Jump to content
SAU Community

Recommended Posts

I'll start by saying my car got yellow stickerd on saturday for a loud ehxuast.. Now what I need to know is whats the deal with taking ur car to the pits? Is it easy to spot the place to line up place if im the first person there.. Also does the O'Connor pits accept skylines? ... And is it hard to get a booking at any of the other places ? because my car will be unlicensed by the 14th if i dont get it down there before that date..

THANKS!

Link to comment
https://www.sau.com.au/forums/topic/360155-pits-question/
Share on other sites

I got yellow as well for pod and not having mash at the front bumper 2 weeks ago .

went to O'Connor with all my mods and adjustable coilovers they just told me to raise the car a bit coz the exhaust part was below minimum 100mm.

It all depends who you get as an inspector sometimes they can be nasty or good to you ...

try to keep it as stock as possible no flashy mods and all you lights & indicators ,seatbelts must work and you will be fine.

if you modified turbo ,exhaust manifold,suspension you will need to fill Vehicle Standards Bulletin 14 (VSB 14) from and submit it usually take around 3-4 weeks for form to get processed.

http://www.infrastructure.gov.au/roads/vehicle_regulation/bulletin/vsb_ncop.aspx

hope this helps mate

Link to comment
https://www.sau.com.au/forums/topic/360155-pits-question/#findComment-5750602
Share on other sites

Fees yeah, initial fee is like 87 or something.

Retest 70something.

For the non bookings, if you want first in, get there really early.

I just got there about lunchtime, brought food drink and played games on my phone lol. (Waited 30-45mins-ish)

As for spotting it, I went to the Welshpool one and its next door to the licensing centre there - 4 big lanes with roofs over it so yeah, easy to spot :P

Edited by Ten Four
Link to comment
https://www.sau.com.au/forums/topic/360155-pits-question/#findComment-5750797
Share on other sites

I'll start by saying my car got yellow stickerd on saturday for a loud ehxuast.. Now what I need to know is whats the deal with taking ur car to the pits? Is it easy to spot the place to line up place if im the first person there.. Also does the O'Connor pits accept skylines? ... And is it hard to get a booking at any of the other places ? because my car will be unlicensed by the 14th if i dont get it down there before that date..

THANKS!

LOL does the oconnor pits accept skylines! hahaha

ok seriously, first inspection fee is $87.40, reinspection fee is $61.00, just go there and you will see which line you have to go to. If you are going for an inspection prior to 830am please make sure you pre-pay your inspection (go to a licensing centre or call 13 11 56 to pre-pay).

Link to comment
https://www.sau.com.au/forums/topic/360155-pits-question/#findComment-5751680
Share on other sites

....

ok seriously, first inspection fee is $87.40, reinspection fee is $61.00, just go there and you will see which line you have to go to. If you are going for an inspection prior to 830am please make sure you pre-pay your inspection (go to a licensing centre or call 13 11 56 to pre-pay).

Jeez, that's expensive (Or is it always been that prices?). :(

Link to comment
https://www.sau.com.au/forums/topic/360155-pits-question/#findComment-5751686
Share on other sites

Pretty sure it's always been those prices. Farkin bullshit when you have to pay for a reinspection to get an extension when you haven't changed anything... Like when I had to replace the aluminium pedals on my car with factory rubber ones, I couldn't find a factory accelerator pedal so I bought one from Nissan. Was gonna take 4 weeks to arrive so I tried to explain that to the pits. Nope, I had to get the car inspected that week to get a two week extension, then again in two weeks to get another one week extension. Had to pay fucking $185 despite knowing that it was going to fail each time.

Link to comment
https://www.sau.com.au/forums/topic/360155-pits-question/#findComment-5751746
Share on other sites

LOL does the oconnor pits accept skylines! hahaha

ok seriously, first inspection fee is $87.40, reinspection fee is $61.00, just go there and you will see which line you have to go to. If you are going for an inspection prior to 830am please make sure you pre-pay your inspection (go to a licensing centre or call 13 11 56 to pre-pay).

Do you work at the pits?

Link to comment
https://www.sau.com.au/forums/topic/360155-pits-question/#findComment-5751837
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...