Jump to content
SAU Community

Recommended Posts

  • Replies 3.6k
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Cheap wheels are sometimes fine for posing around on the street, however if you race on them, be prepared to possibly die or stuff it in the wall.

Having said that the number of fakes I see on the dyno that are basically buckled square from hitting tiny ruts in the road daily driving etc is frightening. There are no standards in this game of knock-off wheels, just the temptation to make them as cheap as possible to maximise margins. Thats the price some will pay for vanity.

just to reiterate the point

i cant believe people are still buying Fake brides and nardis, having first hand seeing both snap clean in half is not something that anyone should take a risk on to save a few hundred dollars. if you cant afford the real thing then dont buy it, save your money, or just use standard gear that at least wont try and kill you. If you believe the BS about its made in the same factory and just doesn't have the tags your an idiot

And at the end of the day when you put the real and fake together and have a good look there like apples and oranges. They only look the same in shitty pictures on the internet

28519110150266535287946.jpg

Ke55pig, on 09 October 2011 - 05:57 PM, said:

there 970 on g7 or sopmething like that dont really wanna spend that much

what about a clutch from RDA (brake supplier)? http://www.ebay.com....=item19c4374ba8 $345 del.

exedy STD for $324 del. http://www.ebay.com....=item4cf7168ade

exedy HD for $440 del. http://www.ebay.com....=item335f70f251

depends on your budget for $1k you can get a Nismo setup http://www.ebay.com....=item255aba6fdc

Cheers mate but there all push type clutches

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...