Jump to content
SAU Community

Recommended Posts

Okay so there's actually a couple of different parts to this question. I've attempted searching for the answers, but have been unsuccessful. I want to get into amateur racing as the title suggests. Questions;

In relation to my road legal R34 GTT.

1) what modifications need to be done to the car to make it fit for racing and following modifications, will it still be road legal?

2) what sort of licence do I need for this style of racing?

3) where do I go to register for this type of thing?

In relation to possibly purchasing a track car, thinking of some sort of evo/sti and looking at rallies.

1) is there any sort of Australian amateur rally scene/club? Can anyone provide details or a link.

2) where would I best be looking to purchase a track car? What are the rulings on stat and repairable write offs being used?

3) what sort of modifications need to be done to the car?

4) what sort of licence do I need?

5) what sort of cash would I be looking at spending on a project like this?

Cheers

Darren

Link to comment
https://www.sau.com.au/forums/topic/362494-amateur-racing/
Share on other sites

What sort of racing do you want to do?

Door to Door, Sprints, Hill climbs, Dirt rally, tarmac Rally?

All have differing needs/Regs

Also where are you located?

Anything with corners, dirt rally would be top of the shelf, then tarmac rally and then hill climbs.

Link to comment
https://www.sau.com.au/forums/topic/362494-amateur-racing/#findComment-5785126
Share on other sites

Well dirt stuff im no real expert on but Ill help where I can

You will need a Full CAMS approved roll cage (99% of the time makes the car un roadworthy)

Cams/FIA approved fixed back seat x2 (for the navigator aswel)

Harnesses

and Intercom system (like a Terratrip) http://www.terratrip.com/home.htm

Then depending on what Series you run in, you will have to meet any rules/regs/restrictions that they require.

See here for licencing info - http://www.cams.com.au/

Also contains all the rules/regs for most motorsport events around Aus.

There are a few dirt guys that float around this Forum, Im sure they will be able to help you out more.

Link to comment
https://www.sau.com.au/forums/topic/362494-amateur-racing/#findComment-5785144
Share on other sites

Anything with corners, dirt rally would be top of the shelf, then tarmac rally and then hill climbs.

my suggestion is get along to a few track days/sprints with your road car to start with.

where you are has alot to do with who's running events and whether its cams or aasa licenced. some track days at certain venues don't require any competition licence.

Link to comment
https://www.sau.com.au/forums/topic/362494-amateur-racing/#findComment-5785199
Share on other sites

Anything with corners, dirt rally would be top of the shelf, then tarmac rally and then hill climbs.

As the other poster said its likely that many forms would require a full cams spec cage and fixed seats - especially anything door to door so would rule out your road legal 34.

If you are looking to rally especially its probably better to get a second dedicated track car, that way if you bend it you dont wreck/disable your road car. Theres a few more hazards there than on a racetrack so your odds of a stack go up.

Oh and its probably cheapest to buy a car already set up even if it needs a little work. my105.com is a good place to start looking

Edited by gregor
Link to comment
https://www.sau.com.au/forums/topic/362494-amateur-racing/#findComment-5785215
Share on other sites

Okay so there's actually a couple of different parts to this question. I've attempted searching for the answers, but have been unsuccessful. I want to get into amateur racing as the title suggests. Questions;

In relation to my road legal R34 GTT.

1) what modifications need to be done to the car to make it fit for racing and following modifications, will it still be road legal?

2) what sort of licence do I need for this style of racing?

3) where do I go to register for this type of thing?

In relation to possibly purchasing a track car, thinking of some sort of evo/sti and looking at rallies.

1) is there any sort of Australian amateur rally scene/club? Can anyone provide details or a link.

2) where would I best be looking to purchase a track car? What are the rulings on stat and repairable write offs being used?

3) what sort of modifications need to be done to the car?

4) what sort of licence do I need?

5) what sort of cash would I be looking at spending on a project like this?

Cheers

Darren

First thing is to find a car club & go have a look.

http://cams.com.au/en/Development/Club_Zone/Club_Finder.aspx

Link to comment
https://www.sau.com.au/forums/topic/362494-amateur-racing/#findComment-5785344
Share on other sites

Good choice on the gravel stuff. I'll answer what I can.

In relation to possibly purchasing a track car, thinking of some sort of evo/sti and looking at rallies.

1) is there any sort of Australian amateur rally scene/club? Can anyone provide details or a link.

Yes, plenty of rally clubs in each state. Get onto the CAMS website or AMSAG website (the 2 main bodies who organise rallies in Oz) and there will be links to clubs in your area. The BMSC link above will be a great start - it's the most active gravel rally forum in Australia by far.

2) where would I best be looking to purchase a track car? What are the rulings on stat and repairable write offs being used?
my105 is a good place to look for cars, but many can be way overpriced. Not sure about stat write offs being used, but bear in mind rally cars will need to have some form of rego, and this can be very difficult if there is any question about the car's authenticity. Not impossible, but can be a major payne.
3) what sort of modifications need to be done to the car?

Basic safety stuff is the minimum spec, but you can do autocrosses, dirt sprints etc with a stock standard road car as long as it's in reasonably safe condition. Proper rallies will need rollover protection, under body protection and upgraded suspension to cope with the rough roads (stock height springs and good quality dampers are a good start) How fast do you want to go?

4) what sort of licence do I need?

CAMS L2S for dirt sprints, autocrosses etc. Rally licence for higher events (rallysprints, rallies). Have a search through the CAMS website for details on this, how to get them and how much it costs

5) what sort of cash would I be looking at spending on a project like this?

You can get a rally ready car from $5k upwards, but anything reliable and a bit fast is likely to cost $10k. If you want a reliable, quick AWD rally car, then budget $20-30k to start. To build any of the above you should triple the figures I've quoted. Again, depends how fast you want to go. Personal safety gear will probably cost about a grand to get going, although you can pick up stuff second hand for a fraction of that cost (not recommended - don't skimp out on safety gear)

I haven't put a million links in this post because I can't be arsed searching for them for you. I've put enough info there so that you can find it with a bit of searching. If you have specific questions, I'm more than happy to help out. If you're in SE QLD, come along to a dirt sprint and I'm happy to show you around (as will most competitors be)

You can do tarmac hillclimbs, track days etc. with a rally car and still have fun. The suspension settings won't be ideal, so you won't get the most performance out of the car but that shouldn't stop you from having a go. I've tracked my gravel rally Civic (stock B16a) and while it's 10 sec a lap alower than the fast guys at Lakeside, I still had an absolute ball. If I lowered it and tweaked the geometry, as well as learnt the track I'm sure there is a good 2-3 sec a lap in the car without having to change any components over. Still won't scare the big boys, but it punches well above its weight for a shopping trolley.

Link to comment
https://www.sau.com.au/forums/topic/362494-amateur-racing/#findComment-5785407
Share on other sites

If you wanted tarmac - door to door stuff - MRA is a good starting series.

however Id do the "join a club" with what events appeal to you then go from there

plenty of rally, tarmac, hillclimb, supersprint clubs out there

Link to comment
https://www.sau.com.au/forums/topic/362494-amateur-racing/#findComment-5785418
Share on other sites

and whats the verdict on previously written off cars being used for rally events? is there rules against it?

there's nothing in any rally regs about damaged/written off cars, but they have to be road registered, so the normal rules apply there...

Edited by hrd-hr30
Link to comment
https://www.sau.com.au/forums/topic/362494-amateur-racing/#findComment-5785423
Share on other sites

thanks for the wealth of info, gives me a few more specifics to google now. i don't wanna spend 30k on something, just wanna get something that has a little bit of kick and i can have a good time in, i've never rallied before in my life so i wanna be able to learn the ropes. found some basic WRX's, early 90's with no modifications for around 5 - 6k all under 200k on the clock, so i might look at playing with something like that.

cheers

darren

Link to comment
https://www.sau.com.au/forums/topic/362494-amateur-racing/#findComment-5785675
Share on other sites

The early Rexes are OK out of the box but will need a lot of $$ to make them competitive. I guess it all depends on what you want out of it. Might be better to consider a built FWD like a Civic / Corolla / Swift in PRC spec. These will most likely be quicker than a standard Rex, and be ready to do full rallies, whereas building a Rex might be a 10 year project by the time you get it finished.

Even a Hyundai Excel is a great starting point, as there is a series where you pit yourself against identical cars, and they can be very competitive. They're cheap to buy, and parts are available at your locak newsagent. you won't have any less fun in the Excel, will be as quick as some of the AWD's, and will learn a bucket load about car control. What it won't have is street cred, so if you can live with that, then the Excel is a perfect choice for a beginner.

If you show promise in the Excel, then you can move up to an AWD, and you will be competitive in that as well.

Some of the older AWD's come up for $10k or less for fully prepped cars (VR4, early Rex / Liberty, Familia etc). Some of these can be a very good thing, but like any older car you might be chasing a lot of reliability issues.

Remember the old saying - you can have cheap, fast or reliable. Pick any two.

Link to comment
https://www.sau.com.au/forums/topic/362494-amateur-racing/#findComment-5785767
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
    • The video for the servicing and fuel filter change can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44 One of the main jobs I wanted to do before the car officially went on the road, was to remove the awful looking blue silicone hoses. There's nothing wrong with having coloured silicone hoses, but I realise as I'm getting older I prefer monotone engine bays with a splash of colour on the engine cover(s). I cover this in a lot more detail in the Youtube video, so unfortunately there's limited photos of the process. The intercooler, upper radiator, boost vacuum and upper breather hoses were all changed to black silicone with mikalor clamps. The only blue left is a blanking cap at the back of the inlet manifold and the GReddy pulleys (which will be replaced for stock when the cambelt gets replaced) While the intercooler pipes were off I gave them a quick clean/polish too A before photo I do have a replacement air filter on its way. Fuse box covers were painted blue, they're now satin black Another job on the list while the bumper was off, is to add some mesh https://live.staticflickr.com/65535/54737966256_99b28bfa30_c.jpg[/img] I was hoping to use some thin wire to secure it, but it seems I've misplaced it and the wire I had was too thick to twist easily. I ended up using cable ties for the time being https://live.staticflickr.com/65535/54737131882_c2b7989dcc_c.jpg[/img] Was pleasant to see this https://live.staticflickr.com/65535/54737131627_8b2aab13b3_c.jpg[/img] The last thing to do was to fix the front grill and re-mesh that to match but I ran out of time The Youtube video can be seen here: https://www.youtube.com/watch?v=R4FsF6tgizE&t=23s
×
×
  • Create New...