Jump to content
SAU Community

Recommended Posts

99% of the aftermarket cf bonnets are illegal. There is one Australian company that has met the ADR requirements... Can't remember the name unfortunatly...sorry!!!

Insurance will not cover them. You may also be liable if the bonnet causes personal injury. Eg hit a pedestrian

However, as they do look fantastic <<<<<see avatar...just make sure you have the original in case you get caught.

blits body kits www.blitsbodykits.com.au their about $740, and if you wont the CF look put some CF vinal on it. BTW i just brought one and they are well worth the money. futher more you can shove the ADR in the cops face when he tryes to ping you.

Blits bonnets are ONLY legal in QLD. in vic the certificate they will give you means nothing.

there have been a few threads about this in the past, pls search for them as i cbf/dont have time now :)

Not 'legal' but I drove around with a carbon bonnet for years... got pulled over a few times... got questioned about how close the exhaust was to the ground and how much tread I had on my tyres... but nobody ever mentioned the bonnet

mine didn't have any vents or holes though, was an exact replica of the standard bonnet just in carbon

The blitz ones looks kinda gay lol.

As for a aftermarket bonnet, it just depends on your luck on the day that you get pulled over. Some cops might care, some cops might not, some might know that it's illegal, some might not.

At the end of the day, they are illegal, it just a matter of time before you get caught with it, you might be lucky, you might be not lol. But then theres another saying, it's not illegal until you get caught xD

and let's face it, it takes about 15min to swap the stocker back on

just don't get the ones with all the vents... they're gay

And most won't have a water channel, which means water will drip straight into your engine bay lol

But yeah, wouldn't wanna keep swapping it, as defects do stay on records (as I've been told by VicRoads, or maybe it's not true as to what Ash said, one min they can say one thing and the next min is different lol)

Blits bonnets are ONLY legal in QLD. in vic the certificate they will give you means nothing.

there have been a few threads about this in the past, pls search for them as i cbf/dont have time now :)

I am going to have to look in to this, why would a ADR tho be illegal in one state and not anothre when ADR stands for Australian Desing Rule.

I thought only pure carbon fibre was illegal due to shattering like shards upon impact. Fibre glass with carbon fibre overlay is most commonly used item for aftermarket bonnets and doesn't seem to bother the law.

Never seen or heard of anyone getting done for bonnet but with insurance it's a different story I guess.

Even though my car came factory with pure carbon fibre bonnet, it's deemed legal in my case due to being a factory item and also the fact that it's color coded to the car :)

Yeah well spoke to just car insurance and apparently it doesn't void my insurance either if declare it. I think it's one of those greyed zones were people just push it to the side cos can't be bothered with all the work to declare it legal/illegal

I think with insurance, it will only void your insurance IF the bonnet was the cause of an accident, eg it flips and smashes your roof then flies off and smashes into the car behind lol

seen that happen to a civic on the western ring road bout year ago didn't hit anyone else which was lucky

No doubt those things happens... a lot. Heard heaps of stories about people having a aftermarket bonnet without bonnet pins lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • sold listed as a Tomei LSD 1.5 Way For 1998+ Nissan Skyline ER34 25GT RB25DE w/Open R200 https://www.ebay.com/itm/174006114594?campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=&mkrid=711-53200-19255-0&loc_physical_ms=108689&loc_interest_ms=&campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=71883f2ccc571356e0a757bc7adfdde2&mkrid=710-53481-19255-0&loc_physical_ms=108689&loc_interest_ms= it went in like butter all gears, alignment, back lash etc, rotation and clearances correct, and if rolling all rotates smooth and free when coasting down road , clutch in or out over 10 mph smooth... its the binding, clunking and jerking from a stop that is most concerning, also seems like its going to tear the tires off in 10 miles of normal road driving. 
    • What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...