Jump to content
SAU Community

Recommended Posts

Hi Guys,

About two weeks ago I started getting a problem where If I was stopped and was in or close to full lock and would accelerate left or right I could feel something wasn't right, it was like the front wheels were skipping or slipping and not making traction, some vibration like shuddering throiugh the steering wheel whilst this happened......faster speeds and easier corners were okay and straight line was no problem.

At first I thought it might have been cvboots as I read other advice on the forums.... I'd just bought a set of coilovers and decided to book it into Fulcrum as the problem gradually got worse and was happening without full lock and on longer corners, I could even feel it in reverse when parking the car when in the same full lock slight to moderate acceleration and that feeling mentioned above.

In last two weeks I've had both cvboots reconditioned, coilovers fitted and bushes replaced as these had also worn out. It felt on first inspection that the problem had gone away, last night I took the car out and was happy with the way everythig was going then went to test things again from stationary full lock turns and there it was again, not as bad as before but you could definately feel it. I'm no mechanic and I only know what I learn from reading mostly but from what I've gathered this sounds most likely that the front diff has packed it in. The other thing which is less likely is the ATTESSA playing up though I would've thought if this was the case it would be playing up outside of the full lock scenario too.

If anyone has experienced something like this before let me know. Whilst I'm getting a rebuild done the front diff will be an easy job to do, just wanting to get some advice if there's anything else these symptoms could be pointing too.

Cheers,

Adam

No I'm pretty certain it's front diff... My car is in the shop again getting a forged motor rebuild and new front and centre diffs. The problem was there before lowering, with driveshafts and suspension parts done it really only leaves the diffs as far as I can tell.

I'll know more in a couple weeks, I told the shop what was going on and hope to never experience it again, I've pushed the car at different times and never felt anything like it before, the handling has been exceptional up to that first experience a few weeks back... will post an update once the rebuild work is done.

Edited by CruisingFast

No I'm pretty certain it's front diff... My car is in the shop again getting a forged motor rebuild and new front and centre diffs. The problem was there before lowering, with driveshafts and suspension parts done it really only leaves the diffs as far as I can tell.

I'll know more in a couple weeks, I told the shop what was going on and hope to never experience it again, I've pushed the car at different times and never felt anything like it before, the handling has been exceptional up to that first experience a few weeks back... will post an update once the rebuild work is done.

You don't have a centre diff. Are they rebuilding your transfer box and if so what bits are they replacing or upgrading?

Clutches in the transfer case are slipping due to the camber of the road and other things. No biggy, my 32 hasn't done it for ages and has been running sweet.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...