Jump to content
SAU Community

Fully Built 1000Hp Rb26!

scr33m
 Share

Recommended Posts

dirty thimble Enthusiast

dirty thimble

Posted
Posted

rb26zed, on 03 June 2011 - 11:40 PM, said:

Sorry, I'm not interested in buying your engine, but I am curious as to how someone spends the time, effort and of course money to build a $22000, 1000hp engine, drives it 1500km then suddenly needs to sell it at a huge loss.

the guy i bought it off of got it built for his street gtr and decided to take it out to put it into another gtr for drag racing but decided he wanted an rb26/30 instead.

Still doesn't answer why you are selling it though after only just purchasing it.

hypo33 Contributor

hypo33

Posted
Posted

i dunno what fuss is about,, wish i had a spare 10k i would snap it up right away,, he does not need to give a reason for sale as u could just put it on a engine dyno before purchase if u are serious about buying this bargin and are skeptical about the sale. GL with your sale mate,, surprised its not sold,,, bloody tight arses.

  • 2 weeks later...
  • 2 weeks later...
SargeRX8 Grand Master

SargeRX8

Posted
Posted

8500....? ill give u 9 grand if u engine dyno it and prove its a healthy new motor capable of 1000hp...

pm me when your ready

That is a little hard for him to do. The motor was built by a reputable group(matouks, he is quite famous for his RB's). I'm sure if you call them up and ask about the motor they can help you out. I don't think scr33m has the turbo and other gear needed to demonstrate the 1000hp. Just because he bought the motor does not mean he has the turbo and other gear for it.

32rrr Collaborator

32rrr

Posted
Posted

That is a little hard for him to do. The motor was built by a reputable group(matouks, he is quite famous for his RB's). I'm sure if you call them up and ask about the motor they can help you out. I don't think scr33m has the turbo and other gear needed to demonstrate the 1000hp. Just because he bought the motor does not mean he has the turbo and other gear for it.

Just because a workshop built A 1000hp engine it doesnt mean that this is the one, the only way to proved this thing has all the fruit is to pull it down and have pictures of ALL the parts that are in it, for the sake of being able to proved everything is there you dont even need to replace anything except the head gasket.

Showing the engine sitting on a pallet like that means nothing to me or anyone who is actually looking to buy something like this to save themselves some money

As far as i'm concerned with seeing the picture thats been supplied of that motor all it has is cam gears, ati balancer and a piss weak single plate clutch sitting next to it.

Biggest sus thing for me is the bog stock turbo's sitting right next to it on the floor like they've just been pulled off.

SargeRX8 Grand Master

SargeRX8

Posted
Posted

Just because a workshop built A 1000hp engine it doesnt mean that this is the one, the only way to proved this thing has all the fruit is to pull it down and have pictures of ALL the parts that are in it, for the sake of being able to proved everything is there you dont even need to replace anything except the head gasket.

Showing the engine sitting on a pallet like that means nothing to me or anyone who is actually looking to buy something like this to save themselves some money

As far as i'm concerned with seeing the picture thats been supplied of that motor all it has is cam gears, ati balancer and a piss weak single plate clutch sitting next to it.

Biggest sus thing for me is the bog stock turbo's sitting right next to it on the floor like they've just been pulled off.

I never said it was or wasn't I was just saying that you could call up the builder of the motor, inquire about when the motor was built, who it was built for, the parts used and what ever you need to ask. Most reputable builders are true and honest because they dedicate them selves to the products they build.

And my argument was not about not pulling apart the motor. Someone on previous pages asked him to chuck it on an engine dyno. I know the turbos sitting near the engine don't make it look too great but you can't expect the guy to have all the gear to get it thrown on a dyno to attempt to prove power. I was not arguing against pulling the motor apart for photos of piston tops, studs and looking into the head for head work, but more so the seller having the parts to obtain a engine dyno displaying the power output.

Its like when you go to inspect a car to buy. The seller can give you all the words in the world saying he has forged pistons, aftermarket rods, new bearings and what not and be asking just an average price. He can say he bought the car from bla bla person with the mods done and have no receipts. You can't ask the guy to strip his motor down just to show you it has the parts before you buy it. I know the situation is different but its the same thing. My brother has bought two fully built 13B motors. One had paper work, the other had nothing. Both motors were shown on a pallet. Both were built by reputable builders and sold on forums just like this(aus rotor). He contacted the engine builder to attempt to verify the original seller and the parts and work done on the motor. Both motors have done what they were told they were to do and are now with other people who bought them off him.

If you don't feel comfortable, you should not outlay your money. Even if someone showed me photos of the engine internals, I wouldn't buy it. A motor is something I would not buy without my own personal inspection. Each to their own. I'm not angry or anything I'm just putting shit out there lol.

And someone PM'd me offering 6k for a motor. I AM NOT THE SELLER lol.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      My BMW E39 528i touring

      By PranK · Posted

      Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • GTSBoy
      My BMW E39 528i touring

      By GTSBoy · Posted

      Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • Duncan
      Neil's R33 Gts-t Build

      By Duncan · Posted

      OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • PranK
      My BMW E39 528i touring

      By PranK · Posted

      I forgot about my shiny new plates!
    • PranK
      My BMW E39 528i touring

      By PranK · Posted

      Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
×
×
  • Create New...