Jump to content
SAU Community

Recommended Posts

... V6 and I believe it is stock.

Thanks.

:spank: r34's have an inline six engine stock.

And yes, you could be damaging your engine by driving it with a heavy vibration.You most likely have a misfiring cylinder.

Replace the spark plugs, if that doesn't fix it, take it to a mechanic.

  • 2 weeks later...

:spank: r34's have an inline six engine stock.

And yes, you could be damaging your engine by driving it with a heavy vibration.You most likely have a misfiring cylinder.

Replace the spark plugs, if that doesn't fix it, take it to a mechanic.

Thanks for actually helping and only mildly ridiculing me.

Clearly I haven't the slightest clue of what i'm talking about.

Didn't know that six cylinders could be configured in a straight line or V shape (duh).

End of story I took it to the a mechanic,

It had contaminted fuel. (Possibly because it was sitting there doing nothing for 6 months before I bought it).

And was misfiring.

They drained and replaced the fuel, replaced the fuel filter and also replaced the spark plugs.

Thanks.

Yeah thanks, the car is fine now.

It might just be in my head but i still feel there is a very slight vibration and a minor loss in performance (maybe 5 to 10%).

Although it's difficult to compare to what is was first like because I can't remember. heh.

Performance should be much better....

Does it sound like a subaru? if so you proberly still have a probelm.

I suggest creating a new post in the maintanence section next time to advoid the ridicule :P

"End of story I took it to the a mechanic,

It had contaminted fuel. (Possibly because it was sitting there doing nothing for 6 months before I bought it).

And was misfiring.

They drained and replaced the fuel, replaced the fuel filter and also replaced the spark plugs."

-----------------

Hey I'm having the same problem, especially when first starting the car, on full steering lock, and in reverse.

which mechanic did you take it to? (whereabouts are you located even?)

are the vibrations still there?

and how much did it cost you to get it fixed?

thanks mate.

I'm not very good at taking cars to bits; But i'd like to help by telling my experience.

I had an NA 34 and i had terrible problems with its "coil packs"

If:

*you're getting that little yellow "engine malfunction" indicator on the dash

and

* you have already but in 6 brand new spark plugs;

and you are still getting misfiring; it could be the coil packs.

Bad news: a pack of 6 Splitfires (best option) off ebay will set you back around 450 bucks.

Good news (sort of) i have my used (but still working) Nissan coil packs for my car which id sell individually if thats what you'd like.

Performance should be much better....

Does it sound like a subaru? if so you proberly still have a probelm.

I suggest creating a new post in the maintanence section next time to advoid the ridicule :P

Well the performance is 40x better than when it had vibration but probably on par with just before the vibration started.

The car remains very quiet and is still running well.

Hey I'm having the same problem, especially when first starting the car, on full steering lock, and in reverse.

which mechanic did you take it to? (whereabouts are you located even?)

are the vibrations still there?

and how much did it cost you to get it fixed?

thanks mate.

Hi, I am in Melbourne,

Took it to Sabbadin Automotive,

I no longer have any vibrations,

Cost me $500.

I think they got some second hand coil packs for like $80 to save me some money.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've been building a 26/30 for a few years now. I've had the head built with all the good stuff. I had a 32 gtr but blew it up and yes its all going into a vl but im looking for some advice from some RB nuts on pros and cons on putting a 26 head on a 30 bottom end is it worth it Works are as follows Head -Extensive porting 1mm oversized supertech valves Supertech double springs Supertech valve guides Supertech titanium retainers Tomei solid lifters Tomei 270 x 10.25 cams Head drain Bottom end series 2 rb30 block Cp ceramic coated pistons Eagle rods Romac balancer Oil restrictions  O ringed blah blah spent a fortune And will get a girdle because the 30s arent used to handling that much rpm Nitto billet oil pump Hypertune plenum 6boost mani Refurbed astra pump thats the cover for it in the boot I did have a precision 6262 but sold it because drag car life. Currently building the ass end full 4 link floater rear end with a 2 speed  But the dilemma i have is my mate rekens I should just stick with the 30 head for reliability. Has any one had any issues with mounting the 26 head ie compression blowing gaskets etc. Just looking for some advice from people who have gone down this route. Here's some photos. Blew the oil pump in the gtr and decided to rip the motor out at the time and do a full build only to find it had been a repairable write off so went down this path.     
    • I've been building a 26/30 for a few years now. I've had the head built with all the good stuff. I had a 32 gtr but blew it up and yes its all going into a vl but im looking for some advice from some RB nuts on pros and cons on putting a 26 head on a 30 bottom end is it worth it Works are as follows Head -Extensive porting 1mm oversized supertech valves Supertech double springs Supertech valve guides Supertech titanium retainers Tomei solid lifters Tomei 270 x 10.25 cams Head drain Bottom end series 2 rb30 block Cp ceramic coated pistons Eagle rods Romac balancer Oil restrictions  O ringed blah blah spent a fortune And will get a girdle because the 30s arent used to handling that much rpm Nitto billet oil pump Hypertune plenum 6boost mani I did have a precision 6262 but sold it because drag car life. Currently building the ass end full 4 link floater rear end with a 2 speed  But the dilemma i have is my mate rekens I should just stick with the 30 head for reliability. Has any one had any issues with mounting the 26 head ie compression blowing gaskets etc. Just looking for some advice from people who have gone down this route. Here's some photos. Blew the oil pump in the gtr and decided to rip the motor out at the time and do a full build only to find it had been a repairable write off so went down this path.     
    • lol no cats running str pipes … might put the high flow back on but I suspect it might effect my ignition timing a bit. 
    • That looks a bit like yellowing to me. If the rear bar was looking like that from rich idle, I'd ask the question, do you have a catalytic converter fitted, and fully working?
    • Oh yeah gets really bad down here. I’ll have to upgrade the heater and wind screen wipers as well for optimal performance.
×
×
  • Create New...