Jump to content
SAU Community

Recommended Posts

I have recently been looking for a manual R34 GT (N/A), and have been struggling to find one in my price range (yes, slightly limited). There have been a few autos I have seen which were cheap, but after doing some driving in autos, I could never buy one for myself. I find them boring. I'm wondering if converting an auto into manual is too hard to be worth it? or too expensive? I appreciate any advice or personal experience you can share.

Thanks guys. ;D

Use the search function next time. If you can't afford a factory manual, chances are you can't afford to buy an auto and convert it to manual.

The cost is easily $2000 minimum for parts (chances are closer to $3000) without labour. Then if you want to do it properly, you'd need to change the center console, cluster and other associated items.

Here's a thread that provides some good information - http://www.skylinesaustralia.com/forums/topic/139916-diy-r34-manual-conversion-using-r33-parts/

But as I said earlier, chances are that if you can't afford a factory manual, you can't afford to convert an auto to manual. The conversion is mainly for people whom own an auto already. Chances are you won't save a cent by doing this and you'd be better off saving for money for a while longer.

Edited by Truffles
  • Like 1

Thanks for the advice guys. I'm gonna keep looking into it. Wreckers would definitely be a good option

and just btw, Truffles, I personally found the autos are going a fair bit cheaper than manuals. Often 2-3 grand. Yes, if your price guide is right, this doesn't make it a money saving venture at all, unless I find a particularly cheap auto. I wanted a good base of a car to last me for a a few years (I wanted low km's), and would settle for a car that wasnt exactly what I was looking for. Im quite happy to get my hands dirty and work on it myself to get it the way i wanted. This was the car I had my eye on:

http://www.carsales.com.au/pls/carsales/!dealer_content.dealer_vehicle?vehicle_id=9855983&current_rec=4&total_rec=10&sort_type=1&dealer_id=12510&make_id=5

I know what you're thinking. Sounds too good to be true? At that price and km's, I'm a bit suss of it myself. But if i could make an auto-manual conversion viable, then this may (after getting it inspected and milage verified as much as possible) be a good car as a base to work on over the next few years. (till Im off my P's tongue.gif)

Oh and sorry, I didnt know i could search for forum topics. Spent a couple of hours scanning page after page looking for a topic on this. I feel like a bit of an idiot, haha. Still new to SAU.

  On 28/03/2011 at 1:41 PM, mitch92 said:

Thanks for the advice guys. I'm gonna keep looking into it. Wreckers would definitely be a good option

and just btw, Truffles, I personally found the autos are going a fair bit cheaper than manuals. Often 2-3 grand. Yes, if your price guide is right, this doesn't make it a money saving venture at all, unless I find a particularly cheap auto. I wanted a good base of a car to last me for a a few years (I wanted low km's), and would settle for a car that wasnt exactly what I was looking for. Im quite happy to get my hands dirty and work on it myself to get it the way i wanted. This was the car I had my eye on:

http://www.carsales....12510&make_id=5

I know what you're thinking. Sounds too good to be true? At that price and km's, I'm a bit suss of it myself. But if i could make an auto-manual conversion viable, then this may (after getting it inspected and milage verified as much as possible) be a good car as a base to work on over the next few years. (till Im off my P's tongue.gif)

Oh and sorry, I didnt know i could search for forum topics. Spent a couple of hours scanning page after page looking for a topic on this. I feel like a bit of an idiot, haha. Still new to SAU.

that's about the going price for an n/a auto r34 skyline, you can actually import some nice auto r34 skylines from japan with slightly lower mileage and also with grade 4 condition for cheaper anyway, people just try to get the autos for more than they're actually worth on carsales and other places. although imo, that's reasonably priced for an r34 auto n/a being sold in australia. well, for a coupe anyway.

Oh right. Yeah, I've been going off the carsales prices. I just assumed thats what they were worth. May not be too good to be true then. thanks. However, I have gone back to looking at just buying a manual and forgetting the conversion thing as it seems like a fair bit of time and trouble to find parts and get the job the done, with very little, or no money saved at the end of the day.

buying a manual is the smartest thing to be honest and it would be illogical to convert a NA for that money, i dont know what your expecting from a manual i driven one its not that different and i would say my Auto pulls just the same if not harder then a Series 2 with 60000ks on the clock.......or thats just maybe me.

I'm not really expecting anything much better in terms of performance from a manual over an auto. I personally just find auto's boring to drive. I have more fun in manuals. :P but thats just me.

  On 29/03/2011 at 1:16 PM, mitch92 said:

Oh right. Yeah, I've been going off the carsales prices. I just assumed thats what they were worth. May not be too good to be true then. thanks. However, I have gone back to looking at just buying a manual and forgetting the conversion thing as it seems like a fair bit of time and trouble to find parts and get the job the done, with very little, or no money saved at the end of the day.

probably a good idea at the end of the day because converting an n/a auto r34 to manual is a waste of time, but that's just me.

  On 30/03/2011 at 10:43 AM, JDM34 said:

probably a good idea at the end of the day because converting an n/a auto r34 to manual is a waste of time, but that's just me.

time isnt as much of an issue as money is atm, but since theres no money to be saved by doing it, you're right. Waste of time.

if you are attached to the car then do it. if not, save the pennys and buy something else. I done my GTST a few years back but it was in perfect condition. cost me about $3000 to do (probably be a bit cheaper now). you will improve in rwhp as well as autos suck more power than the manual. I gained almost 50hp with the conversion and a fmic (turbo motor though)

  On 02/04/2011 at 6:32 AM, Pal said:

if you are attached to the car then do it. if not, save the pennys and buy something else. I done my GTST a few years back but it was in perfect condition. cost me about $3000 to do (probably be a bit cheaper now). you will improve in rwhp as well as autos suck more power than the manual. I gained almost 50hp with the conversion and a fmic (turbo motor though)

He doesn't own the car. Which is why we came to the conclusion that any price difference between the two would be negated by the cost of a conversion. Therefore, you might aswel just buy a factory manual and cut out the middle man.

It's a bad idea to stretch the budget to buy the car, I did it and I regret doing it. As soon as repairs and maintenance fees start building up you'll be going into the red. Eg clutch or coilpacks could go at any time, and you'll randomly have to fork out many hundreds.

Just a warning, though you'll probably ignore it and if things go sour you'll be telling some p plater to be careful about stretching his budget in 18 months :P

Hopefully not though.

Oh and btw transmission is a waste of time and money. The cheapest option for any factory-to-factory conversion is to just sell and buy again, also helps with resale.

  • 4 weeks later...

shift kit! 7,000RPM quick shifts with chirpies! That's on a fully rebuilt box though which set me back around $3300 with HD Kevlar internals and new set of solenoids...but the difference it made! There's no denying the gains to be had between a rebuilt auto and a manual due to the nature of the two transmissions, but I like having the tiptronic for daily driving.

  • 3 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • One thing I can tell you is, do it properly the first time. If you encounter unexpected problems just let the car sit for a week or two if you have to get some other parts or figure stuff out.  I'd have said go and use as many OEM parts as possible but since you want to change the turbo later on a custom kit is probably the better choice. Since I have no experience with RB25 just compare parts diagrams and images before buying a line kit and it should be easy to see if it has everything you need. Amayama has very good parts diagrams and part number lists, that is what I used a bunch to figure out what I might need. And don't forget to plan ahead and possibly renew other stuff that's easy to get to while you're in there doing the turbo lines. Happy wrenching
    • Update 4:   Hi all, good news. Engine is running and all the gaskets and seals seem to be working as intended. No leaks so far, even the JB Weld seems to hold. I flushed out the old coolant a few times and put in fresh coolant, not Nissan stuff, I decided to try the Ravenol Protect FL22, they claim it works for a wide variety of JDM cars and the opinions on it by some people were pretty good. And it has the nice poison green color! And man am I glad I bought a coolant system tester earlier this year, vacuum filling works wonders on this engine. I can definitely recommend this to anyone still doing it the old school way. All you need is compressed air supply. Will have to do a small test drive as soon as I can, I removed the gauge cluster again as the tacho needle was still bouncing around a bit but it was much better than before already.  I also found some cracks on all 4 tires inner and outer sidewalls. Apparently these tires should 't be parked on for extended periods or be kept under 0 degrees during storage, which I did not know. Clearly the previous owner didn't look into those details either, he probably bought them just cause they are cool semi-slicks. I'm just wondering how tf I am supposed to reach 30-80 degree tire temperatures on the public road consistenly, these tires were never going to work for my use case. I'll probably order Continental SportContact7 ones as these are the best allround summer tire available right now and I don't think I'll need anything crazier for now. Do let me know if you have experience with various tires and which ones you recommend.
    • You have no idea how many goddamn boxes I received these past three months haha Most have been put to use by now though, luckily
    • Not going to pretend I didn't do a bit of junky work this time around, but mostly due to the fact that some things I am not willing to spend days fixing right now, like wiring. I try to do most things properly the first time around.
    • Regardless of neglect or incompetence, fixing either is tedious and annoying. Most of the neglect on my car is definitely rust. I hope I can at least pass inspections later on and they won't fail the car due to slightly corroded hardlines. I was generous with rust converter and wax and it looks ok, most lines in the rear are hard to see properly anyways.  Definitely will test them though to make sure they don't rupture under pressure, in that case the car isn't going anywhere this year.
×
×
  • Create New...