Jump to content
SAU Community

Recommended Posts

Basic mods will be enough to get you started sliding like cooler exhuast , some suspension work such as coilovers and a diff shim if you diff is in really bad nick. To get started you will be fine with the power you have at the moment as you get better if you decide to stick with it slowly add more mods to accommodate for your increase in ability when you start to feel your car is holding you back.

For example when you get to the stage you want to be sliding corners in third gear and notice the car might struggle to do it from lack of power you might add want to add some power but yeah as other said just go out see what the car can do and then tweak it for the next time theres no need to begin with a full powerful d1 drift car.

A friend of mine regularly drifts his s14 at winton with a welded diff, coilovers, front mount and exhaust.

Stock power does him fine and car is reliable.

Stick with the bare minimum expenditure, and give it a go to see if you like it.

As an example....

Diff - Free if you can find a friend with a welder.

Coilovers - second hand ones can be had for approx 600

Exhaust - not essential second hand about 150

Front mount - not essential but average 300

Entry fee - 180

Aasa licence per drift day - 50

Tyres - 50-100 per tyre etc

Removing the Hicas by getting a Hicas Lock bar also really helps for drifting.. They go for around $100-150...

And as most of the people are saying the handling mods are more important than just making high power, Without the handling mods your car wont drift smoothly..

I would say go for

1] Hicas Lock Bar

2] Adjustable Coilovers

3] Whitleline Rear Sway bar

And 200kw is good enough to start drifting with, You should learn to control the car before giving it more power..

Power is bad. Most of the time people spin out when trying to drift its because they put down to much power! If you really are suffering from a lack of power then go the cheap option and whack some horrible, skinny tyres on the rear.

As for other mods get a 2-way diff for sure. I'd get coilovers too if you can afford them. Mine doesn't have coilovers and whilst I can kick it out one way and maintain some control, trying to link my drifts up in my yacht up is damn near impossible with stock suspension. It just snaps back so damn hard. Maybe I just suck at drifting.

iv got a 33 now and all it has is a welded diff, compressed springs, fmic, boost controller and mate this thing slides really good. i can can the 33 out better than my old 180sx which had 245kw. learn how to drift in a stock car then if u want power do it later.

so i would say get a fmic, diff and coilovers and ull be fine..

iv got a 33 now and all it has is a welded diff, compressed springs, fmic, boost controller and mate this thing slides really good. i can can the 33 out better than my old 180sx which had 245kw. learn how to drift in a stock car then if u want power do it later.

so i would say get a fmic, diff and coilovers and ull be fine..

lol do you own that yellow one? or that green (or was it orange)? the 2 skylines are like 3 houses away from each other

I'm suprised no one has mentioned a decent seat, it can go a long way and you won't need to worry about your seating position constantly while drifting.

I'd be doing minimal mods at first, consisting of:

Coilovers/shock+spring combo

A decent seat, fixed back will hold alot better obviously

Some form of diff, lockers are very predictable and easy to slide with.

That's the bare essentials, it's better to learn with "not enough" power than too much, it'll teach you throttle control and be pretty forgiving when you slip up.

When you feel you've mastered the car in it's current form (i.e power and lock) then run out and get some inner/outer tie rods (or knuckles) and start bolting some other parts on.

Most of all, have fun with it :thumbsup:

Edited by Run-It-Hard

Absolutely. All the stuff you have can be installed with help on the forums. Don't spend any more cash except on a tune after you install all that good stuff. Then get out and practice.

Bogans have been drifting for many years. I reckon you have to be taught. I am sure people here will offer to do so at the special days.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...