)

getting it rego'd next week

its stock as a rock except a turbo timer

even has the factory casette deck and an air purifier in the parcel shelf!!

we are at Narangba

I drive a 1990 MX83 cressida with a 1jz in it

its also silver with a big PWR front mount hanging out the front

has big single turbo running 18psi and a 3k high stall auto (going to manual as soon as I can afford it) 3" exhaust with twin 3" pipes(drift style)

good fun suprising the kids around here haha

Nice R33 is a good choice my missus wants one because I used to have one and she loved it.

I want to see this cressida it sounds badass

the cressida is pretty ordinary in the looks department

but it goes ok

need to get an aftermarket computer for it to really tap its potential

just picked up a set of Bigwin side skirts and rear bar for it today just need to get them repaired (has some damage) and need a front bar

all in good time.

The skyline will get the usual mods once its registered and just replace things as they break

I live in the north as well and own a wine red R32 GTS-T. I Have owned this car for about 10 years nows. I just can't let go.

Mods - PWR radiator, GTR Injectors, z32 afm, Bosch 040, Returned ecu, HKS GT-RS turbo, Tein SS Jap spec suspension with EDFC, cusco LSD 2-way.

Engine is healthy but is leaking oil out of tapet covers again Grrr.

Car make a fare amount of power at 23psi but I have never dynoed it to get the true rwkws reading.

I will be getting a new EBC and nistune very shortly and next year maybe sway-bars and cams.

Welcome to the thread, That turbo is some seriously expensive kit man, How does it perform?

the cressida is pretty ordinary in the looks department

but it goes ok

need to get an aftermarket computer for it to really tap its potential

just picked up a set of Bigwin side skirts and rear bar for it today just need to get them repaired (has some damage) and need a front bar

all in good time.

The skyline will get the usual mods once its registered and just replace things as they break

Looks are not everything. I am planning on doing a sleeper as my next car.

Welcome to the thread, That turbo is some seriously expensive kit man, How does it perform?

Looks are not everything. I am planning on doing a sleeper as my next car.

I bought the kit from Nengun 4 years ago when the AUD was strong against the yen. Picked the kit up for a real good price.

The turbo is as big as you would want to go for a street RB20.

Response vs power output is incredible.

well our skyline should be rego'd on friday woot

started it on the weekend and it made the rattle sound at the front near the timimg belt cover area so i am guessing its in need of a belt/ tensioner/ bearing change from all the youtube and forum reading ive done????

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Just had this happen to me too.  R32 GTR.   Also broke "just before going out onto the track" - someone up there is looking out for us... Very scary since I was about to do a narrow street course with zero run-off and curbs everywhere. Many people on here upgrading to billet uprights and R35 bearings?   Or buying new OEM knuckles?  I am not keen to replace with another s/h 30 year old fatigued part.
    • Top off with distilled water and see what happens. If you keep losing coolant then you know to start looking.
    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
×
×
  • Create New...