Jump to content
SAU Community

Recommended Posts

I have just been thinking recently about the age and gender of skyline drivers. Are skylines seen by the general public to be "P plater" cars?

Is there a stereo type often associated with skylines? e.g hoons, street racers?

Personally I consider myself to be a mature, sensible and considerate driver. I drive a R32 GTST which is completely standard besides an exhaust so its not my aim to stand out from the crowd as i'm sure is the case with many others on these forums.

What are your thoughts?

Link to comment
https://www.sau.com.au/forums/topic/363916-skyline-drivers/
Share on other sites

  • Replies 81
  • Created
  • Last Reply

Top Posters In This Topic

i think alot of us fall into the same category (myself included). minimal, or subtle mods seem quite common. But that wont stop people from developing an opinion based on the badge on the car.

I too suffer from this tho......as every time i see a V8 commondoor...i straight away assume bogan (although my 55 yr old mum drives one).

as for the P plater car reference. this is about the only place where it seems true...im not sure why so many kids strive to have a non turbo skyline on their P plates, there are so many cheaper fast and more fuel efficient options. are they really just getting their licenses and going out thinking "fark yeah ima go get me a SKYLINE!"??

Link to comment
https://www.sau.com.au/forums/topic/363916-skyline-drivers/#findComment-5806957
Share on other sites

as for the P plater car reference. this is about the only place where it seems true...im not sure why so many kids strive to have a non turbo skyline on their P plates, there are so many cheaper fast and more fuel efficient options. are they really just getting their licenses and going out thinking "fark yeah ima go get me a SKYLINE!"??

I'm on my L's atm (17) and I got my 25GT Coupe a few weeks ago, I brought it simply because I love the look of them, it doesn't worry me that it's a "slug" or a Magna can beat me lolol, but I'm sure it matters to heaps of people (So yes you are right, but performance didn't even cross my mind), hence why they had to introduce P restrictions, as too many inexperienced idiots wanted a fully sick turbocharged car and killed themselves. :ninja:

Link to comment
https://www.sau.com.au/forums/topic/363916-skyline-drivers/#findComment-5807251
Share on other sites

man i wish i could have imagined buying a 34 before i finished school....mind you they didn't even exist then....lol.

obviously if you really like the look of the car, and you can justify spending that amount of folding cash on your P's, then grats man :) enjoy.

Link to comment
https://www.sau.com.au/forums/topic/363916-skyline-drivers/#findComment-5807463
Share on other sites

Im a 17 y.o p plater with a non turbo r32

i have always liked the look of the r32 and when one came up cheap at the auctions i jumped at it with both hands haha

the fact that i paid less then my best mate who bought a 1995 corolla makes me pretty happy.

i had done my research and i knew its not fast but i still love the look and feel of it :)

so its not always the case of a kid getting there p's and thinking I NEED A SKYLINE BECAUSE THERE HELL FAST.

Link to comment
https://www.sau.com.au/forums/topic/363916-skyline-drivers/#findComment-5808449
Share on other sites

I can see why the P-platers want them. They are great looking cars! Obviously p platers cant drive anything quick these days, so why not drive something with good looks. Im sure a non turbo skyline would be much the same as a 6 cyl commodore power wise in a straight line (which most of us grew up driving) but they shit on them in handling and breaking. If i was 17 all over again, i would probably do the same.

Link to comment
https://www.sau.com.au/forums/topic/363916-skyline-drivers/#findComment-5808880
Share on other sites

18, male, P plater, but have driven powerful cars since I was 12.

The generalization that mainly P platers drive skylines is disturbing, I see so many people around 20-30 driving some wicked Lines.

True that mate, to be honest i hardly see any p plate lines up here (central coast, Newcastle)

I never was a skyline fan until i bought my 33 gtst off a mate, at $4000 i couldnt resist! All i can think now is that i would way prefer to be driving any sort of non turbo skyline than a commodore or falcon etc that most p platers have to resort to.

Link to comment
https://www.sau.com.au/forums/topic/363916-skyline-drivers/#findComment-5809054
Share on other sites

True that mate, to be honest i hardly see any p plate lines up here (central coast, Newcastle)

I never was a skyline fan until i bought my 33 gtst off a mate, at $4000 i couldnt resist! All i can think now is that i would way prefer to be driving any sort of non turbo skyline than a commodore or falcon etc that most p platers have to resort to.

There's quite a few P plate liners over here in Perth, we don't have those shabby laws, there's too many P platers driving around in hotted up V8 commodores, they get really angry with the Skline drivers to be honest, we always beat them... Legally whistling.gif.

I was always a commodore fan until my friend bought his Skyline, then since then I have bought one and love it to pieces. Loved the clutch into too many pieces though.

Link to comment
https://www.sau.com.au/forums/topic/363916-skyline-drivers/#findComment-5809113
Share on other sites

haha yeah, those commy boys get the shits when a 6 nails em. I have always driven commodores, and LOVED my ss. Not ragging on ss commodores at all, cause they can be bloody awesome cars, but my skyline SHITS on it performance wise. I couldnt believe just how well it handled when i bought it.. i always say its a go kart with an rb25 in it haha

Link to comment
https://www.sau.com.au/forums/topic/363916-skyline-drivers/#findComment-5809161
Share on other sites

I'm 20 and male.

There is a stigma with P-platers and Skylines (i'd like to blame fast and furious). Unfortunately for myself, by a matter of 6 weeks, had to comply with the new P-plate laws that were introduced in Qld on July 1st 2007 (I got my license in the August)

I'd always wanted a skyline, from as early as I could remember. I decided not to get one once I could only get a non-turbo. Since there was not a huge market for N/A skylines previously, all available ones were snapped up straight away and then put back up for sale at a ridiculously inflated price.

So in the end I just waited until I received an open license and bought an R32 GTS-T and now a 350Z aswell. Life is sweet.

Link to comment
https://www.sau.com.au/forums/topic/363916-skyline-drivers/#findComment-5809598
Share on other sites

I'm 62 and male.

Over the years...

2 or more of the following...

8x NISSAN - 1600, 180B, 240K, R31 Silhouette, Maxima G, R33 GT-R, R34 GT-R, R34 GT-R V-Spec II

2x ALFA ROMEO - Alfetta GTV, 164Q

4x BMW - E36 320i, E39 523i, E46 328Ci, E39 530i Individual

Link to comment
https://www.sau.com.au/forums/topic/363916-skyline-drivers/#findComment-5809880
Share on other sites

I'm 62 and male.

Over the years...

2 or more of the following...

8x NISSAN - 1600, 180B, 240K, R31 Silhouette, Maxima G, R33 GT-R, R34 GT-R, R34 GT-R V-Spec II

2x ALFA ROMEO - Alfetta GTV, 164Q

4x BMW - E36 320i, E39 523i, E46 328Ci, E39 530i Individual

That's one heck of a list of car owned, Terry. :thumbsup: I can't see myself owning that much cars any time soon, as I love my V35 coupe too much. I plan to keep it for as long as humanly possible and do it up slowly. :) (By the way, I saw your posts on preludeaustralia forum the other day. :P ).

I am 26 years old. I came to Australia in 2006 and working full time now. I saved up as much as I can when I got my full time job back in 2008, and went out and bought my first car, 2004 Nissan Skyline V35 coupe.

The reason being I just fell in love with it on first sight. I admit I don't know anything about a V35 before that. Although it's not as common as the R-series, I still get bad rep sometimes from your common haters. Back in the days, all I thought about owning were R34 GT-T coupe, S15 (Nissan), Evo (Mitsubishi) or a WRX, Liberty (Subaru). Movies and books also affected my decision back in my childhood in Burma. Also, my first car in Burma for 6 months before I came to Australia was a 1989 Toyota Supra (N/A) that my dad bought me. :)

Anyway, I don't care about all the bad stigma associating with a Skyline brand. I don't have time for that. All I care about is I want to enjoy it for myself (Even though it only comes out on the weekends) and with my friends. I also learnt alot after that and got alot of helpful friends (On and off SAU).

Concerning P-plate issue, I would agree on banning some of them (Turbo, V6) as performance cars. Also, there's nothing wrong with buying R-series N/A for starter, as long as not many turns out as actual hoons. :P

All in all, I love my Skyline. :worship:

Edited by VNS 24
Link to comment
https://www.sau.com.au/forums/topic/363916-skyline-drivers/#findComment-5809954
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For once a good news  It needed to be adjusted by that one nut and it is ok  At least something was easy But thank you very much for help. But a small issue is now(gearbox) that when the car is stationary you can hear "clinking" from gearbox so some of the bearing is 100% not that happy... It goes away once you push clutch so it is 100% gearbox. Just if you know...what that bearing could be? It sounding like "spun bearing" but it is louder.
    • Yeah, that's fine**. But the numbers you came up with are just wrong. Try it for yourself. Put in any voltage from the possible range and see what result you get. You get nonsense. ** When I say "fine", I mean, it's still shit. The very simple linear formula (slope & intercept) is shit for a sensor with a non-linear response. This is the curve, from your data above. Look at the CURVE! It's only really linear between about 30 and 90 °C. And if you used only that range to define a curve, it would be great. But you would go more and more wrong as you went to higher temps. And that is why the slope & intercept found when you use 50 and 150 as the end points is so bad halfway between those points. The real curve is a long way below the linear curve which just zips straight between the end points, like this one. You could probably use the same slope and a lower intercept, to move that straight line down, and spread the error out. But you would 5-10°C off in a lot of places. You'd need to say what temperature range you really wanted to be most right - say, 100 to 130, and plop the line closest to teh real curve in that region, which would make it quite wrong down at the lower temperatures. Let me just say that HPTuners are not being realistic in only allowing for a simple linear curve. 
    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
×
×
  • Create New...