Jump to content
SAU Community

Recommended Posts

Only need 3.5L or so in an R33. I bought a 3.78L container of Redline Heavy Weight Shock Proof Oil for about $100, and there's about 300ml left in the bottle. This oil is meant to be the best, I guess that's why it cost $100 :D

There's a bit of improvement in the shift feel. It now doesn't crunch going into 5th at all (used to do it every now and then), and when the oil has warmed up the whole box is a lot smoother. When cold though it can be a bit hard to shift into 1st or 2nd.

Apparently it will improve even more after a few weeks, I'd only had it in less than a week before I got rear-ended. I guess I won't see any improvement for another week or 2 after I get it back from the repair shop (and god knows when I'll get it back).

I dunno, the whole thing could just be a gimmick but I had a spare $100 and from the reports I read it was meant to preserve your gearbox more than any other oil so I thought I may as well get it. But if you see photos of a gearbox that has this oil in it, you can definitely see how it sticks to everything inside and lubricates it all properly.

Unless you have a major syncro problem then Light weight Shockproof will be good enough. I absolutely swear by it cos I was looking down the barrell of a $3k gearbox rebuild for the 3-4 upshift problem. 4Litres and $100 of LWSP oil later and problem solved. Ask Mikey, he drove the GTR before and after I sold it to him.

Also fixed a similar problem in my 300ZX TT DD.

Ken

I ordered mine from TTZ Performance in Melbourne and got it delivered. I emailed [email protected] who works there (or owns the shop, I dunno). You can also ring them up on 03 9842 7699. Talk with them to find out what level of crunchiness your gearbox is at and they will recommend light or heavy oil to go with it.

Read here - www.redlineoil.com

I use their Shockproof & 75W90 gear oil, both are excellent! Improvements have been noticeable over VMX80 & Motul. I've not tried their eng' oil but Motul 300V has been faultless so far so I won't be changing.

For a rough price guide (AUD) have a look here - www.gearbox-racing.com They're a local Adelaide performance g/box workshop who stock Redline.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @Haggerty you still haven't answered my question.  Many things you are saying do not make sense for someone who can tune, yet I would not expect someone who cannot tune to be playing with the things in the ECU that you are.  This process would be a lot quicker to figure out if we can remove user error from the equation. 
    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
×
×
  • Create New...