Jump to content
SAU Community

Fully Built 1000Hp Rb26!

scr33m
 Share

Recommended Posts

dirty thimble Enthusiast

dirty thimble

Posted
Posted

rb26zed, on 03 June 2011 - 11:40 PM, said:

Sorry, I'm not interested in buying your engine, but I am curious as to how someone spends the time, effort and of course money to build a $22000, 1000hp engine, drives it 1500km then suddenly needs to sell it at a huge loss.

the guy i bought it off of got it built for his street gtr and decided to take it out to put it into another gtr for drag racing but decided he wanted an rb26/30 instead.

Still doesn't answer why you are selling it though after only just purchasing it.

hypo33 Contributor

hypo33

Posted
Posted

i dunno what fuss is about,, wish i had a spare 10k i would snap it up right away,, he does not need to give a reason for sale as u could just put it on a engine dyno before purchase if u are serious about buying this bargin and are skeptical about the sale. GL with your sale mate,, surprised its not sold,,, bloody tight arses.

  • 2 weeks later...
  • 2 weeks later...
SargeRX8 Grand Master

SargeRX8

Posted
Posted

8500....? ill give u 9 grand if u engine dyno it and prove its a healthy new motor capable of 1000hp...

pm me when your ready

That is a little hard for him to do. The motor was built by a reputable group(matouks, he is quite famous for his RB's). I'm sure if you call them up and ask about the motor they can help you out. I don't think scr33m has the turbo and other gear needed to demonstrate the 1000hp. Just because he bought the motor does not mean he has the turbo and other gear for it.

32rrr Collaborator

32rrr

Posted
Posted

That is a little hard for him to do. The motor was built by a reputable group(matouks, he is quite famous for his RB's). I'm sure if you call them up and ask about the motor they can help you out. I don't think scr33m has the turbo and other gear needed to demonstrate the 1000hp. Just because he bought the motor does not mean he has the turbo and other gear for it.

Just because a workshop built A 1000hp engine it doesnt mean that this is the one, the only way to proved this thing has all the fruit is to pull it down and have pictures of ALL the parts that are in it, for the sake of being able to proved everything is there you dont even need to replace anything except the head gasket.

Showing the engine sitting on a pallet like that means nothing to me or anyone who is actually looking to buy something like this to save themselves some money

As far as i'm concerned with seeing the picture thats been supplied of that motor all it has is cam gears, ati balancer and a piss weak single plate clutch sitting next to it.

Biggest sus thing for me is the bog stock turbo's sitting right next to it on the floor like they've just been pulled off.

SargeRX8 Grand Master

SargeRX8

Posted
Posted

Just because a workshop built A 1000hp engine it doesnt mean that this is the one, the only way to proved this thing has all the fruit is to pull it down and have pictures of ALL the parts that are in it, for the sake of being able to proved everything is there you dont even need to replace anything except the head gasket.

Showing the engine sitting on a pallet like that means nothing to me or anyone who is actually looking to buy something like this to save themselves some money

As far as i'm concerned with seeing the picture thats been supplied of that motor all it has is cam gears, ati balancer and a piss weak single plate clutch sitting next to it.

Biggest sus thing for me is the bog stock turbo's sitting right next to it on the floor like they've just been pulled off.

I never said it was or wasn't I was just saying that you could call up the builder of the motor, inquire about when the motor was built, who it was built for, the parts used and what ever you need to ask. Most reputable builders are true and honest because they dedicate them selves to the products they build.

And my argument was not about not pulling apart the motor. Someone on previous pages asked him to chuck it on an engine dyno. I know the turbos sitting near the engine don't make it look too great but you can't expect the guy to have all the gear to get it thrown on a dyno to attempt to prove power. I was not arguing against pulling the motor apart for photos of piston tops, studs and looking into the head for head work, but more so the seller having the parts to obtain a engine dyno displaying the power output.

Its like when you go to inspect a car to buy. The seller can give you all the words in the world saying he has forged pistons, aftermarket rods, new bearings and what not and be asking just an average price. He can say he bought the car from bla bla person with the mods done and have no receipts. You can't ask the guy to strip his motor down just to show you it has the parts before you buy it. I know the situation is different but its the same thing. My brother has bought two fully built 13B motors. One had paper work, the other had nothing. Both motors were shown on a pallet. Both were built by reputable builders and sold on forums just like this(aus rotor). He contacted the engine builder to attempt to verify the original seller and the parts and work done on the motor. Both motors have done what they were told they were to do and are now with other people who bought them off him.

If you don't feel comfortable, you should not outlay your money. Even if someone showed me photos of the engine internals, I wouldn't buy it. A motor is something I would not buy without my own personal inspection. Each to their own. I'm not angry or anything I'm just putting shit out there lol.

And someone PM'd me offering 6k for a motor. I AM NOT THE SELLER lol.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      33 GTR Broken front wheel knuckle

      By GTSBoy · Posted

      That's probably OK. That's a face to face compression joint between two surfaces with the clamping load provided by those bolts. So.... it's unlikely that the bolts will end up feeling that load in shear, unless the clamping surfaces are not large enough, bolts not got enough tension on them, etc etc to prevent the two faces from moving wrt each other. Which... I would hope the designers have considered, seeing as it's probably one of the most important things the upright has to do apart from resist collapsing in its own right. But yes, it would definitely be worth asking them what their safety factor on that part of the design was. I tend to think that the casting, being a casting, is not necessarily the strongest bit of material in the world. It's about an inch square, and when you think about the loads that are being put into it, you have to wonder what safety factor the Nissan boys (and every other OEM engineer who has designed all the millions of other uprights that look essentially the same) used to account for defective casting, aging, severe impacts on the wheel, etc etc. 
    • R32 TT
      33 GTR Broken front wheel knuckle

      By R32 TT · Posted

      Those bolts would be orders of magnitude stronger that cast aluminium though.  And its mainly clamping force, not shear they are dealing with?
    • MBS206
      33 GTR Broken front wheel knuckle

      By MBS206 · Posted

      Except all that twisting force that is breaking a cast piece, appears to be going through 4 bolts in the picture Johnny posted of the BryPar one...
    • GTSBoy
      R34 auto to manual conversion help

      By GTSBoy · Posted

      The smart approach is to use the gearbox loom from the manual car. Makes it a lot easier - just plugs into the switches on the box and plugs into the main loom up near the fusebox. Then you only need to deal with bypassing the inhibit switch. The other approach requires you to use the wiring diagram to identify those wires by colour and location, perhaps even indulging in a little multimeter action to trace them end to end to make sure, and then.... you will have the answers you need. The R34 wiring diagram is available on-line (no, I do not have a link to it myself - I would have to do a search if I wasn't able to go to the copy I have at home).
    • Manur33
      R34 auto to manual conversion help

      By Manur33 · Posted

      Hi, i’m converted my r34 4dr auto to manual but need help with gearbox wiring. There are bunch of wires no idea which one for speedo drive, neutral, reverse can anyone help me. IMG_6860.mov
×
×
  • Create New...