Mx7 Clutch In R33 Box

[luvpsi]

hhey guys before i put my rb25det in the vl i had a standard rb30 manual (mx7) i had a 5 puk button clutch that i used for like 3000kms. seeing though the flywheel is the same size on both r33 box will this clutch work on the r33 box?

[SargeRX8]

Don't think so, the clutch is a little bigger on the vl. I almost bought a vl clutch but was told our cars are 240mm and the mx7 is 250mm or something. Then again the whole flywheel on an r33 is a flat surface so as long it's machined and the clutch cover fits the rb25det bellhousing and the starter motor teeth fit with no obstruction from the clutch cover I guess it could work...

Edited April 16, 2011 by SargeRX8

[luvpsi]

sorry not mx7 i meen the mf5 has a 9.5" flywheel the mx7 has a 10" flywheel i always get confused between the 2 so int hat sense it should fit aye?

[89CAL]

I have a 10" clutch on my R33. As long as its push type it should be right

[luvpsi]

i beleive its push type im unsure how to tell the difference but its not a 10" im putting on i said mx7 but i meant mf5 so it has the 9.5" clutch so it should fit due to the r33 being a 9.5" clutch