Jump to content
SAU Community

Recommended Posts

Righto lads!

Stagea Cruise on the Sunday 19th June 2011. Meet from 9.30am for 10am departure. Meet points (yep, theres two) to be advised and route to be advised on the day. However, I can telly ou that I will have 2 meet points organised: one to cater for the southies, and one to cater for the northies. Both groups will meet at a central (close to city) location for half hour stop for photos, and handout of directions.

We got 20 cars for the last cruise ... but the previous record from over 2 years ago is 25!!! Lets try to get 30 stags out for this. Put this date into your diary!

Please indicate if you will be coming, so I can get messages out for the meeting point and rough route for cruise.

:thumbsup:

Robbie, I'll PM you to give me a hand with the southern group and I'll tackle the northern group until we meet up. ;)

Sorry bad weekend for me. I will either have a new son or daughter due then. I'm hoping I can take the stag for a late night high speed run to the hospital when its due.

Sorry Rubes but I'm also in this boat!

Sorry bad weekend for me. I will either have a new son or daughter due then. I'm hoping I can take the stag for a late night high speed run to the hospital when its due.

Got a little girl coming somewhere between 10th-20th.

These Stags are a really fertile vehicle arn't they!

Hey ducati what hospital you going to? Would be spun out if it was the North Eastern!

Got a little girl coming somewhere between 10th-20th.

These Stags are a really fertile vehicle arn't they!

Hey ducati what hospital you going to? Would be spun out if it was the North Eastern!

It would be spun out. We just had our refresher there last night. Was really good experience the first time there. Hopefully we beet you to the balcony room :nyaanyaa:

Sorry to turn this into a thread about where we are having babies ruby :thumbsup:

vote for thread name change to " who's keen to have/make babies on june 19th??":thumbsup:

Ha ha we must be a bit out , Rose not due till 20th of aug oh well , any way not avalible on 20th june ethier i reckon date change is in order! probs best to put it up to poll like we have the last couple of times to ensure best turn out instead of one set date.:thumbsup:

Your AFM probs all sorted roo ?

Ha ha we must be a bit out , Rose not due till 20th of aug oh well , any way not avalible on 20th june ethier i reckon date change is in order! probs best to put it up to poll like we have the last couple of times to ensure best turn out instead of one set date.:thumbsup:

Your AFM probs all sorted roo ?

Bugger ... crap ... f**k ... shit ... dammit ... :P

Alright, disregard this thread. I'll kickstart another with a poll for you difficult bastards! :laugh:

Yeah, AFM issues sorted. Stagea was back on the dyno yesterday for a retune ... ended up very happy with 252.6rwkw @ 16psi (rwd dyno). Front shaft is back in now. Stagea is very different now with good oomph and great delivery of power.

:thumbsup:

strewth thats high for only 16psi not bad at all :thumbsup: i got just over 232 rwd on 18psi through the auto 219 awd , hmmm cams and 30 bottom end next :whistling: got to stop spending money on the stag though got to finish the 180sx e85 beast :devil:

Dont know when my stagea will be back on road. along with the bottom end problem (ringlands) she got vandalized early this morning, graffiti in a variety of areas.

thats no good tangles, you really are having terrible luck at the moment

Dont know when my stagea will be back on road. along with the bottom end problem (ringlands) she got vandalized early this morning, graffiti in a variety of areas.

Did the vandal put something in your fuel to cause the 5th cyl to fail

strewth thats high for only 16psi not bad at all :thumbsup: i got just over 232 rwd on 18psi through the auto 219 awd , hmmm cams and 30 bottom end next :whistling: got to stop spending money on the stag though got to finish the 180sx e85 beast :devil:

Yeah I was happy. Taking my time and making sure I had the right supporting mods in place paid off for slightly bigger numbers. You going to the SAU-SA club dyno day next sunday? My stagea will be ont he rollers to see if she can repeat her 250+ dyno run.

Dont know when my stagea will be back on road. along with the bottom end problem (ringlands) she got vandalized early this morning, graffiti in a variety of areas.

That sucks big time Brendan. f**king low life bastards. What do you mean by "vandalised", just graffiti, or dents and scratches etc too. PM me if you want.

:thumbsup:

Yeah I was happy. Taking my time and making sure I had the right supporting mods in place paid off for slightly bigger numbers. You going to the SAU-SA club dyno day next sunday? My stagea will be ont he rollers to see if she can repeat her 250+ dyno run.

might pop my head in for a look see how you and big fella are doing but not that into dyno days , hi stall will be in by next weekend so that will kill my dyno numbers even more due to converter slip and not locking up fully on the rollers had same trouble with the vlt, but the stag should launch hard as, make good boost off foot brake :thumbsup: fun for private roads. Good luck with the numbers on the weekend guys if i dont catch up

cheers jase

  • 2 weeks later...

Im going to Kadina on the Sunday in the GTR for the car show. There is a huge turn out of SAU going from Adelaide this year. You should enter the M35 in would be next to Rubys stag. I usually have my M35 in the shows but this time I want to go in the GTR. Have a look in the SA members section.

P.S See you Sunday :action-smiley-069:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
×
×
  • Create New...