Jump to content
SAU Community

Billet Turbo- Hks Manifold And A Heap More Good Gear.


Recommended Posts

I'm back from overseas and I'm cleaning out the shed to fund my TD06 requirments.

Precision Turbo- Billet comp wheel, PT5557 570hp turbo. Less than 1500km old, some dyno runs and a couple of gymkhana events. This turbo is currently on my rb25/R32 (some may have seen the set up in action at the DEC gymkhana event last year). The car is currntly making 250rwkw with more in it. Dyno sheet and or ride can be arranged.

Turbo- $1000

Wastegate- $350

Stock manifold wastegate adapter- $250

Package- $1400

post-22624-0-63658400-1303209517_thumb.jpg

post-22624-0-03745500-1303209656_thumb.jpg

Nismo 260km/h dash for R32 GTR- 87k kms on the clock. As far as I know it suits early 32's. $250

post-22624-0-09109500-1303210041_thumb.jpg

Generic JJR oil cooler kit- Used condition, but everything is there. $200

post-22624-0-17411500-1303210246_thumb.jpg

Twin td05 kit to suit rb26. Used condition. Manifolds are very well made (japanese) with no cracks. Turbos are in ok condition, minimal shaft play and thrust play. Comes with dump pipes. $1000

post-22624-0-37925200-1303210396_thumb.jpg

post-22624-0-37834000-1303210554_thumb.jpg

Genuine N1 oil pump- new in box. $350

post-22624-0-84154100-1303210692_thumb.jpg

Turbosmart FPR-800 fuel pressure regulator- used but in good condition, includes some fittings. $200

post-22624-0-07321000-1303210929_thumb.jpg

Turbosmart bleed valve- used. cheap. $50

post-22624-0-22865100-1303211102_thumb.jpg

Turbosmart V port blow off valve- used. also cheap. $75

post-22624-0-29833500-1303211211_thumb.jpg

VH45/Q45 V8 90mm throttle body- used but good condition. has no tps but your rb20/25 s1 will bolt straight on. also has coolant temp idle adjustment (cool!). $250

post-22624-0-36248100-1303211370_thumb.jpg

RB Flywheel- used, no cracks. $100

post-22624-0-61651300-1303211497_thumb.jpg

SPEC clutch plate- used. $50

post-22624-0-88796100-1303211716_thumb.jpg

HKS GT 2835- needs a rebuild and the housings are good. $350

post-22624-0-33445800-1303211879_thumb.jpg

RB26 conrods- straight and undamaged. $120

post-22624-0-23462500-1303212017_thumb.jpg

HKS cast low mount exhaust manifold- is don is good, but has a crack along the divider inside... I have had a quote for repair (correctly) for $150 by a cast material welding specialist. Rare item $450

post-22624-0-65273500-1303212260_thumb.jpg

post-22624-0-93086100-1303212384_thumb.jpg

HKS square base wastegate- has bolts, valve seat and gasket. $350

post-22624-0-24185400-1303212568_thumb.jpg

Trust rb26 pod adapters- good condition, needs polishing. $100

post-22624-0-45518600-1303212724_thumb.jpg

Intercooler- generic JJR. $100

post-22624-0-84005700-1303212852_thumb.jpg

Package deals can be made, all shipping will be additional (don't ask for shipping prices unless your very keen) and all parts can be inspected/picked up from south Tasmania- Hobart Area.

PM me here or call/sms 

Cheers

Justin

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

When you mean stock manifold wastegate adaptor how do you make that work with a stock manifold? Im asuming its to suit a rb25 going by the pic?

Also the HKS manifold with the wastegate bolts up the same as a standard manifold? Like turbo and dump?

Adam

Edited by Ad's

When you mean stock manifold wastegate adaptor how do you make that work with a stock manifold? Im asuming its to suit a rb25 going by the pic?

Also the HKS manifold with the wastegate bolts up the same as a standard manifold? Like turbo and dump?

Adam

The adapter allows an external wastegate to be used with the stock manifold and a T3 turbo. Will work with rb20 or 25. I can assure you it works...

The HKS mani bolts up to the head like a stock manifold, however the turbo mounting position is different to standard. Why would you want to use stock turbo or dump with it?

I'm keen on the hks mani , the jjr oil cooler kit and possibly the hks 2835 Are you free this weekend mate? :D

I'm free all day/weekend. I've got a feeling I'm gonna get alot of intrest on the mani- can I bring it round to show you today?

Cheers

Justin

The adapter allows an external wastegate to be used with the stock manifold and a T3 turbo. Will work with rb20 or 25. I can assure you it works...

The HKS mani bolts up to the head like a stock manifold, however the turbo mounting position is different to standard. Why would you want to use stock turbo or dump with it?

I'm free all day/weekend. I've got a feeling I'm gonna get alot of intrest on the mani- can I bring it round to show you today?

Cheers

Justin

Sorry i ment to say bolt up to a aftermarket dump! Iv got a 3071 ready to go on so getting the turbo rotated wouldnt be a problem. Pm coming your way shortly.

Sorry mate , i'm a little on the busy side today , maybe tonight? (no promises) you still down kingo??

Hey Toff, I'm in moooonah at the mo... I can come to you?

Sorry i ment to say bolt up to a aftermarket dump! Iv got a 3071 ready to go on so getting the turbo rotated wouldnt be a problem. Pm coming your way shortly.

PM replied.

dont get a dirty truck turbo Justin. ;p

also one important bit of info is the HKS manifold T3 or T4?

ive still got thoes HPI mags next time your up this way.

Truck turbo's are awsome!!!! mmm might need to get a forklift motor for the truck turbo...

T4

You comming down to the SAU track day? if not what's the next event yalll attending? I'll pick em up when I see you there? Appreciated.

Cheers

Justin

Damm you & your low prices ill never sell my bov now :P

what size is the front mount?

Eassily solved by buying mine and sell both of them for more :P

standard- 600x300x76mm 3" outlets.

Hey Toff, I'm in moooonah at the mo... I can come to you?

PM replied.

Truck turbo's are awsome!!!! mmm might need to get a forklift motor for the truck turbo...

T4

You comming down to the SAU track day? if not what's the next event yalll attending? I'll pick em up when I see you there? Appreciated.

Cheers

Justin

Hmmmm. i dont think s13 people like there engines being called forklift engines. haha

no SAU track day. both my 32s fail at moving under there own steam.

Hey Toff, I'm in moooonah at the mo... I can come to you?

Cheers

Justin

Sorry mate , i was in moonah , my work sux atm because i don't know which one ill be at between every hour , tonights not looking good either sorry mate , no need to hold it for me or anything though , if it sells it's tuff luck for me :) , pm me your mobile mate , if your in moonah-ish tomorrow i'll try catch up around my lunch break :) cheerio

Truck turbo's are awsome!!!! mmm might need to get a forklift motor for the truck turbo...

T4

You comming down to the SAU track day? if not what's the next event yalll attending? I'll pick em up when I see you there? Appreciated.

Cheers

Justin

Hi, just to clarify - is the HKS manifold a T4 manifold for an RB25?

yes is T4 flange... most people just re-drill and tap them for t3- as i was going to do,,, there is heeeaps of material around the flange.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
×
×
  • Create New...