Jump to content
SAU Community

Recommended Posts

LOL i would have some super problems if they were hahahahaha nah one of them is probs leaking i think but there all pritty dry and brittle ... im a bit finiky now that im learning more "2nd year shit kicker" I dont need all the individual lengths just a rough over all ... i thought most vac lines would have roughlhy the same size diamiter ? might have to do some more investigating .... bugger manufacturer ill just find some kool colours and cut it properly

Mate best bet is to pull them all off take them to a hose shop and go i need one of each :)

Yeah thats probs what ill end up doing ..... got mate up road who stoks heaps of that stuff .... was just hopeing that someone might know so i could avoid having to go back and fourth (doing massive service in one day and pre bulking parts lol)

I did all mine on the R33 but the R34 engine is probably bit different. I used mostly generic hoses straight and right angle sections - there is also one 135 degree section. don't forget the water line joins for the turbo feed line at the back of the head (if the R34 has that one). That is normally the first to leak - and the heater hoses and 4-way join at the bottom rear of the block under the intake manifold.

All-in-all....good luck. I'm glad I did all mine at once in the end.

You'll want to use genuine heater hoses (4 of them on the R33). These are intricately shaped and almost impossible to replicate with regular hose without kinking.

Edited by simpletool

When I did my greddy copy plenum I replaced all my vacuum lines with blue turbosmart ones.

Got a pack of 4mm, 5mm and 6mm which was good to replace all the vac lines. They come in black if you want to keep it looking stock

Yeah just from autobarn but there $60 a roll from there and you only get 3m

Try

http://www.tweakit.net/shop/index.php?cPath=57_452_464&osCsid=68u503ejfk37sfmm2m276p9qd2

I'm pretty sure it was 4mm, 5mm and 6mm but it may have been 3mm instead of 4mm

Yeah the qld section has been a bit dead lately. Haven't heard from many of the guys since they got back from airlie. Think next time we will organize it a bit better lol

I should have gone and scouted some good spots for photos, rookie mistake lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...