Jump to content
SAU Community

Recommended Posts

i know there is quite a few threads out there about this and i've read through a lot of them

i probably see redline mentioned the most and for every post for redline there is someone to post against it for whatever reason, as well as motul

i've just bought a gt-t, i've already done the engine oil and will be looking to do the g/box and diff soon.

i don't mind spending money for decent quality gear

is there really a problem with redline (seen a lot of people mention it's not for gearboxes with syncros)? though i've not seen that for sale at autobarn/supercheap here in brissy

same goes for motul?

or should i be just looking at castrol gear?

thanks

Link to comment
https://www.sau.com.au/forums/topic/365686-gearboxdiff-oils/
Share on other sites

shit wrong forum section

yeah that seems to be what a lot of people are saying

redline lightweight shock proof?

For what it's worth the gearbox is in really good condition the gears practically click into place, can be hardish to get into first and 2nd when cold though. No crunching

should i go redline mt90?

Edited by mystery_kid

I think the reason alot doubt on the redline is because it is made for racing not daily driving so there is no real need to put it in a street car..same goes for stuff like motul 300v chrono engine oil.its not designed for driving to the shops its designed to go round a track at 200+kmph so putting it in your daily is not only a waste of money it could potentially do more harm than good

so the question is what are you using the car for..

anyway there is a whole thread on driveline oils if you cant figure it out for yourself you havent read the thread properly and asking again here isn't going to give you a NEW answer because we have all read the same thread..

At the very start there is this

For a sticky.............................

What we use;

4WD Transfer = Castrol Transmax Z

Automatic Transmission = Castrol Transmax Z

Manual Transmission = Castrol Syntrans 75W-85 or Castrol Syntrax 75W-90

Differential = Castrol SAF-XA

this man races cars, I believe with some success so maybe he knows a little about oils..

However if you are thrashing the crap out of your car sideways well you may think you want a little extra protection so you could spend on the redline, just remember its designed for high powered racing if this isnt you its a waste of moeny.

So the question is, are you racing a high powered skyline or just driving a skyline?

yeah arthur, i completely forgot about this section of the forum when i posted this thread, i originally posted it in another section it was moved here by an admin

i've been through that thread and yeah i will go with castrol

it's a daily with maybe 3 or maximum 4 track days a year in it

dont get the vmx-80..

I did cause it was cheap but its junk, well its ok once it warms up, but it takes half an hour to warm up :)

Get a multigrade, Ill be getting the syntrans or even the penrite gear oil is ok too I think, it feels good in my diff anyway

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
    • I'd say it's a fair bet that the feed and return fluid lines will be in different enough spots that you would need to come up with a way to cut the originals short and adapt with new hard line adaption or braided teflon hoses or somesuch. But really, you have the car, you have the photos of the DMAX rack - you should be able to go out there and see for yourself whether they're in the same or different spots.
    • I've been doing some looking around and honestly was just considering throwing a new rack at it. I saw that the dmax silvia rack bolts up into the 33 with the silvia bushings but not sure if the high pressure lines will sit in the correct spot. I believe other version of the 33 rack are the same/similar to the racks that can be opened up without as much fuss so I assume the dmax rack would fit but any ideas?
    • I've never played with one, but I would expect that you are correct. That slot looks like it is intended to be used to unscrew the end, and the flats on the body would be better than grabbing it around the round bit with a pipe wrench. So, yeah, probably unscrews. You'll probably have to make a tool to drive in that slot.
×
×
  • Create New...