Jump to content
SAU Community

Recommended Posts

Hey can i please be helped with s13 NA Modification Tuning

URAS Type NS-S Exhuast system 60mm pipe with 100mm cannon.

HKS Step 1 cams....256 degrees and 10.5mm cam lift and 111 degrees valve timing ORRRR 264 degrees with 10.5mm cam lift and 111 degrees valve timing

HKS SUPER header II extractors?

How much power would i gain at the wheels? 45KW?

Edited by WanganMidnight
Link to comment
https://www.sau.com.au/forums/topic/360355-silvia-non-turbo-mods/
Share on other sites

I'd probably guess an overall 20-30rwkw gain... at the end of the day its a 2L motor....

and if you go too big on the exhaust u loose back pressure. loose too much of it and the car becomes even more sluggish in lower revs...

.......soo $2000 worth of mods and id gain 20KW? how is that possible?

lol... yeh mate... NATURALLY ASPIRATED....

in the turbo world, you can buy a t-piece boost controller for $20... take the boost up an extra 5-7psi and get 40kw+ ....

most people dont bother doing up small n/a engines because the gains arent worth the $$....

How about dropping a turbo motor in there or adding a turbo to the current motor (assuming ur not on ur p's) and then getting urself an extra 50-60kw+ for 2000

lol... yeh mate... NATURALLY ASPIRATED....

in the turbo world, you can buy a t-piece boost controller for $20... take the boost up an extra 5-7psi and get 40kw+ ....

most people dont bother doing up small n/a engines because the gains arent worth the $$....

How about dropping a turbo motor in there or adding a turbo to the current motor (assuming ur not on ur p's) and then getting urself an extra 50-60kw+ for 2000

I'm on my P's, how much would a SR20DET HALFCUT + id have to convert to manual cost.....do you know anyone reliable who sells them?

.......soo $2000 worth of mods and id gain 20KW? how is that possible?

because that's what we gain with those mods on an NA supra, so its totally not worth it.. keep it stock, or get a turbo..

but if you wanna do up the NA, go read up on some threads, i would be sure the same mods on RB engines would apply on your SR20, or ca18, which is it?

Hey can i please be helped with s13 NA Modification Tuning

URAS Type NS-S Exhuast system 60mm pipe with 100mm cannon.

HKS Step 1 cams....256 degrees and 10.5mm cam lift and 111 degrees valve timing ORRRR 264 degrees with 10.5mm cam lift and 111 degrees valve timing

HKS SUPER header II extractors?

How much power would i gain at the wheels? 45KW?

10-15rwkw, if you're lucky.

You're going to make a max of about 95rwkw if everything works well together and the ecu doesn't have a cry

If you go bigger cams, nistune it and up the red line plus tune (so another 1100) you might get another 5-10rwkw on top of that

So basically 3k to get you to about 105rwkw, 110rwkw if you have an s14de as the compressions a bit higher.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
    • I'd say it's a fair bet that the feed and return fluid lines will be in different enough spots that you would need to come up with a way to cut the originals short and adapt with new hard line adaption or braided teflon hoses or somesuch. But really, you have the car, you have the photos of the DMAX rack - you should be able to go out there and see for yourself whether they're in the same or different spots.
    • I've been doing some looking around and honestly was just considering throwing a new rack at it. I saw that the dmax silvia rack bolts up into the 33 with the silvia bushings but not sure if the high pressure lines will sit in the correct spot. I believe other version of the 33 rack are the same/similar to the racks that can be opened up without as much fuss so I assume the dmax rack would fit but any ideas?
    • I've never played with one, but I would expect that you are correct. That slot looks like it is intended to be used to unscrew the end, and the flats on the body would be better than grabbing it around the round bit with a pipe wrench. So, yeah, probably unscrews. You'll probably have to make a tool to drive in that slot.
×
×
  • Create New...