Jump to content
SAU Community

Recommended Posts

LOL i would have some super problems if they were hahahahaha nah one of them is probs leaking i think but there all pritty dry and brittle ... im a bit finiky now that im learning more "2nd year shit kicker" I dont need all the individual lengths just a rough over all ... i thought most vac lines would have roughlhy the same size diamiter ? might have to do some more investigating .... bugger manufacturer ill just find some kool colours and cut it properly

Mate best bet is to pull them all off take them to a hose shop and go i need one of each :)

Yeah thats probs what ill end up doing ..... got mate up road who stoks heaps of that stuff .... was just hopeing that someone might know so i could avoid having to go back and fourth (doing massive service in one day and pre bulking parts lol)

I did all mine on the R33 but the R34 engine is probably bit different. I used mostly generic hoses straight and right angle sections - there is also one 135 degree section. don't forget the water line joins for the turbo feed line at the back of the head (if the R34 has that one). That is normally the first to leak - and the heater hoses and 4-way join at the bottom rear of the block under the intake manifold.

All-in-all....good luck. I'm glad I did all mine at once in the end.

You'll want to use genuine heater hoses (4 of them on the R33). These are intricately shaped and almost impossible to replicate with regular hose without kinking.

Edited by simpletool

When I did my greddy copy plenum I replaced all my vacuum lines with blue turbosmart ones.

Got a pack of 4mm, 5mm and 6mm which was good to replace all the vac lines. They come in black if you want to keep it looking stock

Yeah just from autobarn but there $60 a roll from there and you only get 3m

Try

http://www.tweakit.net/shop/index.php?cPath=57_452_464&osCsid=68u503ejfk37sfmm2m276p9qd2

I'm pretty sure it was 4mm, 5mm and 6mm but it may have been 3mm instead of 4mm

Yeah the qld section has been a bit dead lately. Haven't heard from many of the guys since they got back from airlie. Think next time we will organize it a bit better lol

I should have gone and scouted some good spots for photos, rookie mistake lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...