Jump to content
SAU Community

Recommended Posts

2 weeks ago i purchased my 350z anniversary wheels , although they were just a little to plain for me in the standard alloy colour . so today i thought id pull out the spray gun and give them a more stealthy aggressive look. the paint i used was the factory black r34 GV1 from memory .much to my suprise they came out better then i expected , totally give the car a different look.

for anybody at home looking to do something similar, the process was pretty simple .

1. rough up existing paint with 400 gritt

2. clean with thinners

3. spray a dust coat with the base paint.followed by 3 firm coats

4.2-3 coats of clear

5. maybe even a bit of a cut and polish depending how fussy you are

overall the end result was worth the time , took about 1 hr per wheel , off and back on again. ill throw a final pick up tomorrow , bit too dark by the time i got inside :P

cheers , and comments or questions hit me up

post-32277-0-17504400-1302597436_thumb.jpg

post-32277-0-78745000-1302597656_thumb.jpg

post-32277-0-26764700-1302597665_thumb.jpg

post-32277-0-16068600-1302597676_thumb.jpg

post-32277-0-32547600-1302597777_thumb.jpg

Edited by sky017
Link to comment
https://www.sau.com.au/forums/topic/360681-bit-of-diy-painting-today/
Share on other sites

Arthur T3 - it was a pretty sunny day yesteday when i sprayed them, being acrylic it dries pretty quick too. but what i did was after id spray the clear , i gave it 15 . then rolled it back to the car , carefully put it back on . put the bolts on carefully , pretty easy considering they are a pretty wide hole . then just left them over night to dry completely . saves a bit of time so i can get the next wheel, off to prep. i was keen to get them done before the sun went down :P cheers

aahh of course, it was sunny..

i live in melbourne, we dont really get that here .

Ive been painting in the shed with the heater goin and still having trouble drying, ive resorted to doin a coat a day during the week and assemmbling the next weekend :(

aahh of course, it was sunny..

i live in melbourne, we dont really get that here .

Ive been painting in the shed with the heater goin and still having trouble drying, ive resorted to doin a coat a day during the week and assemmbling the next weekend :(

hehe poor you by the sounds of it. definitly hate drying process, i try to be a perfectionist at times , but damn sometimes i just want it done and back on the car, i sprayed my rear bar on a sunny day ,then bang raining! heres me out in the garage still spraying lol. only crap thing is it goes milky in the cold , never the less all goes away when you cut it bck :P

thanks for the positives guys , much appreciated

i do a few colour coats and a couple of clear, but havent cut it, could be why my finish isnt as good,what do u use?

Think i have a bottle of mequiers fine cut would that do it?

i must say it requires a fair bit of work in regards to cutting to get that high gloss finish . usually rub back from 1500 - 2000, then use a cutting compound. iv used this septone stuff i purchased from the car paint place, followed by a polish compound ,then some other detailing polish. all depends what your doing , but thats my process for body work , seams to work for me. by the way in saying that , its a must you use a power dril or a variable speed grinder with buffing wheel / foam pad attatched to really get that gloss to shine , using some cheap buffing wheel from kmart wont be sufficient enough.

<--- see my profile pic

did this on the old r33 years ago.

same technique, wet sand, but i also used some putty to smooth out the gutter rash etc so took me a full day with all the waiting and drying.

these wheels do look nice though

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
×
×
  • Create New...