Jump to content
SAU Community

Recommended Posts

Its time to clear out the shed again,

all parts located in the hobart area, pick up only

most prices ono

can put pics up as needed

Wheels

(numer of rims)

bare rims, unless tyre size is writen

-17x9 Panasport G7, 114.3x5 pair only $600 (2)

-16x8 sportsmax 002 114.3x4/100x4, Kumho 205/50/16 tyres $1200 (4)

-17x8 +18 17x9 +35 mesh rims, 114.3x4/x5, 215/45r17 re050 tyres $1200 (4)

-15x7 +10 Roh gambles, 4x114.3 $500 (4)

-13x7 Rebals, 114.3x4 $600 (4)

-13x7 Spitfire mk2, 114.3x4, Yoko 032r semislicks 185/60r13 $500 (4)

-13x7 Spitfire mk2 114.3x4, pair only, 235/50r13 treaded tyres $300 (2)

-13x7 Spirfire mk2 108x4, 6 of, $500 (6)

-13x7 ssr mk 2? 110x4 one only $100 (1)

-14x7 Cheviot 5 slot, one only 114.5x5 $50 (1)

-13x8 Enkie, 108x5, pair only $300 (2)

-17x7 Avanket rh evolution, 4x100/4x114.3 215/45r17 pair only $200 (2)

-15x6 steel rims 114.4x4 $50 a pair (6)

Nissan parts

-s13 nismo/aero front bar, one crack (easy fix) no vents $500

-s13 rear mudflaps $40

-s13 stock taillights $80

-s13 front knuckles $100

-1600 front struts, coilovers sleeves welded on, no inserts $50

-240k sedan rear light panel $50

-s13 factory super woofer , unknown condition $150

-rb20 engines, 2 gtst, 2 gts4 all stipped $500

-s13 front calipers with pads $100

-bee*r rev limiter $250

-4-5 stud spacers, changes for 4x114.3 to 5x114.3 $250 a pair

-Ca20 r31 extractors $80

-200b front headlights, good for customs quad headlights on ke70's $100

Other parts

-wb panelvan front clip, complete with lights $500

-xe/d side skirts $100

-rx4 sedan rear taillights $100

-ce lancer front lip spoiler $100

-ce lancer rear bumper pods $50

-vr commodore gtrs style rear spoiler $100

-LH slr5000 style front spoiler $100

-253/308 chrome rocker covers new $100

-tinted ke70 taillights $50

-ae71 scuttle panel red $50

-audioline 2x200w amp $100

-guard roller broken thread $100

-old school racaro seat $150

-round nose mini front spoiler $150

-gemini panelvan panels $?

Aslo thinking of selling some of my c210/c211 skylines if anyone is keen, pm for more info.

Link to comment
https://www.sau.com.au/forums/topic/360391-shed-clean-up-sale/
Share on other sites

  • 2 weeks later...
  • 2 weeks later...

Wheels

(numer of rims)

bare rims, unless tyre size is writen

-17x9 Panasport G7, 114.3x5 pair only SOLD

-16x8 sportsmax 002 114.3x4/100x4, Kumho 205/50/16 tyres SOLD

-17x8 +18 17x9 +35 mesh rims, 114.3x4/x5, 215/45r17 re050 tyres $1200 (4) MAKE A OFFER

-15x7 +10 Roh gambles, 4x114.3 $500 (4)

-13x7 Rebals, 114.3x4 $600 (4)

-13x7 Spitfire mk2, 114.3x4, Yoko 032r semislicks 185/60r13 $500 (4)

-13x7 Spitfire mk2 114.3x4, pair only, 235/50r13 treaded tyres $300 (2)

-13x7 Spirfire mk2 108x4, 6 of, $500 (6)

-13x7 ssr mk 2? 110x4 one only $100 (1)

-14x7 Cheviot 5 slot, one only 114.5x5 FREE

-13x8 Enkie, 108x5, pair only $250 (2)

-17x7 Avanket rh evolution, 4x100/4x114.3 215/45r17 pair only $150 (2)

-15x6 steel rims 114.4x4 $50 a pair (6)

Nissan parts

-s13 nismo/aero front bar, one crack (easy fix) no vents SOLD

-s13 rear mudflaps $40

-s13 stock taillights $80

-s13 front knuckles $100

-1600 front struts, coilovers sleeves welded on, no inserts $50

-240k sedan rear light panel $50

-s13 factory super woofer , unknown condition $150

-rb20 engines, 2 gtst, 1 gts4 all stipped $500

-s13 front calipers with pads $100

-bee*r rev limiter SOLD

-4-5 stud spacers, changes from 4x114.3 to 5x114.3 $250 a pair

-Ca20 r31 extractors FREE

-200b front headlights, good for customs quad headlights on ke70's $100

Other parts

-wb panelvan front clip, complete with lights $500

-xe/d side skirts FREE

-rx4 sedan rear taillights FREE

-ce lancer front lip spoiler FREE

-ce lancer rear bumper pods FREE

-vr commodore gtrs style rear spoiler $100

-LH slr5000 style front spoiler $100

-253/308 chrome rocker covers new $100

-tinted ke70 taillights FREE

-ae71 scuttle panel red FREE

-audioline 2x200w amp $100

-guard roller broken thread SOLD

-old school racaro seat SOLD

-round nose mini front spoiler $150

-gemini panelvan panels $?

added this stuff

-14x7 -+0 centerlines 4x114.3 pair only $200

-ae71 g/box crossmeber $50

-vr4 galant suspension FREE

-1ggte polished turbo pipes FREE

-r31 auto brake pedal cut down for man conversion FREE

-r32 brake booster FREE

-rx4 door trims FREE

-vr4 galant inlet manifold FREE

-ta22 celica rear seat base FREE

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...